ADC CLI Commands

traceroute

The following operations can be performed on “traceroute”:

traceroute

Invokes the UNIX traceroute command. This command attempts to track the route that the packets follow to reach the destination host.

Synopsis

traceroute [-S] [-n] [-r] [-v] [-M <min_ttl] [-m ] [-P ][-p ] [-q ] [-s ] [-T <td>] [-t ] [-w ] []

Arguments

S Print a summary of how many probes were not answered for each hop.

n Print hop addresses numerically instead of symbolically and numerically.

r Bypass normal routing tables and send directly to a host on an attached network. If the host is not on a directly attached network, an error is returned.

v Verbose output. List received ICMP packets other than TIME_EXCEEDED and UNREACHABLE.

M Minimum TTL value used in outgoing probe packets. Default value: 1 Minimum value: 1 Maximum value: 255

m Maximum TTL value used in outgoing probe packets. For Nitro API, default value is taken as 10. Default value: 64 Minimum value: 1 Maximum value: 255

P Send packets of specified IP protocol. The currently supported protocols are UDP and ICMP.

p Base port number used in probes. Default value: 33434 Minimum value: 1 Maximum value: 65535

q Number of queries per hop. For Nitro API, defalut value is taken as 1. Default value: 3 Minimum value: 1 Maximum value: 65535

s Source IP address to use in the outgoing query packets. If the IP address does not belong to this appliance, an error is returned and nothing is sent.

T Traffic Domain Id Minimum value: 1 Maximum value: 4094

t Type-of-service in query packets. Maximum value: 255

w Time (in seconds) to wait for a response to a query. For Nitro API, defalut value is set to 3. Default value: 5 Minimum value: 2 Maximum value: 86399

host Destination host IP address or name.

packetlen Length (in bytes) of the query packets. Default value: 44 Minimum value: 44 Maximum value: 32768

Output

response

Example

traceroute 10.102.4.107

traceroute