Skip to content

lacp

The following operations can be performed on "lacp":

set| show

set lacp

p{white-space: pre-wrap;}

Sets the Link Aggregation Control Protocol (LACP) system priority. Note: The Citrix ADC automatically adds a parameter called mac in the configuration file (ns.conf) for this command entry. This parameter is set to the MAC address of one of the Citrix ADC appliance's interfaces and is used along with the system priority to form the system ID for the LACP channel.

Synopsys

set lacp -sysPriority <positive_integer> [-ownerNode <positive_integer>]

Arguments

sysPriority

Priority number that determines which peer device of an LACP LA channel can have control over the LA channel. This parameter is globally applied to all LACP channels on the Citrix ADC. The lower the number, the higher the priority.

Default value: 32768

Minimum value: 1

Maximum value: 65535

ownerNode

The owner node in a cluster for which we want to set the lacp priority. Owner node can vary from 0 to 31. Ownernode value of 254 is used for Cluster.

Default value: 255

Minimum value: 0

show lacp

p{white-space: pre-wrap;}

Displays the settings of all channels created by the link aggregation control protocol (LACP) on the Citrix ADC.

Synopsys

show lacp [-ownerNode <positive_integer>]

Arguments

ownerNode

The owner node in a cluster for which we want to set the lacp priority. Owner node can vary from 0 to 31. Ownernode value of 254 is used for Cluster.

Default value: 255

Minimum value: 0

Outputs

deviceName

Name of the channel.

sysPriority

Priority number that determines which peer device of an LACP LA channel can have control over the LA channel. This parameter is globally applied to all LACP channels on the Citrix ADC. The lower the number, the higher the priority.

mac

LACP system MAC.

flags

Flags of this channel.

lacpKey

LACP key of this channel.

clustersysPriority

LACP system (Cluster) priority

clusterMac

LACP system (Cluster) mac.

devno

count

stateflag