ADC NITRO APIs

gslbservice

Statistics for GSLB service resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
servicename <String> Read-write Name of the GSLB service.

Minimum length = 1
clearstats <String> Read-write Clear the statsistics / counters.

Possible values = basic, full
establishedconn <Double> Read-only Number of client connections in ESTABLISHED state.
primaryipaddress <String> Read-only The IP address on which the service is running.
primaryport <Integer> Read-only The port on which the service is running.
servicetype <String> Read-only The service type of this service.Possible values are ADNS, DNS, MYSQL, RTSP, SSL_DIAMETER, ADNS_TCP, DNS_TCP, NNTP, SIP_UDP, SSL_TCP, ANY, FTP, RADIUS, SNMP, TCP, DHCPRA, HTTP, RDP, SSL, TFTP, DIAMETER, MSSQL, RPCSVR, SSL_BRIDGE, UDP
state <String> Read-only Current state of the server. There are seven possible values: UP(7), DOWN(1), UNKNOWN(2), BUSY(3), OFS(Out of Service)(4), TROFS(Transition Out of Service)(5), TROFS_DOWN(Down When going Out of Service)(8)
totalrequestbytes <Double> Read-only Total number of request bytes received on this service or virtual server.
requestbytesrate <Double> Read-only Rate (/s) counter for totalrequestbytes
totalresponsebytes <Double> Read-only Number of response bytes received by this service or virtual server.
responsebytesrate <Double> Read-only Rate (/s) counter for totalresponsebytes
curload <Double> Read-only Load on the service that is calculated from the bound load based monitor.
totalrequests <Double> Read-only Total number of requests received on this service or virtual server. (This applies to HTTP/SSL services and servers.)
requestsrate <Double> Read-only Rate (/s) counter for totalrequests
totalresponses <Double> Read-only Number of responses received on this service or virtual server. (This applies to HTTP/SSL services and servers.)
responsesrate <Double> Read-only Rate (/s) counter for totalresponses
curclntconnections <Double> Read-only Number of current client connections.
cursrvrconnections <Double> Read-only Number of current connections to the actual servers behind the virtual server.
vsvrservicehits <Double> Read-only Number of times that the service has been provided.
vsvrservicehitsrate <Double> Read-only Rate (/s) counter for vsvrservicehits

Operations

(click to see Properties )

  • GET (ALL)
  • GET

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: *

Mandatory parameters are marked in red and placeholder content is marked in green

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/stat/gslbservice

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/stat/gslbservice? args=servicename: <String_value> ,detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value>

Use this query-parameter to get gslbservice resources based on additional properties.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:


{  "gslbservice": [ {
      "servicename":<String_value>,
      "curclntconnections":<Double_value>,
      "servicetype":<String_value>,
      "establishedconn":<Double_value>,
      "totalrequests":<Double_value>,
      "responsebytesrate":<Double_value>,
      "totalresponses":<Double_value>,
      "requestbytesrate":<Double_value>,
      "cursrvrconnections":<Double_value>,
      "primaryipaddress":<String_value>,
      "responsesrate":<Double_value>,
      "curload":<Double_value>,
      "totalrequestbytes":<Double_value>,
      "state":<String_value>,
      "vsvrservicehits":<Double_value>,
      "totalresponsebytes":<Double_value>,
      "primaryport":<Integer_value>,
      "requestsrate":<Double_value>,
      "vsvrservicehitsrate":<Double_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/stat/gslbservice/ servicename_value><String>

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:


{  "gslbservice": [ {
      "servicename":<String_value>,
      "curclntconnections":<Double_value>,
      "servicetype":<String_value>,
      "establishedconn":<Double_value>,
      "totalrequests":<Double_value>,
      "responsebytesrate":<Double_value>,
      "totalresponses":<Double_value>,
      "requestbytesrate":<Double_value>,
      "cursrvrconnections":<Double_value>,
      "primaryipaddress":<String_value>,
      "responsesrate":<Double_value>,
      "curload":<Double_value>,
      "totalrequestbytes":<Double_value>,
      "state":<String_value>,
      "vsvrservicehits":<Double_value>,
      "totalresponsebytes":<Double_value>,
      "primaryport":<Integer_value>,
      "requestsrate":<Double_value>,
      "vsvrservicehitsrate":<Double_value>
}]}

<!--NeedCopy-->
gslbservice