Citrix Virtual Apps and Desktops SDK

New-Acctidentitypool

August 3, 2023

Contributed by:

Creates a new identity pool.

Syntax

New-AcctIdentityPool -IdentityPoolName <String> [-NamingScheme <String>] [-NamingSchemeType <ADIdentityNamingScheme>] [-OU <String>] [-Domain <String>] [-AllowUnicode] [-StartCount <Int32>] [-Scope <String[]>] [-TenantId <Guid>] [-ZoneUid <Guid>] [-LoggingId <Guid>] [-BearerToken <String>] [-AdminAddress <String>] [<CommonParameters>]
<!--NeedCopy-->

Detailed Description

Provides the ability to create identity pools that can be used to store AD computer accounts.

The naming scheme, naming scheme type, and domain must be specified if the identity pool is to be used to create new accounts.

Each identity pool is tied to a single domain. All the identities in an identity pool belong to the same domain. If the domain is not specified by a parameter to this command the domain will be set when an account is imported into it.

Parameters

Name	Description	Required?	Pipeline Input	Default Value
IdentityPoolName	The name of the identity pool. This must not contain any of the following characters \/;:#.*?=<>	”“’	true	false
NamingScheme	Defines the template name for AD accounts created in the identity pool. The scheme can consist of fixed characters and a variable part defined by ‘#’ characters. There can be only one variable region defined. The number of ‘#’ characters defines the minimum length of the variable region. For example, a naming scheme of H#### could create accounts called H0001, H0002 (for a numeric scheme type) or HAAAA, HAAAB (for an alphabetic type). Citrix recommends that you define a naming scheme that will not clash with accounts which already exist in AD; account creation will fail if a clash occurs. There are restrictions on what constitutes a valid computer name: Minimum name length: 2 (DNS) Maximum name length: 15 bytes (NetBIOS) The following characters are not allowed in a computer name: backslash () slash mark (/) colon (:) asterisk (*) question mark (?) quotation mark (“) less than sign (<) greater than sign (>) vertical bar (	) comma (,) tilde (~) exclamation point (!) at sign (@) number sign (#) dollar sign ($) percent (%) caret (^) ampersand (&) apostrophe (’) parenthesis (()) braces ({}) underscore (_) The following names are reserved and must not be used at the end of the naming scheme: -GATEWAY -GW -TAC Names must not start with a period (NetBIOS). Names must not be composed entirely of numbers (NetBIOS). Names must not contain a blank or space characters (DNS).	false	false
NamingSchemeType	The type of naming scheme. This can be Numeric or Alphabetic. This defines the format of the variable part of the AD account names that will be created.	false	false	Numeric
OU	The OU that computer accounts will be created into. If this is not specified, accounts are created into the default account container specified by AD. This is the ‘Computers’ container for out-of-the-box installations of AD. The OU must be a valid AD container and of the domain specified for the pool;	false	false
Domain	The AD domain name for the pool. Specify this in FQDN format; for example, MyDomain.com.	false	false
AllowUnicode	Allow the naming scheme to have characters other than alphanumeric characters.	false	false
StartCount	Defines the next number that will be used if creating new AD accounts for the identity pool.	false	false
Scope	The administration scopes to be applied to the new identity pool.	false	false
TenantId	Specifies identity of tenant associated with Identity Pool. Must always be specified in multitenant sites, must not be specified otherwise.	false	false
ZoneUid	The UID that corresponds to the Zone in which these AD accounts will be created. This is only intended to be used for Citrix Cloud Delivery Controllers.	false	false
LoggingId	Specifies the identifier of the high-level operation this cmdlet call forms a part of. Citrix Studio and Director typically create high-level operations. PowerShell scripts can also wrap a series of cmdlet calls in a high-level operation by way of the Start-LogHighLevelOperation and Stop-LogHighLevelOperation cmdlets.	false	false
BearerToken	Specifies the bearer token assigned to the calling user	false	false
AdminAddress	Specifies the address of a XenDesktop controller the PowerShell snap-in will connect to. You can provide this as a host name or an IP address.	false	false	Localhost. Once a value is provided by any cmdlet, this value becomes the default.

Input Type

Return Values

Citrix.Adidentity.Sdk.Identitypool
This Object Provides Details Of The Identity Pool And Contains The Following Information:
Identitypoolname <String>
The Name Of The Identity Pool.
Identitypooluid <Guid>
The Unique Identifier For The Identity Pool.
Namingscheme <String>
The Naming Scheme For The Identity Pool.
Namingschemetype <Citrix.Xdinterservicetypes.Adidentitynamingscheme>
The Naming Scheme Type For The Identity Pool. This Can Be One Of The Following:
Numeric - Naming Scheme Uses Numeric Indexes
Alphabetic - Naming Scheme Uses Alphabetic Indexes
Startcount <Int>
The Next Index To Be Used When Creating An Identity From The Identity Pool.
Ou <String>
The Active Directory Distinguished Name For The Ou In Which Accounts Created From This Identity Pool Will Be Created.
Domain <String>
The Active Directory Domain That Accounts In The Pool Belong To.
Lock <Boolean>
Indicates If The Identity Pool Is Locked.

Notes

In the case of failure, the following errors can result.
Error Codes
———–
UnableToConvertDomainName
Unable to convert domain name to DNS format.
NamingSchemeNotEnoughCharacters
Naming scheme does not have enough characters specified.
NamingSchemeTooManyCharacters
Naming scheme has too many characters specified.
NamingSchemeIllegalCharacter
Naming scheme contains illegal characters.
NamingSchemeMayNotStartWithPeriod
Naming scheme starts with a period (.) character.
NamingSchemeMayNotBeAllNumbers
Naming scheme contains only numbers.
NamingSchemeMissingNumericSpecifications
Naming scheme does not contain any variable specification (i.e. no ‘#’ characters are specified).
NamingSchemeHasMoreThanOneSetOfHashes
Naming scheme has more than one variable region (i.e. there are ‘#’ characters separated by other characters).
IdentityPoolDuplicateObjectExists
An identity pool with the same name already exists.
IdentityPoolOUInvalid
Identity Pool OU invalid as it does not exist.
IdentityPoolOUOfWrongDomain
IdentityPool OU invalid as it refers to a different domain to the domain specified for the pool.
InvalidIdentityPoolParameterCombination
Caused by either of the following validation errors:
* If an OU is specified then a domain must also be specified.
* NamingScheme, NamingSchemeType and Domain must all be present if any of these are specified.
NamingSchemeIllegalComputerName
The naming scheme supplied is not valid.
PermissionDenied
The user does not have administrative rights to perform this operation.
ConfigurationLoggingError
The operation could not be performed because of a configuration logging error
DatabaseError
An error occurred in the service while attempting a database operation.
DatabaseNotConfigured
The operation could not be completed because the database for the service is not configured.
ServiceStatusInvalidDb
An error occurred in the service while attempting a database operation - communication with the database failed for
for various reasons.
CommunicationError
An error occurred while communicating with the service.
ExceptionThrown
An unexpected error occurred. To locate more details, see the Windows event logs on the controller being used or examine the XenDesktop logs.

Examples

Example 1

c:\PS>New-AcctIdentityPool -IdentityPoolName MyPool -NamingScheme Acc#### -Domain MyDomain.com -NamingSchemeType Numeric

IdentityPoolName : MyPool

IdentityPoolUid  : 22072d9e-6a8f-494b-a5bc-2ef18ca4b915

NamingScheme     : Acc####

NamingSchemeType : Numeric

StartCount       : 1

OU               :

Domain           : MyDomain.com

Lock             : False
<!--NeedCopy-->

Description

Create a new identity pool from which accounts can be created in the domain called “MyDomain.com” using a numeric scheme of the format Acc####. The first account that will be created from this identity pool definition is Acc0001.<br>New AD accounts can be imported into this pool too, but must be from the Domain “MyDomain.com”.

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

New-Acctidentitypool

August 3, 2023

Contributed by:

August 3, 2023

Contributed by:

New-Acctidentitypool

Syntax

Detailed Description

Related Commands

Parameters

Input Type

Return Values

Notes

Examples

Example 1

Description

In this article