Skip to content

subscriber-profile

The following operations can be performed on "subscriber-profile":

rm| set| add| unset| show|

rm subscriber profile

Deletes a static subscriber

Synopsis

rm subscriber profile @ []

Arguments

ip Subscriber ip address

vlan The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096

Example

rm subscriber profile 10.102.217.4

set subscriber profile

Modifies a static subscriber

Synopsis

set subscriber profile @ [] [-subscriberRules ...] [-subscriptionIdType ] [-subscriptionIdvalue ] [-servicePath ]

Arguments

ip Subscriber ip address

vlan The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096

subscriberRules Rules configured for this subscriber. This is similar to rules received from PCRF for dynamic subscriber sessions.

subscriptionIdType Subscription-Id type

Possible values: E164, IMSI, SIP_URI, NAI, PRIVATE

subscriptionIdvalue Subscription-Id value

servicePath Name of the servicepath to be taken for this subscriber.

Example

set subscriber profile 10.102.217.4 -subscriberRules rule1 rule2

add subscriber profile

Creates a static subscriber profile for mobile subscribers. When traffic passes through Citrix ADC, Citrix ADC can identify the subscribers for this traffic and Subscriber based policy expressions could be configured to enable subscriber aware traffic processing.

Synopsis

add subscriber profile @ [] [-subscriberRules ...] [-subscriptionIdType -subscriptionIdvalue ] [-servicePath ]

Arguments

ip Subscriber ip address

vlan The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096

subscriberRules Rules configured for this subscriber. This is similar to rules received from PCRF for dynamic subscriber sessions.

subscriptionIdType Subscription-Id type

Possible values: E164, IMSI, SIP_URI, NAI, PRIVATE

subscriptionIdvalue Subscription-Id value

servicePath Name of the servicepath to be taken for this subscriber.

Example

add subscriber profile 10.102.217.4 -subscriberRules rule1 rule2

unset subscriber profile

Use this command to remove subscriber profile settings.Refer to the set subscriber profile command for meanings of the arguments.

Synopsis

unset subscriber profile @ [-servicePath]

show subscriber profile

show command of a static subscriber

Synopsis

show subscriber profile [@] []

Arguments

ip Subscriber ip address

vlan The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096

Output

subscriptionIdType Subscription-Id type

subscriptionIdvalue Subscription-Id value

subscriberRules Rules configured for this subscriber. This is similar to rules received from PCRF for dynamic subscriber sessions.

stateflag Flags controlling the display.

flags Subscriber Session flags

TTL Subscriber Session TTL

avpdisplaybuffer Subscriber Attributes Display

servicePath Name of the servicepath to be taken for this subscriber.

devno count

Example

show subscriber profile 10.102.217.4

Was this article helpful?