-
Understanding the Citrix Virtual Apps and Desktops Administration Model
-
-
-
-
-
Set-BrokerRebootScheduleV2
-
-
-
-
-
-
-
-
-
-
-
This content has been machine translated dynamically.
Dieser Inhalt ist eine maschinelle Übersetzung, die dynamisch erstellt wurde. (Haftungsausschluss)
Cet article a été traduit automatiquement de manière dynamique. (Clause de non responsabilité)
Este artículo lo ha traducido una máquina de forma dinámica. (Aviso legal)
此内容已经过机器动态翻译。 放弃
このコンテンツは動的に機械翻訳されています。免責事項
이 콘텐츠는 동적으로 기계 번역되었습니다. 책임 부인
Este texto foi traduzido automaticamente. (Aviso legal)
Questo contenuto è stato tradotto dinamicamente con traduzione automatica.(Esclusione di responsabilità))
This article has been machine translated.
Dieser Artikel wurde maschinell übersetzt. (Haftungsausschluss)
Ce article a été traduit automatiquement. (Clause de non responsabilité)
Este artículo ha sido traducido automáticamente. (Aviso legal)
この記事は機械翻訳されています.免責事項
이 기사는 기계 번역되었습니다.책임 부인
Este artigo foi traduzido automaticamente.(Aviso legal)
这篇文章已经过机器翻译.放弃
Questo articolo è stato tradotto automaticamente.(Esclusione di responsabilità))
Translation failed!
Set-BrokerRebootScheduleV2
Updates the values of one or more desktop group reboot schedules.
Syntax
Set-BrokerRebootScheduleV2
[-InputObject] <RebootScheduleV2[]>
[-PassThru]
[-Day <RebootScheduleDays>]
[-DayInMonth <RebootScheduleDays>]
[-Description <String>]
[-Enabled <Boolean>]
[-Frequency <RebootScheduleFrequency>]
[-FrequencyFactor <Int32>]
[-IgnoreMaintenanceMode <Boolean>]
[-MaxOvertimeStartMins <Int32>]
[-RebootDuration <Int32>]
[-RestrictToTag <String>]
[-StartDate <String>]
[-StartTime <TimeSpan>]
[-UseNaturalReboot <Boolean>]
[-WarningDuration <Int32>]
[-WarningMessage <String>]
[-WarningRepeatInterval <Int32>]
[-WarningTitle <String>]
[-WeekInMonth <RebootScheduleWeeks>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Set-BrokerRebootScheduleV2
[-Name] <String>
[-PassThru]
[-Day <RebootScheduleDays>]
[-DayInMonth <RebootScheduleDays>]
[-Description <String>]
[-Enabled <Boolean>]
[-Frequency <RebootScheduleFrequency>]
[-FrequencyFactor <Int32>]
[-IgnoreMaintenanceMode <Boolean>]
[-MaxOvertimeStartMins <Int32>]
[-RebootDuration <Int32>]
[-RestrictToTag <String>]
[-StartDate <String>]
[-StartTime <TimeSpan>]
[-UseNaturalReboot <Boolean>]
[-WarningDuration <Int32>]
[-WarningMessage <String>]
[-WarningRepeatInterval <Int32>]
[-WarningTitle <String>]
[-WeekInMonth <RebootScheduleWeeks>]
[-LoggingId <Guid>]
[<CitrixCommonParameters>]
[<CommonParameters>]
<!--NeedCopy-->
Description
The Set-BrokerRebootScheduleV2 cmdlet is used to alter the settings of an existing desktop group reboot schedule.
Examples
EXAMPLE 1
Sets the reboot schedule for the reboot schedule named Accounting to display a message with the title “WARNING: Reboot pending” and body “Save your work” ten minutes prior to rebooting each machine. The message is displayed in every user session on that machine.
Set-BrokerRebootScheduleV2 -Name Accounting -WarningMessage "Save your work" -WarningDuration 10 -WarningTitle "WARNING: Reboot pending"
<!--NeedCopy-->
EXAMPLE 2
Sets all weekly reboot schedules to run on Friday.
Get-BrokerRebootScheduleV2 -Frequency Weekly | Set-BrokerRebootScheduleV2 -Day Friday
<!--NeedCopy-->
EXAMPLE 3
Sets the reboot schedule for the reboot schedule having Uid 17 to display the message “Rebooting in %m% minutes.” Fifteen, ten and five minutes prior to rebooting each machine, the message “Rebooting in %m% minutes.” will be displayed in each user session with the pattern ‘%m%’ replaced with the number of minutes until the reboot.
Set-BrokerRebootScheduleV2 17 -WarningMessage "Rebooting in %m% minutes." -WarningDuration 15 -WarningRepeatInterval 5
<!--NeedCopy-->
EXAMPLE 4
Restricts the reboot schedule having uid 12 to only reboot machines within the desktop group tagged with the ‘Finance Dept’ tag.
Set-BrokerRebootScheduleV2 12 -RestrictToTag 'Finance Dept'
<!--NeedCopy-->
Parameters
-InputObject
The reboot schedule to be modified.
| Type: | RebootScheduleV2[] |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True (ByValue) |
| Accept wildcard characters: | False |
-Name
The name of the reboot schedule
| Type: | String |
| Position: | 2 |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True (ByPropertyName) |
| Accept wildcard characters: | True |
-PassThru
This cmdlet does not generate any output, unless you use the PassThru parameter, in which case it returns the affected record.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Day
For weekly schedules, the days of the week on which the scheduled reboot-cycle starts (one or more of Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday).
| Type: | RebootScheduleDays |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DayInMonth
For monthly schedules, the day in the month on which the scheduled reboot-cycle starts (one of Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday).
| Type: | RebootScheduleDays |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
An optional description for the reboot schedule.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Enabled
Boolean that indicates if the reboot schedule is to be enabled or disabled.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Frequency
Frequency with which this schedule runs (either Weekly or Daily or Monthly).
| Type: | RebootScheduleFrequency |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FrequencyFactor
The frequency factor for the reboot schedule. It indicates how often the schedule should run with respect to the frequency. For example, if the FrequencyFactor is set to 2, it means every two days from the StartDate when the Frequency is Daily, every two weeks from the StartDate when the Frequency is Weekly, and similarly for monthly. It defaults to 1 if not provided. The StartDate needs to be set if the frequency factor is greater than 1.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IgnoreMaintenanceMode
Boolean value to reboot machines in maintenance mode
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MaxOvertimeStartMins
Maximum delay in minutes after which the scheduled reboot will not take place
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RebootDuration
Approximate maximum number of minutes over which the scheduled reboot cycle runs.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RestrictToTag
If specified, restricts the reboot schedule to only those machines in the desktop group with the specified tag. Specify $null to remove any tag restriction.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartDate
The date on which the first schedule is expected to run, date is in ISO 8601 Format (YYYY-MM-DD). The actual start date to match the frequency pattern need not be provided. For example, if today is Monday and the schedule is set to run every Sunday for every four weeks, there is no need to identify the date on which Sunday falls after four weeks. Today’s date ((Get-Date).Date.ToString(‘yyyy-MM-dd’)) can be provided and the service would adjust the start date to reflect the actual date i.e, the Sunday four weeks from today. Get-BrokerRebootScheduleV2 cmdlet will reflect the actual start date.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StartTime
Time of day at which the scheduled reboot cycle starts (HH:MM).
| Type: | TimeSpan |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UseNaturalReboot
Boolean value indicating whether the machines should reboot whenever they happen to have no sessions, rather than at equally spaced times within the cycle duration.
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WarningDuration
Time prior to the initiation of a machine reboot at which warning message is displayed in all user sessions on that machine. If the warning duration is zero then no message is displayed. In some cases the time required to process a reboot schedule may exceed the RebootDuration time by up to the WarningDuration value; Citrix recommends that the WarningDuration is kept small relative to the RebootDuration value.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WarningMessage
Warning message displayed in user sessions on a machine scheduled for reboot. If the message is blank then no message is displayed. The optional pattern ‘%m%’ is replaced by the number of minutes until the reboot.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WarningRepeatInterval
Time to wait after the previous reboot warning before displaying the warning message in all user sessions on that machine again. If the warning repeat interval is zero then the warning message is not displayed after the initial warning.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WarningTitle
The window title used when showing the warning message in user sessions on a machine scheduled for reboot.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WeekInMonth
For monthly schedules, the week in the month on which the scheduled reboot-cycle starts (one of First, Second, Third, Fourth, Last).
| Type: | RebootScheduleWeeks |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LoggingId
Specifies the identifier of the high level operation that this cmdlet call forms a part of. Desktop Studio and Desktop Director typically create High Level Operations. PowerShell scripts can also wrap a series of cmdlet calls in a High Level Operation by way of the Start-LogHighLevelOperation and Stop-LogHighLevelOperation cmdlets.
| Type: | Guid |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
CitrixCommonParameters
This cmdlet supports the common Citrix parameters: -AdminAddress, -AdminClientIP, -BearerToken, -TraceParent, -TraceState and -VirtualSiteId. For more information, see about_CitrixCommonParameters.
CommonParameters
This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.
Inputs
Citrix.Broker.Admin.SDK.RebootScheduleV2
Reboot schedules may be specified through pipeline input.
Outputs
None
By default, this cmdlet returns no output.
Related Links
Share
Share
In this article
This Preview product documentation is Citrix Confidential.
You agree to hold this documentation confidential pursuant to the terms of your Citrix Beta/Tech Preview Agreement.
The development, release and timing of any features or functionality described in the Preview documentation remains at our sole discretion and are subject to change without notice or consultation.
The documentation is for informational purposes only and is not a commitment, promise or legal obligation to deliver any material, code or functionality and should not be relied upon in making Citrix product purchase decisions.
If you do not agree, select I DO NOT AGREE to exit.