ADC CLI Commands

subscriber-param

The following operations can be performed on “subscriber-param”:

show set unset

show subscriber param

displays global subscriber params.

Synopsis

show subscriber param

Arguments

Output

keytype Type of subscriber key type IP or IPANDVLAN. IPANDVLAN option can be used only when the interfaceType is set to gxOnly. Changing the lookup method should result to the subscriber session database being flushed.

interfaceType Subscriber Interface refers to Citrix ADC interaction with control plane protocols, RADIUS and GX. Types of subscriber interface: NONE, RadiusOnly, RadiusAndGx, GxOnly. NONE: Only static subscribers can be configured. RadiusOnly: GX interface is absent. Subscriber information is obtained through RADIUS Accounting messages. RadiusAndGx: Subscriber ID obtained through RADIUS Accounting is used to query PCRF. Subscriber information is obtained from both RADIUS and PCRF. GxOnly: RADIUS interface is absent. Subscriber information is queried using Subscriber IP or IP+VLAN.

idleTTL q!Idle Timeout, in seconds, after which Citrix ADC will take an idleAction on a subscriber session (refer to ‘idleAction’ arguement in ‘set subscriber param’ for more details on idleAction). Any data-plane or control plane activity updates the idleTimeout on subscriber session. idleAction could be to ‘just delete the session’ or ‘delete and CCR-T’ (if PCRF is configured) or ‘do not delete but send a CCR-U’. Zero value disables the idle timeout. !

idleAction q!Once idleTTL exprires on a subscriber session, Citrix ADC will take an idle action on that session. idleAction could be chosen from one of these ==>

  1. ccrTerminate: (default) send CCR-T to inform PCRF about session termination and delete the session.
  2. delete: Just delete the subscriber session without informing PCRF.
  3. ccrUpdate: Do not delete the session and instead send a CCR-U to PCRF requesting for an updated session. !

ipv6PrefixLookupList The ipv6PrefixLookupList should consist of all the ipv6 prefix lengths assigned to the UE’s’

builtin feature The feature to be checked while applying this config

set subscriber param

Modifies the subscriber params.

Synopsis

set subscriber param [-keytype ( IP IPANDVLAN )] [-interfaceType ] [-idleTTL ] [-idleAction ] [-ipv6PrefixLookupList ...]

Arguments

keytype Type of subscriber key type IP or IPANDVLAN. IPANDVLAN option can be used only when the interfaceType is set to gxOnly. Changing the lookup method should result to the subscriber session database being flushed.

Possible values: IP, IPANDVLAN Default value: IP

interfaceType Subscriber Interface refers to Citrix ADC interaction with control plane protocols, RADIUS and GX. Types of subscriber interface: NONE, RadiusOnly, RadiusAndGx, GxOnly. NONE: Only static subscribers can be configured. RadiusOnly: GX interface is absent. Subscriber information is obtained through RADIUS Accounting messages. RadiusAndGx: Subscriber ID obtained through RADIUS Accounting is used to query PCRF. Subscriber information is obtained from both RADIUS and PCRF. GxOnly: RADIUS interface is absent. Subscriber information is queried using Subscriber IP or IP+VLAN.

Possible values: None, RadiusOnly, RadiusAndGx, GxOnly Default value: None

idleTTL q!Idle Timeout, in seconds, after which Citrix ADC will take an idleAction on a subscriber session (refer to ‘idleAction’ arguement in ‘set subscriber param’ for more details on idleAction). Any data-plane or control plane activity updates the idleTimeout on subscriber session. idleAction could be to ‘just delete the session’ or ‘delete and CCR-T’ (if PCRF is configured) or ‘do not delete but send a CCR-U’. Zero value disables the idle timeout. ! Default value: 0 Minimum value: 0 Maximum value: 172800

idleAction q!Once idleTTL exprires on a subscriber session, Citrix ADC will take an idle action on that session. idleAction could be chosen from one of these ==>

  1. ccrTerminate: (default) send CCR-T to inform PCRF about session termination and delete the session.
  2. delete: Just delete the subscriber session without informing PCRF.
  3. ccrUpdate: Do not delete the session and instead send a CCR-U to PCRF requesting for an updated session. !

Possible values: ccrTerminate, delete, ccrUpdate Default value: ccrTerminate

ipv6PrefixLookupList The ipv6PrefixLookupList should consist of all the ipv6 prefix lengths assigned to the UE’s’ Minimum value: 1 Maximum value: 128

unset subscriber param

Use this command to remove subscriber param settings.Refer to the set subscriber param command for meanings of the arguments.

Synopsis

unset subscriber param [-keytype] [-interfaceType] [-idleTTL] [-idleAction]

subscriber-param