ADC CLI Commands

service

The following operations can be performed on “service”:

set unbind bind rm disable rename stat add unset enable show

set service

Modifies the parameters of an existing service.

Synopsis

set service @ \[-IPAddress <ip\_addr|ipv6\_addr|\*>@] \[-maxClient <positive\_integer>] \[-maxReq <positive\_integer>] \[-cacheable \( YES | NO )] \[-cip \( ENABLED | DISABLED ) \[]] \[-usip \( YES | NO )] \[-pathMonitor \( YES | NO )] \[-pathMonitorIndv \( YES | NO )] \[-useproxyport \( YES | NO )] \[-sp \( ON | OFF )] \[-rtspSessionidRemap \( ON | OFF )] \[-healthMonitor \( YES | NO )] \[-cltTimeout ] \[-svrTimeout ] \[-CustomServerID ] \[-CKA \( YES | NO )] \[-TCPB \( YES | NO )] \[-CMP \( YES | NO )] \[-maxBandwidth <positive\_integer>] \[-accessDown \( YES | NO )] \[-monThreshold <positive\_integer>] \[-weight <positive\_integer> ] \[-downStateFlush \( ENABLED | DISABLED )] \[-tcpProfileName ] \[-httpProfileName ] \[-contentInspectionProfileName ] \[-hashId <positive\_integer>] \[-comment ] \[-appflowLog \( ENABLED | DISABLED )] \[-netProfile ] \[-processLocal \( ENABLED | DISABLED )] \[-dnsProfileName ] \[-monConnectionClose \( RESET | FIN )]

Arguments

name Name of the service for which to modify parameters.

IPAddress The new IP address of the service.

maxClient Maximum number of simultaneous open connections to the service. Minimum value: 0 Maximum value: 4294967294

maxReq Maximum number of requests that can be sent on a persistent connection to the service. Note: Connection requests beyond this value are rejected. Minimum value: 0 Maximum value: 65535

cacheable Use the transparent cache redirection virtual server to forward requests to the cache server. Note: Do not specify this parameter if you set the Cache Type parameter.

Possible values: YES, NO Default value: NO

cip Before forwarding a request to the service, insert an HTTP header with the client’s IPv4 or IPv6 address as its value. Used if the server needs the client’s IP address for security, accounting, or other purposes, and setting the Use Source IP parameter is not a viable option.

Possible values: ENABLED, DISABLED

cipHeader Name for the HTTP header whose value must be set to the IP address of the client. Used with the Client IP parameter. If you set the Client IP parameter, and you do not specify a name for the header, the appliance uses the header name specified for the global Client IP Header parameter (the cipHeader parameter in the set ns param CLI command or the Client IP Header parameter in the Configure HTTP Parameters dialog box at System > Settings > Change HTTP parameters). If the global Client IP Header parameter is not specified, the appliance inserts a header with the name “client-ip.”

usip Use the client’s IP address as the source IP address when initiating a connection to the server. When creating a service, if you do not set this parameter, the service inherits the global Use Source IP setting (available in the enable ns mode and disable ns mode CLI commands, or in the System > Settings > Configure modes > Configure Modes dialog box). However, you can override this setting after you create the service.

Possible values: YES, NO

pathMonitor Path monitoring for clustering

Possible values: YES, NO

pathMonitorIndv Individual Path monitoring decisions

Possible values: YES, NO

useproxyport Use the proxy port as the source port when initiating connections with the server. With the NO setting, the client-side connection port is used as the source port for the server-side connection. Note: This parameter is available only when the Use Source IP (USIP) parameter is set to YES.

Possible values: YES, NO

sp Enable surge protection for the service.

Possible values: ON, OFF

rtspSessionidRemap Enable RTSP session ID mapping for the service.

Possible values: ON, OFF Default value: OFF

healthMonitor Monitor the health of this service. Available settings function as follows: YES - Send probes to check the health of the service. NO - Do not send probes to check the health of the service. With the NO option, the appliance shows the service as UP at all times.

Possible values: YES, NO Default value: YES

cltTimeout Time, in seconds, after which to terminate an idle client connection. Maximum value: 31536000

svrTimeout Time, in seconds, after which to terminate an idle server connection. Maximum value: 31536000

CustomServerID Unique identifier for the service. Used when the persistency type for the virtual server is set to Custom Server ID. Default value: “None”

CKA Enable client keep-alive for the service.

Possible values: YES, NO

TCPB Enable TCP buffering for the service.

Possible values: YES, NO

CMP Enable compression for the service.

Possible values: YES, NO

maxBandwidth Maximum bandwidth, in Kbps, allocated to the service. Minimum value: 0 Maximum value: 4294967287

accessDown Use Layer 2 mode to bridge the packets sent to this service if it is marked as DOWN. If the service is DOWN, and this parameter is disabled, the packets are dropped.

Possible values: YES, NO Default value: NO

monThreshold Minimum sum of weights of the monitors that are bound to this service. Used to determine whether to mark a service as UP or DOWN. Minimum value: 0 Maximum value: 65535

weight Weight to assign to the monitor-service binding. When a monitor is UP, the weight assigned to its binding with the service determines how much the monitor contributes toward keeping the health of the service above the value configured for the Monitor Threshold parameter. Minimum value: 1 Maximum value: 100

monitorName Name of the monitor bound to the specified service.

downStateFlush Flush all active transactions associated with a service whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.

Possible values: ENABLED, DISABLED Default value: ENABLED

tcpProfileName Name of the TCP profile that contains TCP configuration settings for the service.

httpProfileName Name of the HTTP profile that contains HTTP configuration settings for the service.

contentInspectionProfileName Name of the ContentInspection profile that contains IPS/IDS communication related setting for the service

hashId A numerical identifier that can be used by hash based load balancing methods. Must be unique for each service. Minimum value: 1

comment Any information about the service.

appflowLog Enable logging of AppFlow information.

Possible values: ENABLED, DISABLED Default value: ENABLED

netProfile Network profile to use for the service.

processLocal By turning on this option packets destined to a service in a cluster will not under go any steering. Turn this option for single packet request response mode or when the upstream device is performing a proper RSS for connection based distribution.

Possible values: ENABLED, DISABLED Default value: DISABLED

dnsProfileName Name of the DNS profile to be associated with the service. DNS profile properties will applied to the transactions processed by a service. This parameter is valid only for ADNS and ADNS-TCP services.

monConnectionClose Close monitoring connections by sending the service a connection termination message with the specified bit set.

Possible values: RESET, FIN Default value: NONE

Example

set service http_svc -maxClient 100 The following command sets IP address 10.102.27.53 for service svc1, 10.102.27.54 for svc2 and 10.102.27.55 for svc3. set service svc[1-3] -IPAddress 10.102.27.[53-55]

unbind service

Unbinds a policy or monitor from the specified service.

Synopsis

unbind service @ \(-policyName | -monitorName @)

Arguments

name Name of the service from which to unbind a policy or monitor.

policyName Name of the policy to unbind.

monitorName Name of the monitor assigned to the service.

Example

unbind service http_svc -policyName pol1 To unbind a policy called pol1 on services svc1, svc2 and svc3, use the following command: unbind service svc[1-3] -policyName pol1

bind service

Binds a policy or a monitor to a service.

Synopsis

bind service @ \(-policyName | \(-monitorName @ \[-monState \( ENABLED | DISABLED )] \[-weight <positive\_integer>] \[-passive]))

Arguments

name Name of the service to which to bind a policy or monitor.

policyName Name of the policy to bind to the service.

monitorName Name of the monitor to bind to the service.

monState Initial state of the service.

Possible values: ENABLED, DISABLED Default value: ENABLED

weight Weight to assign to the monitor-service binding. When a monitor is UP, the weight assigned to its binding with the service determines how much the monitor contributes toward keeping the health of the service above the value configured for the Monitor Threshold parameter. Default value: 1 Minimum value: 1 Maximum value: 100

passive Indicates if load monitor is passive. A passive load monitor does not remove service from LB decision when threshold is breached.

Example

bind service svc1 -policyName pol1 To bind svc1, svc2 and svc3 to the policy pol1 you can use the following command: bind service svc[1-3] -policyName pol1

rm service

Removes a service.

Synopsis

rm service @

Arguments

name Name of the service.

Example

rm service http_svc To remove services svc1, svc2 and svc3 in one go use the following command: rm service svc[1-3]

disable service

Disables a service.

Synopsis

disable service @ \[] \[-graceFul \( YES | NO )]

Arguments

name Name of the service.

delay Time, in seconds, allocated to the Citrix ADC for a graceful shutdown of the service. During this period, new requests are sent to the service only for clients who already have persistent sessions on the appliance. Requests from new clients are load balanced among other available services. After the delay time expires, no requests are sent to the service, and the service is marked as unavailable (OUT OF SERVICE).

graceFul Shut down gracefully, not accepting any new connections, and disabling the service when all of its connections are closed.

Possible values: YES, NO Default value: NO

Example

disable service http_svc 10 To disable svc1, svc2 and svc3 in one go use the following command: disable service svc[1-3] 10

rename service

Renames a service.

Synopsis

rename service @ @

Arguments

name Existing name of the service to be renamed.

newName New name for the service. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters.

Example

rename service svc1 svcnew

stat service

Displays statistics that have been collected for the specified service.

Synopsis

stat service [] \[-detail] \[-fullValues] \[-ntimes <positive\_integer>] \[-logFile <input\_filename>] \[-clearstats \( basic | full )]

Arguments

name Name of the service.

detail Specifies detailed output (including more statistics). The output can be quite voluminous. Without this argument, the output will show only a summary.

fullValues Specifies that numbers and strings should be displayed in their full form. Without this option, long strings are shortened and large numbers are abbreviated

ntimes The number of times, in intervals of seven seconds, the statistics should be displayed. Default value: 1 Minimum value: 0

logFile The name of the log file to be used as input.

clearstats Clear the statsistics / counters

Possible values: basic, full

Output

count devno stateflag

Counters

Throughput (Mbps) (Throughput) Number of bytes received or sent by this service (Mbps).

Average server TTFB (SvrTTFB) Average TTFB between the Citrix ADC and the server. TTFB is the time interval between sending the request packet to a service and receiving the first response from the service

IP address (IP) The IP address on which the service is running.

Port (port) The port on which the service is running.

Service type (Type) The service type of this service.Possible values are ADNS, DNS, MYSQL, RTSP, SSL_DIAMETER, ADNS_TCP, DNS_TCP, NNTP, SIP_UDP, SSL_TCP, ANY, FTP, RADIUS, SNMP, TCP, DHCPRA, HTTP, RDP, SSL, TFTP, DIAMETER, MSSQL, RPCSVR, SSL_BRIDGE, UDP

State Current state of the server. There are seven possible values: UP(7), DOWN(1), UNKNOWN(2), BUSY(3), OFS(Out of Service)(4), TROFS(Transition Out of Service)(5), TROFS_DOWN(Down When going Out of Service)(8)

Requests (Req) Total number of requests received on this service or virtual server. (This applies to HTTP/SSL services and servers.)

Responses (Rsp) Number of responses received on this service or virtual server. (This applies to HTTP/SSL services and servers.)

Request bytes (Reqb) Total number of request bytes received on this service or virtual server.

Response bytes (Rspb) Number of response bytes received by this service or virtual server.

Current client connections (ClntConn) Number of current client connections.

Requests in surge queue (SurgeQ) Number of requests in the surge queue.

Current server connections (SvrConn) Number of current connections to the actual servers behind the virtual server.

Current Server Est connections (SvrEstConn) Number of server connections in ESTABLISHED state.

Connections in reuse pool (ReuseP) Number of requests in the idle queue/reuse pool.

Maximum server connections (MaxConn) Maximum open connections allowed on this service.

Current load on the service (Load) Load on the service that is calculated from the bound load based monitor.

Current flags on the service (CurtFlags) Current flags on the service for internal use in display handlers.

Total transactions for server TTLB (totSvrTTLBTransactions) Total transactions where server TTLB is calculated.

Tolerating TTLB Transactions (toleratingTTLBTransactions) Tolerable transactions based on APDEX threshold (>T && <4T).

Frustrating TTLB Transactions (frustratingTTLBTransactions) Frustrating transactions based on APDEX threshold (>4T).

Service hits (Hits) Number of times that the service has been provided.

ActvTrans Number of active transactions handled by this service. (Including those in the surge queue.) Active Transaction means number of transactions currently served by the server including those waiting in the SurgeQ

Total Packets rcvd (PktRx) Total number of packets received by this service or virtual server.

Total Packets sent (PktTx) Total number of packets sent.

add service

Creates a service on the Citrix ADC. If the service is domain based, before you create the service, create the server entry by using the add server command. Then, in this command, specify the Server parameter.

Synopsis

add service @ \(@ | @) \[-clearTextPort ] \[-cacheType ] \[-maxClient <positive\_integer>] \[-healthMonitor \( YES | NO )] \[-maxReq <positive\_integer>] \[-cacheable \( YES | NO )] \[-cip \( ENABLED | DISABLED ) \[]] \[-usip \( YES | NO )] \[-pathMonitor \( YES | NO )] \[-pathMonitorIndv \( YES | NO )] \[-useproxyport \( YES | NO )] \[-sp \( ON | OFF )] \[-rtspSessionidRemap \( ON | OFF )] \[-cltTimeout ] \[-svrTimeout ] \[-CustomServerID ] \[-CKA \( YES | NO )] \[-TCPB \( YES | NO )] \[-CMP \( YES | NO )] \[-maxBandwidth <positive\_integer>] \[-accessDown \( YES | NO )] \[-monThreshold <positive\_integer>] \[-state \( ENABLED | DISABLED )] \[-downStateFlush \( ENABLED | DISABLED )] \[-tcpProfileName ] \[-httpProfileName ] \[-contentInspectionProfileName ] \[-hashId <positive\_integer>] \[-comment ] \[-appflowLog \( ENABLED | DISABLED )] \[-netProfile ] \[-td <positive\_integer>] \[-processLocal \( ENABLED | DISABLED )] \[-dnsProfileName ] \[-monConnectionClose \( RESET | FIN )]

Arguments

name Name for the service. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the service has been created.

IP IP to assign to the service.

serverName Name of the server that hosts the service.

serviceType Protocol in which data is exchanged with the service.

Possible values: HTTP, FTP, TCP, UDP, SSL, SSL_BRIDGE, SSL_TCP, DTLS, NNTP, RPCSVR, DNS, ADNS, SNMP, RTSP, DHCPRA, ANY, SIP_UDP, SIP_TCP, SIP_SSL, DNS_TCP, ADNS_TCP, MYSQL, MSSQL, ORACLE, RADIUS, RADIUSListener, RDP, DIAMETER, SSL_DIAMETER, TFTP, SMPP, PPTP, GRE, SYSLOGTCP, SYSLOGUDP, FIX, SSL_FIX, USER_TCP, USER_SSL_TCP, QUIC, IPFIX, LOGSTREAM

port Port number of the service.

clearTextPort Port to which clear text data must be sent after the appliance decrypts incoming SSL traffic. Applicable to transparent SSL services. Minimum value: 1

cacheType Cache type supported by the cache server.

Possible values: TRANSPARENT, REVERSE, FORWARD

maxClient Maximum number of simultaneous open connections to the service. Minimum value: 0 Maximum value: 4294967294

healthMonitor Monitor the health of this service. Available settings function as follows: YES - Send probes to check the health of the service. NO - Do not send probes to check the health of the service. With the NO option, the appliance shows the service as UP at all times.

Possible values: YES, NO Default value: YES

maxReq Maximum number of requests that can be sent on a persistent connection to the service. Note: Connection requests beyond this value are rejected. Minimum value: 0 Maximum value: 65535

cacheable Use the transparent cache redirection virtual server to forward requests to the cache server. Note: Do not specify this parameter if you set the Cache Type parameter.

Possible values: YES, NO Default value: NO

cip Before forwarding a request to the service, insert an HTTP header with the client’s IPv4 or IPv6 address as its value. Used if the server needs the client’s IP address for security, accounting, or other purposes, and setting the Use Source IP parameter is not a viable option.

Possible values: ENABLED, DISABLED

cipHeader Name for the HTTP header whose value must be set to the IP address of the client. Used with the Client IP parameter. If you set the Client IP parameter, and you do not specify a name for the header, the appliance uses the header name specified for the global Client IP Header parameter (the cipHeader parameter in the set ns param CLI command or the Client IP Header parameter in the Configure HTTP Parameters dialog box at System > Settings > Change HTTP parameters). If the global Client IP Header parameter is not specified, the appliance inserts a header with the name “client-ip.”

usip Use the client’s IP address as the source IP address when initiating a connection to the server. When creating a service, if you do not set this parameter, the service inherits the global Use Source IP setting (available in the enable ns mode and disable ns mode CLI commands, or in the System > Settings > Configure modes > Configure Modes dialog box). However, you can override this setting after you create the service.

Possible values: YES, NO

pathMonitor Path monitoring for clustering

Possible values: YES, NO

pathMonitorIndv Individual Path monitoring decisions

Possible values: YES, NO

useproxyport Use the proxy port as the source port when initiating connections with the server. With the NO setting, the client-side connection port is used as the source port for the server-side connection. Note: This parameter is available only when the Use Source IP (USIP) parameter is set to YES.

Possible values: YES, NO

sp Enable surge protection for the service.

Possible values: ON, OFF

rtspSessionidRemap Enable RTSP session ID mapping for the service.

Possible values: ON, OFF Default value: OFF

cltTimeout Time, in seconds, after which to terminate an idle client connection. Maximum value: 31536000

svrTimeout Time, in seconds, after which to terminate an idle server connection. Maximum value: 31536000

CustomServerID Unique identifier for the service. Used when the persistency type for the virtual server is set to Custom Server ID. Default value: “None”

CKA Enable client keep-alive for the service.

Possible values: YES, NO

TCPB Enable TCP buffering for the service.

Possible values: YES, NO

CMP Enable compression for the service.

Possible values: YES, NO

maxBandwidth Maximum bandwidth, in Kbps, allocated to the service. Minimum value: 0 Maximum value: 4294967287

accessDown Use Layer 2 mode to bridge the packets sent to this service if it is marked as DOWN. If the service is DOWN, and this parameter is disabled, the packets are dropped.

Possible values: YES, NO Default value: NO

monThreshold Minimum sum of weights of the monitors that are bound to this service. Used to determine whether to mark a service as UP or DOWN. Minimum value: 0 Maximum value: 65535

state Initial state of the service.

Possible values: ENABLED, DISABLED Default value: ENABLED

downStateFlush Flush all active transactions associated with a service whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.

Possible values: ENABLED, DISABLED Default value: ENABLED

tcpProfileName Name of the TCP profile that contains TCP configuration settings for the service.

httpProfileName Name of the HTTP profile that contains HTTP configuration settings for the service.

contentInspectionProfileName Name of the ContentInspection profile that contains IPS/IDS communication related setting for the service

hashId A numerical identifier that can be used by hash based load balancing methods. Must be unique for each service. Minimum value: 1

comment Any information about the service.

appflowLog Enable logging of AppFlow information.

Possible values: ENABLED, DISABLED Default value: ENABLED

netProfile Network profile to use for the service.

td Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value: 0 Maximum value: 4094

processLocal By turning on this option packets destined to a service in a cluster will not under go any steering. Turn this option for single packet request response mode or when the upstream device is performing a proper RSS for connection based distribution.

Possible values: ENABLED, DISABLED Default value: DISABLED

dnsProfileName Name of the DNS profile to be associated with the service. DNS profile properties will applied to the transactions processed by a service. This parameter is valid only for ADNS and ADNS-TCP services.

monConnectionClose Close monitoring connections by sending the service a connection termination message with the specified bit set.

Possible values: RESET, FIN Default value: NONE

Example

add service http_svc 10.102.1.112 http 80 The below command adds the service web_svc1 for the server web_serv1, web_svc2 for web_serv2 and web_svc3 for web_serv3. add service web_svc[1-3] web_serv[1-3] http 80

unset service

Removes the parameter settings of the specified service. Attributes for which a default value is available revert to their default values..Refer to the set service command for meanings of the arguments.

Synopsis

unset service @ [-maxClient] [-maxReq] [-cacheable] [-cip] [-usip] [-pathMonitor] [-pathMonitorIndv] [-useproxyport] [-sp] [-rtspSessionidRemap] [-CustomServerID] [-CKA] [-TCPB] [-CMP] [-maxBandwidth] [-accessDown] [-monThreshold] [-cltTimeout] [-svrTimeout] [-tcpProfileName] [-httpProfileName] [-contentInspectionProfileName] [-hashId] [-appflowLog] [-netProfile] [-processLocal] [-dnsProfileName] [-monConnectionClose] [-cipHeader] [-healthMonitor] [-downStateFlush] [-comment]

Example

unset service http_svc -maxClient To unset maxclients for services svc1, svc2 and svc3, the following command can be used: unset service svc[1-3] -maxClient

enable service

Enables a service.

Synopsis

enable service @

Arguments

name Name of the service.

Example

enable service http_svc To enable svc1, svc2 and svc3 in one go use the following command: enable service svc[1-3]

show service

Displays a list of all services configured on the Citrix ADC, or the configuration details of the specified service.

Synopsis

show service [ | -all | -internal] show service bindings - alias for 'show svcbindings'

Arguments

name Name of the service for which to display configuration details.

all Display both user-configured and dynamically learned services.

internal Display only dynamically learned services.

Output

numOfconnections This will tell the number of client side connections are still open.

serverName The name of the server for which a service has created.

policyName The name of the policyname for which this service is bound

serviceType The type of service

serviceConfTpye The configuration type of the service

serviceConfType The configuration type of the service

serviceConfType2 The configuration type of the service (Internal/Dynamic/Configured).

port Port number of the service.

value SSL status.

clearTextPort The clear-text port number where clear-text data is sent. Used with SSL offload service

gslb The GSLB option for the corresponding virtual server.

cacheType Cache type supported by the cache server.

maxClient Maximum number of simultaneous open connections to the service.

maxReq Maximum number of requests that can be sent on a persistent connection to the service. Note: Connection requests beyond this value are rejected.

cacheable Use the transparent cache redirection virtual server to forward requests to the cache server. Note: Do not specify this parameter if you set the Cache Type parameter.

cip Before forwarding a request to the service, insert an HTTP header with the client’s IPv4 or IPv6 address as its value. Used if the server needs the client’s IP address for security, accounting, or other purposes, and setting the Use Source IP parameter is not a viable option.

cipHeader The client IP header.

usip The use of client’s IP Address option.

pathMonitor Path monitoring for clustering

pathMonitorIndv Individual Path monitoring for decisions.

useproxyport The use of client’s Port.

sc The state of SureConnect for the service.

weight The weight of the monitor.

state Added this field for getting state value from table.

sp Enable surge protection for the service.

rtspSessionidRemap Enable RTSP session ID mapping for the service.

failedprobes Number of the current failed monitoring probes.

cltTimeout The idle time in seconds after which the client connection is terminated.

totalprobes The total number of probs sent.

svrTimeout The idle time in seconds after which the server connection is terminated.

totalfailedprobes The total number of failed probs.

publicIP public ip

publicPort public port

CustomServerID The identifier for the service. Used when the persistency type is set to Custom Server ID.

serverID The identifier for the service. This is used when the persistency type is set to Custom Server ID.

CKA Enable client keep-alive for the service.

TCPB Enable TCP buffering for the service.

processLocal By turning on this option packets destined to a service in a cluster will not under go any steering. Turn this option for single packet request response mode or when the upstream device is performing a proper RSS for connection based distribution.

CMP Enable compression for the service.

maxBandwidth The maximum bandwidth in kbps allowed for the service

accessDown The option to allow access to disabled or down services. If enabled, all packets to the service are bridged; if disabled, they are dropped.

svrState The state of the service

delay The remaining time in seconds for the service to be disabled

IPAddress The IP address of the server.

monitorName The monitor Names.

monThreshold Minimum sum of weights of the monitors that are bound to this service. Used to determine whether to mark a service as UP or DOWN.

monState The configured state (enable/disable) of the monitor on this server.

monState The running state of the monitor on this service.

monStatCode The code indicating the monitor response.

lastresponse The string form of monstatcode.

responseTime Response time of this monitor.

riseApbrStatsMsgCode The code indicating the rise apbr status.

riseApbrStatsMsgCode2 The code indicating other rise stats.

monStatParam1 First parameter for use with message code.

monStatParam2 Second parameter for use with message code.

monStatParam3 Third parameter for use with message code.

downStateFlush Flush all active transactions associated with a service whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.

stateChangeTimeSec Time when last state change happened. Seconds part.

stateChangeTimemSec Time at which last state change happened. Milliseconds part.

timeSinceLastStateChange Time in milliseconds since the last state change.

ticksSinceLastStateChange Time in 10 millisecond ticks since the last state change.

StateUpdateReason Checks state update reason on the secondary node.

ClMonOwner Tells the mon owner of the service.

ClMonView Tells the view id of the monitoring owner.

tcpProfileName Name of the TCP profile.

httpProfileName Name of the HTTP profile that contains HTTP configuration settings for the service.

contentInspectionProfileName Name of the ContentInspection profile that contains IPS/IDS communication related setting for the service

hashId A numerical identifier that can be used by hash based load balancing methods. Must be unique for each service.

graceFul Indicates graceful shutdown of the service. System will wait for all outstanding connections to this service to be closed before disabling the service.

comment Comments associated with this service.

monitorTotalProbes Total number of probes sent to monitor this service.

monitorTotalFailedProbes Total number of failed probes

monitorCurrentFailedProbes Total number of currently failed probes

stateflag stateflag

healthMonitor Monitor the health of this service. Available settings function as follows: YES - Send probes to check the health of the service. NO - Do not send probes to check the health of the service. With the NO option, the appliance shows the service as UP at all times.

appflowLog Enable logging of AppFlow information.

netProfile Network profile to use for the service.

svccfgFlags Contains the information about config info like internal/configured service

serviceIPstr This field has been intorduced to show the dbs services ip

state Initial state of the service.

weight The weight for the specified monitor.

svcMonFlags to store the flags of monitor bound to it

td Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

passive Indicates if load monitor is passive. A passive load monitor does not remove service from LB decision when threshold is breached.

oracleServerVersion Oracle server version

dnsProfileName Name of the DNS profile to be associated with the service. DNS profile properties will applied to the transactions processed by a service. This parameter is valid only for ADNS and ADNS-TCP services.

monConnectionClose Close monitoring connections by sending the service a connection termination message with the specified bit set.

noDefaultBindings to determine if the configuration will have default ssl CIPHER and ECC curve bindings

devno count

Example

The following is sample output of the show service -all command: 4 configured services: 1) svc1 (10.124.99.12:80) - HTTP State: UP Max Conn: 0 Max Req: 0 Use Source IP: NO Client Keepalive(CKA): NO TCP Buffering(TCPB): NO HTTP Compression(CMP): NO Idle timeout: Client: 180 sec Server: 360 sec Client IP: DISABLED 2) svc_3 (10.100.100.3:53) - DNS State: UP Max Conn: 0 Max Req: 0 Use Source IP: NO Client Keepalive(CKA): NO TCP Buffering(TCPB): NO HTTP Compression(CMP): NO Idle timeout: Client: 180 sec Server: 360 sec Client IP: DISABLED 3) tsvc1 (77.45.32.45:80) - HTTP State: UP Max Conn: 0 Max Req: 0 Use Source IP: NO Client Keepalive(CKA): NO TCP Buffering(TCPB): NO HTTP Compression(CMP): NO Idle timeout: Client: 180 sec Server: 360 sec Client IP: DISABLED 4) foosvc (10.124.99.13:7979) - HTTP State: UP Max Conn: 0 Max Req: 0 Use Source IP: NO Client Keepalive(CKA): NO TCP Buffering(TCPB): NO HTTP Compression(CMP): NO Idle timeout: Client: 180 sec Server: 360 sec Client IP: DISABLED

service