Skip to content

MapBmr

The following operations can be performed on "MapBmr":

add| rm| bind| unbind| show| stat

add MapBmr

p{white-space: pre-wrap;}

Add MAP-T Basic Mapping rule.

Synopsys

add MapBmr <name> -RuleIpv6Prefix <ipv6_addr|*> [-psidoffset <positive_integer>] [-EAbitLength <positive_integer>] [-psidlength <positive_integer>]

Arguments

name

Name for the Basic Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Basic Mapping Rule is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapBmr bmr1 -natprefix 2005::/64 -EAbitLength 16 -psidoffset 6 -portsharingratio 8" ).

The Basic Mapping Rule information allows a MAP BR to determine source IPv4 address from the IPv6 packet sent from MAP CE device.

Also it allows to determine destination IPv6 address of MAP CE before sending packets to MAP CE

RuleIpv6Prefix

IPv6 prefix of Customer Edge(CE) device.MAP-T CE will send ipv6 packets with this ipv6 prefix as source ipv6 address prefix

psidoffset

Start bit position of Port Set Identifier(PSID) value in Embedded Address (EA) bits.

Default value: 6

Minimum value: 1

Maximum value: 15

EAbitLength

The Embedded Address (EA) bit field encodes the CE-specific IPv4 address and port information. The EA bit field, which is unique for a

given Rule IPv6 prefix.

Default value: 16

Minimum value: 2

Maximum value: 47

psidlength

Length of Port Set IdentifierPort Set Identifier(PSID) in Embedded Address (EA) bits

Default value: 8

Minimum value: 1

Maximum value: 16

Example

add network MapBmr bmr1 -natprefix 2005::/64 -EAbitLength 16 -psidoffset 6 -portsharingratio 8

rm MapBmr

p{white-space: pre-wrap;}

Remove MAP Basic Mapping Rule.

Synopsys

rm MapBmr <name>

Arguments

name

Name for the Basic Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Basic Mapping Rule is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapBmr bmr1 -natprefix 2005::/64 -EAbitLength 16 -psidoffset 6 -portsharingratio 8" ).

The Basic Mapping Rule information allows a MAP BR to determine source IPv4 address from the IPv6 packet sent from MAP CE device.

Also it allows to determine destination IPv6 address of MAP CE before sending packets to MAP CE

Example

rm network MapBmr bmr1

bind MapBmr

p{white-space: pre-wrap;}

Bind network to BMR rule.

Synopsys

bind MapBmr <name> (-network <ip_addr> [-netmask <netmask>])

Arguments

name

Name for the Basic Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Basic Mapping Rule is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapBmr bmr1 -natprefix 2005::/64 -EAbitLength 16 -psidoffset 6 -portsharingratio 8" ).

The Basic Mapping Rule information allows a MAP BR to determine source IPv4 address from the IPv6 packet sent from MAP CE device.

Also it allows to determine destination IPv6 address of MAP CE before sending packets to MAP CE

network

IPv4 NAT address range of Customer Edge (CE).

netmask

Subnet mask for the IPv4 address specified in the Network parameter.

Default value: 0xFFFFFFFF

Example

bind network MapBmr bmr1 -network 192.168.0.0 -netmask 255.255.255.0

unbind MapBmr

p{white-space: pre-wrap;}

unbind network from BMR rule.

Synopsys

unbind MapBmr <name> (-network <ip_addr> [-netmask <netmask>])

Arguments

name

Name for the Basic Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Basic Mapping Rule is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapBmr bmr1 -natprefix 2005::/64 -EAbitLength 16 -psidoffset 6 -portsharingratio 8" ).

The Basic Mapping Rule information allows a MAP BR to determine source IPv4 address from the IPv6 packet sent from MAP CE device.

Also it allows to determine destination IPv6 address of MAP CE before sending packets to MAP CE

network

IPv4 NAT address range of Customer Edge (CE).

netmask

Subnet mask for the IPv4 address specified in the Network parameter.

Default value: 0xFFFFFFFF

Example

unbind network MapBmr bmr1 -network 192.168.0.0 -netmask 255.255.255.0

show MapBmr

p{white-space: pre-wrap;}

Display Basic mapping rule.

Synopsys

show MapBmr [<name>]

Arguments

name

Name for the Basic Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Basic Mapping Rule is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapBmr bmr1 -natprefix 2005::/64 -EAbitLength 16 -psidoffset 6 -portsharingratio 8" ).

The Basic Mapping Rule information allows a MAP BR to determine source IPv4 address from the IPv6 packet sent from MAP CE device.

Also it allows to determine destination IPv6 address of MAP CE before sending packets to MAP CE

Outputs

RuleIpv6Prefix

IPv6 prefix of Customer Edge(CE) device.MAP-T CE will send ipv6 packets with this ipv6 prefix as source ipv6 address prefix

network

IPv4 NAT address range of Customer Edge (CE).

netmask

Subnet mask for the IPv4 address specified in the Network parameter.

EAbitLength

The Embedded Address (EA) bit field encodes the CE-specific IPv4 address and port information. The EA bit field, which is unique for a

given Rule IPv6 prefix.

psidoffset

Start bit position of Port Set Identifier(PSID) value in Embedded Address (EA) bits.

psidlength

Length of Port Set IdentifierPort Set Identifier(PSID) in Embedded Address (EA) bits

devno

count

stateflag

Example

show network MapBmr bmr1

stat MapBmr

p{white-space: pre-wrap;}

Display MAP Basic Mapping Rule statistics.

Synopsys

stat MapBmr [<name>] [-detail] [-fullValues] [-ntimes <positive_integer>] [-logFile <input_filename>] [-clearstats ( basic | full )]

Arguments

name

Basic Mapping Rule name.

detail

Specifies detailed output (including more statistics). The output can be quite voluminous. Without this argument, the output will show only a summary.

fullValues

Specifies that numbers and strings should be displayed in their full form. Without this option, long strings are shortened and large numbers are abbreviated

ntimes

The number of times, in intervals of seven seconds, the statistics should be displayed.

Default value: 1

Minimum value: 0

logFile

The name of the log file to be used as input.

clearstats

Clear the statsistics / counters

Possible values: basic, full

Outputs

count

devno

stateflag

Outputs

MAP-T BMR IPv6 Rx packets (v6rxPkts)

Total number of MAP-T BMR V6 Recieved packets.

MAP-T BMR IPv6 Tx packets (v6txPkts)

Total number of MAP-T BMR V6 Transmitted packets.

MAP-T BMR IPv4 Rx packets (v4rxPkts)

Total number of MAP-T BMR V4 Recieved packets.

MAP-T BMR IPv4 Tx packets (v4txPkts)

Total number of MAP-T BMR V4 Transmitted packets.

MAP-T BMR IPv6 TCP Rx packets (v6rxPktsTcp)

Total number of MAP-T BMR V6 TCP Recieved packets.

MAP-T BMR IPv6 TCP Tx packets (v6txPktsTcp)

Total number of MAP-T BMR V6 TCP Transmitted packets.

MAP-T BMR IPv4 TCP Rx packets (v4rxPktsTcp)

Total number of MAP-T BMR V4 TCP Recieved packets.

MAP-T BMR IPv4 TCP Tx packets (v4txBytesTcp)

Total number of MAP-T BMR V4 TCP Transmitted packets.

MAP-T BMR IPv6 UDP Rx packets (v6rxPktsUdp)

Total number of MAP-T BMR V6 UDP Recieved packets.

MAP-T BMR IPv6 UDP Tx packets (v6txPktsUdp)

Total number of MAP-T BMR V6 UDP Transmitted packets.

MAP-T BMR IPv4 UDP Rx packets (v4rxPktsUdp)

Total number of MAP-T BMR V4 UDP Recieved packets.

MAP-T BMR IPv4 UDP Tx packets (v4txBytesUdp)

Total number of MAP-T BMR V4 UDP Transmitted packets.

MAP-T BMR IPv6 ICMP Rx packets (v6rxPktsIcmp)

Total number of MAP-T BMR V6 ICMP Recieved packets.

MAP-T BMR IPv6 ICMP Tx packets (v6txPktsIcmp)

Total number of MAP-T BMR V6 ICMP Transmitted packets.

MAP-T BMR IPv4 ICMP Rx packets (v4rxPktsIcmp)

Total number of MAP-T BMR V4 ICMP Recieved packets.

MAP-T BMR IPv4 ICMP Tx packets (v4txBytesIcmp)

Total number of MAP-T BMR V4 ICMP Transmitted packets.

Example

stat mapbmr