ADC CLI Commands

ipTunnel

The following operations can be performed on “ipTunnel”:

rm add show

rm ipTunnel

Removes an IP tunnel configuration from the Citrix ADC.

Synopsis

rm ipTunnel

Arguments

name Name of the IP Tunnel.

Example

rm iptunnel tunnel1

add ipTunnel

Creates an IPv4 tunnel. An IP tunnel is a communication channel, using encapsulation technologies, between two networks that do not have a routing path. Every IP packet that is shared between the two networks is encapsulated within another packet and then sent through the tunnel.

Synopsis

add ipTunnel [-protocol [-vlan ]] [-grepayload ] [-ipsecProfileName ] [-ownerGroup ]

Arguments

name Name for the IP tunnel. Leading character must be a number or letter. Other characters allowed, after the first character, are @ _ - . (period) : (colon) # and space ( ).

remote Public IPv4 address, of the remote device, used to set up the tunnel. For this parameter, you can alternatively specify a network address.

remoteSubnetMask Subnet mask of the remote IP address of the tunnel.

local Type of Citrix ADC owned public IPv4 address, configured on the local Citrix ADC and used to set up the tunnel.

protocol Name of the protocol to be used on this tunnel.

Possible values: IPIP, GRE, IPSEC, UDP Default value: IPIP

grepayload The payload GRE will carry

Possible values: ETHERNETwithDOT1Q, ETHERNET, IP Default value: ETHERNETwithDOT1Q

ipsecProfileName Name of IPSec profile to be associated. Default value: “ns_ipsec_default_profile”

vlan The vlan for mulicast packets Minimum value: 1 Maximum value: 4094

ownerGroup The owner node group in a Cluster for the iptunnel. Default value: DEFAULT_NG

Example

add iptunnel tunnel1 10.100.20.0 255.255.255.0 *

show ipTunnel

Display the configured IP tunnels.

Synopsis

show ipTunnel [( ) | ]

Arguments

remote Public IPv4 address, of the remote device, used to set up the tunnel. For this parameter, you can alternatively specify a network address.

remoteSubnetMask Subnet mask of the remote IP address of the tunnel.

name Name for the IP tunnel. Leading character must be a number or letter. Other characters allowed, after the first character, are @ _ - . (period) : (colon) # and space ( ).

Output

name The name of the ip tunnel.

local Type of Citrix ADC owned public IPv4 address, configured on the local Citrix ADC and used to set up the tunnel.

protocol Name of the protocol to be used on this tunnel.

grepayload The payload GRE will carry

type The type of this tunnel.

encapIp The effective local IP address of the tunnel. Used as the source of the encapsulated packets.

channel The tunnel that is bound to a netbridge.

ipsecProfileName Name of IPSec profile to be associated.

vlan The vlan for mulicast packets

tunnelType Indicates that a tunnel is User-Configured, Internal or DELETE-IN-PROGRESS.

ipsecTunnelStatus Whether the ipsec on this tunnel is up or down.

ownerGroup The owner node group in a Cluster for the iptunnel.

refcnt Number of PBRs to bound to this iptunnel

devno count stateflag

Example

1) Name………: t1 Remote…….: 10.102.33.0 Mask……: 255.255.255.0 Local……..: * Encap…..: 0.0.0.0 Protocol…..: IPIP Type……: C

2) Name………: tunnel1 Remote…….: 10.100.20.0 Mask……: 255.255.255.0 Local……..: * Encap…..: 0.0.0.0 Protocol…..: IPIP Type……: C

3) Name………: Remote…….: 10.102.33.190 Mask……: 255.255.255.255 Local……..: * Encap…..: 10.102.33.85 Protocol…..: IPIP Type……: I

ipTunnel