Skip to content

lsn-client

The following operations can be performed on "lsn-client":

add| unbind| show| bind| rm|

add lsn client

Add LSN Client.

Synopsis

add lsn client

Arguments

clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

Example

add lsn client client1

unbind lsn client

Unbind LSN Client with client network or host.

Synopsis

unbind lsn client ((-network [-netmask ] [-td ]) | -aclname | -network6 | -acl6name )

Arguments

clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

network IPv4 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.

netmask Subnet mask for the IPv4 address specified in the Network parameter. Default value: 0xFFFFFFFF

aclname Name(s) of any configured extended ACL(s) whose action is ALLOW. The condition specified in the extended ACL rule identifies the traffic from an LSN subscriber for which the Citrix ADC is to perform large scale NAT.

acl6name Name of any configured extended ACL6 whose action is ALLOW. The condition specified in the extended ACL6 rule is used as the condition for the LSN client.

network6 IPv6 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.

td ID of the traffic domain on which this subscriber or the subscriber network (as specified by the network parameter) belongs. If you do not specify an ID, the subscriber or the subscriber network becomes part of the default traffic domain. Default value: 0 Minimum value: 0 Maximum value: 4094

Example

unbind lsn client client1 -network 1.1.1.0 -netmask 255.255.255.0 -td 0

show lsn client

Display LSN Client.

Synopsis

show lsn client []

Arguments

clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

Output

network IPv4 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.

netmask Subnet mask for the IPv4 address specified in the Network parameter.

td ID of the traffic domain on which this subscriber or the subscriber network (as specified by the network parameter) belongs. If you do not specify an ID, the subscriber or the subscriber network becomes part of the default traffic domain.

aclname Name(s) of any configured extended ACL(s) whose action is ALLOW. The condition specified in the extended ACL rule identifies the traffic from an LSN subscriber for which the Citrix ADC is to perform large scale NAT.

acl6name Name of any configured extended ACL6 whose action is ALLOW. The condition specified in the extended ACL6 rule is used as the condition for the LSN client.

network6 IPv6 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.

clientType This field stores the type of lsn client. Initially it will be UNSET. Once network/acl is bound, appropriate type will be decided. Primarily useful in DB validation case.

devno count stateflag

Example

show lsn client client1

bind lsn client

Bind LSN Client with client network or host. There can be a maximum of 1 million LSN subscribers globally.

Synopsis

bind lsn client ((-network [-netmask ] [-td ]) | -aclname | -network6 | -acl6name )

Arguments

clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

network IPv4 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.

netmask Subnet mask for the IPv4 address specified in the Network parameter. Default value: 0xFFFFFFFF

aclname Name(s) of any configured extended ACL(s) whose action is ALLOW. The condition specified in the extended ACL rule identifies the traffic from an LSN subscriber for which the Citrix ADC is to perform large scale NAT.

acl6name Name of any configured extended ACL6 whose action is ALLOW. The condition specified in the extended ACL6 rule is used as the condition for the LSN client.

network6 IPv6 address(es) of the LSN subscriber(s) or subscriber network(s) on whose traffic you want the Citrix ADC to perform Large Scale NAT.

td ID of the traffic domain on which this subscriber or the subscriber network (as specified by the network parameter) belongs. If you do not specify an ID, the subscriber or the subscriber network becomes part of the default traffic domain. Default value: 0 Minimum value: 0 Maximum value: 4094

Example

bind lsn client client1 -network 1.1.1.0 -netmask 255.255.255.0 -td 0

rm lsn client

Remove LSN Client.

Synopsis

rm lsn client

Arguments

clientname Name for the LSN client entity. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the LSN client is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "lsn client1" or 'lsn client1').

Example

rm lsn client client1

Was this article helpful?