Skip to content

authenticationazurekeyvault

Configuration for Azure Key Vault entity resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
name<String>Read-writeName for the new Azure Key Vault profile. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after an action is created.

The following requirement applies only to the Citrix ADC CLI:
If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my action" or 'my action').
Minimum length = 1
vaultname<String>Read-writeName of the Azure vault account as configured in azure portal.
Minimum length = 1
Maximum length = 63
clientid<String>Read-writeUnique identity of the relying party requesting for authentication.
Minimum length = 1
clientsecret<String>Read-writeUnique secret string to authorize relying party at authorization server.
Minimum length = 1
servicekeyname<String>Read-writeFriendly name of the Key to be used to compute signature.
Minimum length = 1
signaturealg<String>Read-writeAlgorithm to be used to sign/verify transactions.
Default value: RS256
Possible values = RS256
tokenendpoint<String>Read-writeURL endpoint on relying party to which the OAuth token is to be sent.
Minimum length = 1
pushservice<String>Read-writeName of the service used to send push notifications.
Minimum length = 1
defaultauthenticationgroup<String>Read-writeThis is the group that is added to user sessions that match current IdP policy. It can be used in policies to identify relying party trust.
refreshinterval<Double>Read-writeInterval at which access token in obtained.
Default value: 50
tenantid<String>Read-writeTenantID of the application. This is usually specific to providers such as Microsoft and usually refers to the deployment identifier.
authentication<String>Read-writeIf authentication is disabled, otp checks are not performed after azure vault keys are obtained. This is useful to distinguish whether user has registered devices. .
Default value: ENABLED
Possible values = ENABLED, DISABLED
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| DELETE| UPDATE| UNSET| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"authenticationazurekeyvault":{
<b>"name":<String_value>,
</b><b>"vaultname":<String_value>,
</b><b>"clientid":<String_value>,
</b><b>"clientsecret":<String_value>,
</b><b>"servicekeyname":<String_value>,
</b>"signaturealg":<String_value>,
"tokenendpoint":<String_value>,
"pushservice":<String_value>,
"defaultauthenticationgroup":<String_value>,
"refreshinterval":<Double_value>,
"tenantid":<String_value>,
"authentication":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault/name_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

update

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"authenticationazurekeyvault":{
<b>"name":<String_value>,
</b>"vaultname":<String_value>,
"clientid":<String_value>,
"clientsecret":<String_value>,
"servicekeyname":<String_value>,
"signaturealg":<String_value>,
"tokenendpoint":<String_value>,
"pushservice":<String_value>,
"defaultauthenticationgroup":<String_value>,
"refreshinterval":<Double_value>,
"tenantid":<String_value>,
"authentication":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

unset

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"authenticationazurekeyvault":{
<b>"name":<String_value>,
</b>"signaturealg":true,
"pushservice":true,
"defaultauthenticationgroup":true,
"refreshinterval":true,
"authentication":true
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of authenticationazurekeyvault resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault?pagesize=#no;pageno=#no

Use this query-parameter to get the authenticationazurekeyvault resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "authenticationazurekeyvault": [ {
"name":<String_value>,
"vaultname":<String_value>,
"clientid":<String_value>,
"clientsecret":<String_value>,
"servicekeyname":<String_value>,
"signaturealg":<String_value>,
"tokenendpoint":<String_value>,
"pushservice":<String_value>,
"defaultauthenticationgroup":<String_value>,
"refreshinterval":<Double_value>,
"tenantid":<String_value>,
"authentication":<String_value>
}]}

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault/name_value<String>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "authenticationazurekeyvault": [ {
"name":<String_value>,
"vaultname":<String_value>,
"clientid":<String_value>,
"clientsecret":<String_value>,
"servicekeyname":<String_value>,
"signaturealg":<String_value>,
"tokenendpoint":<String_value>,
"pushservice":<String_value>,
"defaultauthenticationgroup":<String_value>,
"refreshinterval":<Double_value>,
"tenantid":<String_value>,
"authentication":<String_value>
}]}

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationazurekeyvault?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "authenticationazurekeyvault": [ { "__count": "#no"} ] }