Developer Documentation
ADC NITRO APIs
Current Release 13.1 13

lbgroup

August 17, 2023
Contributed by: 
C

Configuration for LB group resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name <String> Read-write Name of the load balancing virtual server group.

Minimum length = 1
persistencetype <String> Read-write Type of persistence for the group. Available settings function as follows:

* SOURCEIP - Create persistence sessions based on the client IP.

* COOKIEINSERT - Create persistence sessions based on a cookie in client requests. The cookie is inserted by a Set-Cookie directive from the server, in its first response to a client.

* RULE - Create persistence sessions based on a user defined rule.

* NONE - Disable persistence for the group.

Possible values = SOURCEIP, COOKIEINSERT, RULE, NONE
persistencebackup <String> Read-write Type of backup persistence for the group.

Possible values = SOURCEIP, NONE
backuppersistencetimeout <Double> Read-write Time period, in minutes, for which backup persistence is in effect.

Default value: 2

Minimum value = 2

Maximum value = 1440
persistmask <String> Read-write Persistence mask to apply to source IPv4 addresses when creating source IP based persistence sessions.

Minimum length = 1
cookiename <String> Read-write Use this parameter to specify the cookie name for COOKIE peristence type. It specifies the name of cookie with a maximum of 32 characters. If not specified, cookie name is internally generated.
v6persistmasklen <Double> Read-write Persistence mask to apply to source IPv6 addresses when creating source IP based persistence sessions.

Default value: 128

Minimum value = 1

Maximum value = 128
cookiedomain <String> Read-write Domain attribute for the HTTP cookie.

Minimum length = 1
timeout <Double> Read-write Time period for which a persistence session is in effect.

Default value: 2

Minimum value = 0

Maximum value = 1440
rule <String> Read-write Expression, or name of a named expression, against which traffic is evaluated.



The following requirements apply only to the Citrix ADC CLI:

* If the expression includes one or more spaces, enclose the entire expression in double quotation marks.

* If the expression itself includes double quotation marks, escape the quotations by using the \ character.

* Alternatively, you can use single quotation marks to enclose the rule, in which case you do not have to escape the double quotation marks.

Default value: "None"
usevserverpersistency <String> Read-write Use this parameter to enable vserver level persistence on group members. This allows member vservers to have their own persistence, but need to be compatible with other members persistence rules. When this setting is enabled persistence sessions created by any of the members can be shared by other member vservers.

Default value: DISABLED

Possible values = ENABLED, DISABLED
mastervserver <String> Read-write When USE_VSERVER_PERSISTENCE is enabled, one can use this setting to designate a member vserver as master which is responsible to create the persistence sessions.
newname <String> Read-write New name for the load balancing virtual server group.

Minimum length = 1
td <Double> Read-only Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value = 0

Maximum value = 4094
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • UPDATE
  • UNSET
  • DELETE
  • GET (ALL)
  • GET
  • COUNT
  • RENAME

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: *

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload: 


{"lbgroup":{
<b>      "name":<String_value>,
</b>      "persistencetype":<String_value>,
      "persistencebackup":<String_value>,
      "backuppersistencetimeout":<Double_value>,
      "persistmask":<String_value>,
      "cookiename":<String_value>,
      "v6persistmasklen":<Double_value>,
      "cookiedomain":<String_value>,
      "timeout":<Double_value>,
      "rule":<String_value>,
      "usevserverpersistency":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload: 


{"lbgroup":{
<b>      "name":<String_value>,
</b>      "persistencetype":<String_value>,
      "persistencebackup":<String_value>,
      "backuppersistencetimeout":<Double_value>,
      "persistmask":<String_value>,
      "cookiename":<String_value>,
      "v6persistmasklen":<Double_value>,
      "cookiedomain":<String_value>,
      "timeout":<Double_value>,
      "rule":<String_value>,
      "usevserverpersistency":<String_value>,
      "mastervserver":<String_value>
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload: 


{"lbgroup":{
<b>      "name":<String_value>,
</b>      "persistencetype":true,
      "persistencebackup":true,
      "backuppersistencetimeout":true,
      "persistmask":true,
      "cookiename":true,
      "v6persistmasklen":true,
      "cookiedomain":true,
      "timeout":true,
      "rule":true,
      "usevserverpersistency":true,
      "mastervserver":true
}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup/ name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

rename

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? action=rename

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload: 


{"lbgroup":{
<b>      "name":<String_value>,
</b><b>      "newname":<String_value>
</b>}}

<!--NeedCopy-->

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of lbgroup resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? view=summary

Use this query-parameter to get the summary output of lbgroup resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? pagesize=#no;pageno=#no

Use this query-parameter to get the lbgroup resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 


{ "lbgroup": [ {
      "name":<String_value>,
      "persistencetype":<String_value>,
      "persistencebackup":<String_value>,
      "backuppersistencetimeout":<Double_value>,
      "persistmask":<String_value>,
      "v6persistmasklen":<Double_value>,
      "cookiename":<String_value>,
      "cookiedomain":<String_value>,
      "timeout":<Double_value>,
      "rule":<String_value>,
      "td":<Double_value>,
      "usevserverpersistency":<String_value>,
      "mastervserver":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup/ name_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/lbgroup/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/lbgroup/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of lbgroup resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 


{  "lbgroup": [ {
      "name":<String_value>,
      "persistencetype":<String_value>,
      "persistencebackup":<String_value>,
      "backuppersistencetimeout":<Double_value>,
      "persistmask":<String_value>,
      "v6persistmasklen":<Double_value>,
      "cookiename":<String_value>,
      "cookiedomain":<String_value>,
      "timeout":<Double_value>,
      "rule":<String_value>,
      "td":<Double_value>,
      "usevserverpersistency":<String_value>,
      "mastervserver":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/lbgroup? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 


{ "lbgroup": [ { "__count": "#no"} ] }

<!--NeedCopy-->
lbgroup
August 17, 2023
Contributed by: 
C
August 17, 2023
Contributed by: 
C

In this article

Site feedback | Privacy and legal terms | Cookie preferences | Consent settings | docs.cloud.com
© 1999- Cloud Software Group, Inc. All rights reserved.