Skip to content

callhome

The following operations can be performed on "callhome":

show| set| unset

show callhome

p{white-space: pre-wrap;}

Displays the CallHome configuration and trigger event details.

Synopsys

show callhome

Outputs

mode

CallHome mode of operation

emailAddress

Email address of the contact administrator.

hbCustomInterval

Interval (in days) between CallHome heartbeats

proxyMode

Enables or disables the proxy mode. The proxy server can be set by either specifying the IP address of the server or the name of the service representing the proxy server.

IPAddress

IP address of the proxy server.

port

HTTP port on the Proxy server. This is a mandatory parameter for both IP address and service name based configuration.

proxyAuthService

Name of the service that represents the proxy server.

sslcardfirstfailure

First occurrence SSL card failure.

sslcardlatestfailure

Latest occurrence SSL card failure.

powfirstfail

First occurrence power supply unit failure.

powlatestfailure

Latest occurrence power supply unit failure.

HDDfirstfail

First occurrence hard disk drive failure.

HDDlatestfailure

Latest occurrence hard disk drive failure.

FLASHfirstfail

First occurrence compact flash failure.

FLASHlatestfailure

Latest occurrence compact flush failure.

RLfirstHighDrop

First occurence of high rate limit drops

RLlatestHighDrop

Latest occurence of high rate limit drops

restartLatestfail

Latest occurrence warm restart failure.

memthreFirstAnomaly

First occurrence of memory anomaly.

memthreLatestAnomaly

Latest occurrence of memory anomaly.

callhomestatus

Callhome feature enabled/disable, register with upload server successful/failed

Example

show callhome Mode: Default E-mail address configured:xxx@yahoo.com Heartbeat Custom Interval(days): 20

Trigger event State First occurrence Latest occurrence ------------- ----- ---------------- ----------------- 1) Compact flash errors Enabled .. .. 2) Hard disk drive errors Enabled .. .. 3) Power supply unit failure Enabled 27 Aug 2010 18:22:47 28 Aug 2010 18:22:47
4) SSL card failure Enabled 25 Aug 2010 18:22:47 26 Aug 2010 18:22:47
5) Warm restart Enabled N/A ..

set callhome

p{white-space: pre-wrap;}

Sets CallHome parameters

Synopsys

set callhome [-mode (DEFAULT | CSP)] [-emailAddress <string>] [-proxyMode ( YES | NO )] [-IPAddress <ip_addr|ipv6_addr|> | -proxyAuthService <string>] [-port <port|>] [-hbCustomInterval <number of days>]

Arguments

mode

CallHome mode of operation

Possible values: Default, CSP

Default value: Default

emailAddress

Email address of the contact administrator.

hbCustomInterval

Interval (in days) between CallHome heartbeats

Default value: 7

Minimum value: 1

Maximum value: 30

proxyMode

Enables or disables the proxy mode. The proxy server can be set by either specifying the IP address of the server or the name of the service representing the proxy server.

Possible values: YES, NO

Default value: NO

IPAddress

IP address of the proxy server.

proxyAuthService

Name of the service that represents the proxy server.

port

HTTP port on the Proxy server. This is a mandatory parameter for both IP address and service name based configuration.

Minimum value: 1

Example

set callhome -mode default -emailAddress abc@xyz.com -proxyMode YES -proxyauthService callhome_proxy -port 80 -hbCustomInterval 6

unset callhome

p{white-space: pre-wrap;}

Use this command to remove callhome settings.Refer to the set callhome command for meanings of the arguments.

Synopsys

unset callhome [-mode] [-emailAddress] [-hbCustomInterval] [-proxyMode] [-IPAddress] [-proxyAuthService] [-port]