Skip to content

bridgetable

The following operations can be performed on "bridgetable":

add| rm| set| unset| show| clear

add bridgetable

p{white-space: pre-wrap;}

Add static mac-vtep mappings per vxlan

Synopsys

add bridgetable -mac <mac_addr> -vxlan <positive_integer> -vtep <ip_addr> [-vni <positive_integer>] [-deviceVlan <positive_integer>]

Arguments

mac

The MAC address of the target.

vxlan

The VXLAN to which this address is associated.

Minimum value: 1

Maximum value: 16777215

vtep

The IP address of the destination VXLAN tunnel endpoint where the Ethernet MAC ADDRESS resides.

vni

The VXLAN VNI Network Identifier (or VXLAN Segment ID) to use to connect to the remote VXLAN tunnel endpoint. If omitted the value specified as vxlan will be used.

Minimum value: 1

Maximum value: 16777215

deviceVlan

The vlan on which to send multicast packets when the VXLAN tunnel endpoint is a muticast group address.

Minimum value: 1

Maximum value: 4094

Example

add bridgetable -mac 52:f2:46:e6:ed:67 -vxlan 100 -vtep 172.16.1.24 add bridgetable -mac c2:76:29:4a:fe:9e -vxlan 100 -vtep 192.168.7.1 -vni 200 add bridgetable -mac 00:00:00:00:00:00 -vxlan 100 -vtep 172.16.1.24 add bridgetable -mac 00:00:00:00:00:00 -vxlan 100 -vtep 239.0.0.1 -deviceVlan 23 add bridgetable -mac 00:00:00:00:00:00 -vxlan 100 -vtep 239.0.0.1 -deviceVlan 24

rm bridgetable

p{white-space: pre-wrap;}

Delete static mac-vtep mapping

Synopsys

rm bridgetable -mac <mac_addr> -vxlan <positive_integer> [-vtep <ip_addr>] [-deviceVlan <positive_integer>]

Arguments

mac

The MAC address of the target.

vxlan

The VXLAN to which this address is associated.

Minimum value: 1

Maximum value: 16777215

vtep

The IP address of the destination VXLAN tunnel endpoint where the Ethernet MAC ADDRESS resides.

deviceVlan

The vlan on which to send multicast packets when the VXLAN tunnel endpoint is a muticast group address.

Minimum value: 1

Maximum value: 4094

Example

rm bridgetable -mac 52:f2:46:e6:ed:67 -vxlan 100 rm bridgetable -mac 00:00:00:00:00:00 -vxlan 100 -vtep 172.16.1.24 rm bridgetable -mac 00:00:00:00:00:00 -vxlan 100 -vtep 239.0.0.1 -deviceVlan 23

set bridgetable

p{white-space: pre-wrap;}

Sets global parameters of bridge table entries. The bridgeAge attribute is deprecated. Use "set l2param -bridgeAgeTimeout" instead.

Synopsys

set bridgetable

Example

set bridgetable -bridgeAge 200

unset bridgetable

p{white-space: pre-wrap;}

Use this command to remove bridgetable settings.Refer to the set bridgetable command for meanings of the arguments.

Synopsys

unset bridgetable

show bridgetable

p{white-space: pre-wrap;}

Displays the bridge table entries and the configured time-out values for these entries.

Synopsys

show bridgetable

Outputs

bridgeAge

Time-out value for the bridge table entries, in seconds. The new value applies only to the entries that are dynamically learned after the new value is set. Previously existing bridge table entries expire after the previously configured time-out value.

mac

The MAC address of the target.

ifnum

The interface on which the address was learned.

vlan

The VLAN in which this MAC address resides.

vxlan

The VXLAN in which this MAC address resides.

vtep

The IP address of the destination VXLAN tunnel endpoint where the Ethernet MAC ADDRESS resides.

vni

The VXLAN VNI Network Identifier (or VXLAN Segment ID) to use to connect to the remote VXLAN tunnel endpoint. If omitted the value specified as vxlan will be used.

deviceVlan

The vlan on which to send multicast packets when the VXLAN tunnel endpoint is a muticast group address.

flags

Display flags,

type

Whether static or dynamic

channel

The Tunnel through which bridge entry is learned.

controlPlane

This bridge table entry is populated by a control plane protocol

devno

count

stateflag

Example

show bridgetable

clear bridgetable

p{white-space: pre-wrap;}

Remove entries from bridge table

Synopsys

clear bridgetable [-vlan <positive_integer> | -vxlan <positive_integer>] [-ifnum <interface_name>]

Arguments

vlan

VLAN whose entries are to be removed.

Minimum value: 1

Maximum value: 4094

ifnum

INTERFACE whose entries are to be removed.

vxlan

VXLAN whose entries are to be removed.

Minimum value: 1

Maximum value: 16777215