Developer Documentation

ADC CLI Commands

lsn-sipalgprofile

June 28, 2023

Contributed by:

The following operations can be performed on “lsn-sipalgprofile”:

set lsn sipalgprofile

Set LSN SIPALG Profile.

Synopsis

set lsn sipalgprofile \[-dataSessionIdleTimeout <positive\_integer>] \[-sipSessionTimeout <positive\_integer>] \[-registrationTimeout <positive\_integer>] \[-sipsrcportrange <port\[-port]>] \[-sipdstportrange <port\[-port]>] \[-openRegisterPinhole \( ENABLED | DISABLED )] \[-openContactPinhole \( ENABLED | DISABLED )] \[-openViaPinhole \( ENABLED | DISABLED )] \[-openRecordRoutePinhole \( ENABLED | DISABLED )] \[-sipTransportProtocol \( TCP | UDP )] \[-openRoutePinhole \( ENABLED | DISABLED )] \[-rport \( ENABLED | DISABLED )]

Arguments

sipalgprofilename The name of the SIPALG Profile.

dataSessionIdleTimeout Idle timeout for the data channel sessions in seconds. Default value: 120 Minimum value: 0

sipSessionTimeout SIP control channel session timeout in seconds. Default value: 600 Minimum value: 0

registrationTimeout SIP registration timeout in seconds. Default value: 60 Minimum value: 0

sipsrcportrange Source port range for SIP_UDP and SIP_TCP.

sipdstportrange Destination port range for SIP_UDP and SIP_TCP.

openRegisterPinhole ENABLE/DISABLE RegisterPinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

openContactPinhole ENABLE/DISABLE ContactPinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

openViaPinhole ENABLE/DISABLE ViaPinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

openRecordRoutePinhole ENABLE/DISABLE RecordRoutePinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

sipTransportProtocol SIP ALG Profile transport protocol type.

Possible values: TCP, UDP

openRoutePinhole ENABLE/DISABLE RoutePinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

rport ENABLE/DISABLE rport.

Possible values: ENABLED, DISABLED Default value: ENABLED

Example

Set lsn sipalgprofile profile1

add lsn sipalgprofile

Add LSN SIPALG Profile.

Synopsis

add lsn sipalgprofile \[-dataSessionIdleTimeout <positive\_integer>] \[-sipSessionTimeout <positive\_integer>] \[-registrationTimeout <positive\_integer>] \[-sipsrcportrange <port\[-port]>] \[-sipdstportrange <port\[-port]>] \[-openRegisterPinhole \( ENABLED | DISABLED )] \[-openContactPinhole \( ENABLED | DISABLED )] \[-openViaPinhole \( ENABLED | DISABLED )] \[-openRecordRoutePinhole \( ENABLED | DISABLED )] -sipTransportProtocol \( TCP | UDP ) \[-openRoutePinhole \( ENABLED | DISABLED )] \[-rport \( ENABLED | DISABLED )]

Arguments

sipalgprofilename The name of the SIPALG Profile.

dataSessionIdleTimeout Idle timeout for the data channel sessions in seconds. Default value: 120 Minimum value: 0

sipSessionTimeout SIP control channel session timeout in seconds. Default value: 600 Minimum value: 0

registrationTimeout SIP registration timeout in seconds. Default value: 60 Minimum value: 0

sipsrcportrange Source port range for SIP_UDP and SIP_TCP.

sipdstportrange Destination port range for SIP_UDP and SIP_TCP.

openRegisterPinhole ENABLE/DISABLE RegisterPinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

openContactPinhole ENABLE/DISABLE ContactPinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

openViaPinhole ENABLE/DISABLE ViaPinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

openRecordRoutePinhole ENABLE/DISABLE RecordRoutePinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

sipTransportProtocol SIP ALG Profile transport protocol type.

Possible values: TCP, UDP

openRoutePinhole ENABLE/DISABLE RoutePinhole creation.

Possible values: ENABLED, DISABLED Default value: ENABLED

rport ENABLE/DISABLE rport.

Possible values: ENABLED, DISABLED Default value: ENABLED

Example

add lsn sipalgprofile profile1

unset lsn sipalgprofile

Use this command to remove lsn sipalgprofile settings.Refer to the set lsn sipalgprofile command for meanings of the arguments.

Synopsis

unset lsn sipalgprofile [-dataSessionIdleTimeout] [-sipSessionTimeout] [-registrationTimeout] [-sipsrcportrange] [-sipdstportrange] [-openRegisterPinhole] [-openContactPinhole] [-openViaPinhole] [-openRecordRoutePinhole] [-sipTransportProtocol] [-openRoutePinhole] [-rport]

rm lsn sipalgprofile

Remove LSN SIPALG Profile.

Synopsis

rm lsn sipalgprofile

Arguments

sipalgprofilename The name of the SIPALG Profile.

Example

rm lsn sipalgprofile profile1

show lsn sipalgprofile

Display LSN SIPALG Profile.

Synopsis

show lsn sipalgprofile []

Arguments

sipalgprofilename The name of the SIPALG Profile.

Output

dataSessionIdleTimeout Idle timeout for the data channel sessions in seconds.

sipSessionTimeout SIP control channel session timeout in seconds.

registrationTimeout SIP registration timeout in seconds.

sipsrcportrange Source port range for SIP_UDP and SIP_TCP.

sipdstportrange Destination port range for SIP_UDP and SIP_TCP.

openRegisterPinhole ENABLE/DISABLE RegisterPinhole creation.

openContactPinhole ENABLE/DISABLE ContactPinhole creation.

openViaPinhole ENABLE/DISABLE ViaPinhole creation.

openRecordRoutePinhole ENABLE/DISABLE RecordRoutePinhole creation.

sipTransportProtocol SIP ALG Profile transport protocol type.

openRoutePinhole ENABLE/DISABLE RoutePinhole creation.

rport ENABLE/DISABLE rport.

devno count stateflag

Example

show lsn sipalgprofile profile1

The official version of this content is in English. Some of the Cloud Software Group documentation content is machine translated for your convenience only. Cloud Software Group has no control over machine-translated content, which may contain errors, inaccuracies or unsuitable language. No warranty of any kind, either expressed or implied, is made as to the accuracy, reliability, suitability, or correctness of any translations made from the English original into any other language, or that your Cloud Software Group product or service conforms to any machine translated content, and any warranty provided under the applicable end user license agreement or terms of service, or any other agreement with Cloud Software Group, that the product or service conforms with any documentation shall not apply to the extent that such documentation has been machine translated. Cloud Software Group will not be held responsible for any damage or issues that may arise from using machine-translated content.

Was this helpful

lsn-sipalgprofile

June 28, 2023

Contributed by:

June 28, 2023

Contributed by:

lsn-sipalgprofile

set lsn sipalgprofile

Synopsis

Arguments

Example

add lsn sipalgprofile

Synopsis

Arguments

Example

unset lsn sipalgprofile

Synopsis

rm lsn sipalgprofile

Synopsis

Arguments

Example

show lsn sipalgprofile

Synopsis

Arguments

Output

Example

In this article