Skip to content

authenticationoauthaction

Configuration for OAuth authentication action resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
name<String>Read-writeName for the OAuth Authentication action.
Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the profile is created.

The following requirement applies only to the Citrix ADC CLI:
If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my authentication action" or 'my authentication action').
Minimum length = 1
oauthtype<String>Read-writeType of the OAuth implementation. Default value is generic implementation that is applicable for most deployments.
Default value: GENERIC
Possible values = GENERIC, INTUNE, ATHENA
authorizationendpoint<String>Read-writeAuthorization endpoint/url to which unauthenticated user will be redirected. Citrix ADC redirects user to this endpoint by adding query parameters including clientid. If this parameter not specified then as default value we take Token Endpoint/URL value. Please note that Authorization Endpoint or Token Endpoint is mandatory for oauthAction.
tokenendpoint<String>Read-writeURL to which OAuth token will be posted to verify its authenticity. User obtains this token from Authorization server upon successful authentication. Citrix ADC will validate presented token by posting it to the URL configured.
idtokendecryptendpoint<String>Read-writeURL to which obtained idtoken will be posted to get a decrypted user identity. Encrypted idtoken will be obtained by posting OAuth token to token endpoint. In order to decrypt idtoken, Citrix ADC posts request to the URL configured.
clientid<String>Read-writeUnique identity of the client/user who is getting authenticated. Authorization server infers client configuration using this ID.
Minimum length = 1
clientsecret<String>Read-writeSecret string established by user and authorization server.
Minimum length = 1
defaultauthenticationgroup<String>Read-writeThis is the default group that is chosen when the authentication succeeds in addition to extracted groups.
attribute1<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute1.
attribute2<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute2.
attribute3<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute3.
attribute4<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute4.
attribute5<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute5.
attribute6<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute6.
attribute7<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute7.
attribute8<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute8.
attribute9<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute9.
attribute10<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute10.
attribute11<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute11.
attribute12<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute12.
attribute13<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute13.
attribute14<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute14.
attribute15<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute15.
attribute16<String>Read-writeName of the attribute to be extracted from OAuth Token and to be stored in the attribute16.
tenantid<String>Read-writeTenantID of the application. This is usually specific to providers such as Microsoft and usually refers to the deployment identifier.
graphendpoint<String>Read-writeURL of the Graph API service to learn Enterprise Mobility Services (EMS) endpoints.
refreshinterval<Double>Read-writeInterval at which services are monitored for necessary configuration.
Default value: 1440
certendpoint<String>Read-writeURL of the endpoint that contains JWKs (Json Web Key) for JWT (Json Web Token) verification.
audience<String>Read-writeAudience for which token sent by Authorization server is applicable. This is typically entity name or url that represents the recipient.
usernamefield<String>Read-writeAttribute in the token from which username should be extracted.
Minimum length = 1
skewtime<Double>Read-writeThis option specifies the allowed clock skew in number of minutes that Citrix ADC allows on an incoming token. For example, if skewTime is 10, then token would be valid from (current time - 10) min to (current time + 10) min, ie 20min in all.
Default value: 5
issuer<String>Read-writeIdentity of the server whose tokens are to be accepted.
userinfourl<String>Read-writeURL to which OAuth access token will be posted to obtain user information.
certfilepath<String>Read-writePath to the file that contains JWKs (Json Web Key) for JWT (Json Web Token) verification.
granttype<String>Read-writeGrant type support. value can be code or password.
Default value: CODE
Possible values = CODE, PASSWORD
authentication<String>Read-writeIf authentication is disabled, password is not sent in the request. .
Default value: ENABLED
Possible values = ENABLED, DISABLED
oauthstatus<String>Read-onlyDescribes status information of oauth server.
Default value: INIT
Possible values = INIT, CERTFETCH, AADFORGRAPH, GRAPH, AADFORMDM, MDMINFO, COMPLETE
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| DELETE| UPDATE| UNSET| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"authenticationoauthaction":{
<b>"name":<String_value>,
</b>"oauthtype":<String_value>,
"authorizationendpoint":<String_value>,
"tokenendpoint":<String_value>,
"idtokendecryptendpoint":<String_value>,
<b>"clientid":<String_value>,
</b><b>"clientsecret":<String_value>,
</b>"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"tenantid":<String_value>,
"graphendpoint":<String_value>,
"refreshinterval":<Double_value>,
"certendpoint":<String_value>,
"audience":<String_value>,
"usernamefield":<String_value>,
"skewtime":<Double_value>,
"issuer":<String_value>,
"userinfourl":<String_value>,
"certfilepath":<String_value>,
"granttype":<String_value>,
"authentication":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction/name_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

update

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"authenticationoauthaction":{
<b>"name":<String_value>,
</b>"oauthtype":<String_value>,
"authorizationendpoint":<String_value>,
"tokenendpoint":<String_value>,
"idtokendecryptendpoint":<String_value>,
"clientid":<String_value>,
"clientsecret":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"tenantid":<String_value>,
"graphendpoint":<String_value>,
"refreshinterval":<Double_value>,
"certendpoint":<String_value>,
"audience":<String_value>,
"usernamefield":<String_value>,
"skewtime":<Double_value>,
"issuer":<String_value>,
"userinfourl":<String_value>,
"certfilepath":<String_value>,
"granttype":<String_value>,
"authentication":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

unset

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"authenticationoauthaction":{
<b>"name":<String_value>,
</b>"oauthtype":true,
"idtokendecryptendpoint":true,
"defaultauthenticationgroup":true,
"attribute1":true,
"attribute2":true,
"attribute3":true,
"attribute4":true,
"attribute5":true,
"attribute6":true,
"attribute7":true,
"attribute8":true,
"attribute9":true,
"attribute10":true,
"attribute11":true,
"attribute12":true,
"attribute13":true,
"attribute14":true,
"attribute15":true,
"attribute16":true,
"graphendpoint":true,
"refreshinterval":true,
"certendpoint":true,
"audience":true,
"usernamefield":true,
"skewtime":true,
"issuer":true,
"userinfourl":true,
"certfilepath":true,
"authentication":true
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of authenticationoauthaction resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction?pagesize=#no;pageno=#no

Use this query-parameter to get the authenticationoauthaction resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "authenticationoauthaction": [ {
"name":<String_value>,
"authorizationendpoint":<String_value>,
"tokenendpoint":<String_value>,
"idtokendecryptendpoint":<String_value>,
"clientid":<String_value>,
"clientsecret":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"tenantid":<String_value>,
"graphendpoint":<String_value>,
"refreshinterval":<Double_value>,
"certendpoint":<String_value>,
"oauthtype":<String_value>,
"audience":<String_value>,
"usernamefield":<String_value>,
"skewtime":<Double_value>,
"issuer":<String_value>,
"oauthstatus":<String_value>,
"userinfourl":<String_value>,
"certfilepath":<String_value>,
"granttype":<String_value>,
"authentication":<String_value>
}]}

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction/name_value<String>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "authenticationoauthaction": [ {
"name":<String_value>,
"authorizationendpoint":<String_value>,
"tokenendpoint":<String_value>,
"idtokendecryptendpoint":<String_value>,
"clientid":<String_value>,
"clientsecret":<String_value>,
"defaultauthenticationgroup":<String_value>,
"attribute1":<String_value>,
"attribute2":<String_value>,
"attribute3":<String_value>,
"attribute4":<String_value>,
"attribute5":<String_value>,
"attribute6":<String_value>,
"attribute7":<String_value>,
"attribute8":<String_value>,
"attribute9":<String_value>,
"attribute10":<String_value>,
"attribute11":<String_value>,
"attribute12":<String_value>,
"attribute13":<String_value>,
"attribute14":<String_value>,
"attribute15":<String_value>,
"attribute16":<String_value>,
"tenantid":<String_value>,
"graphendpoint":<String_value>,
"refreshinterval":<Double_value>,
"certendpoint":<String_value>,
"oauthtype":<String_value>,
"audience":<String_value>,
"usernamefield":<String_value>,
"skewtime":<Double_value>,
"issuer":<String_value>,
"oauthstatus":<String_value>,
"userinfourl":<String_value>,
"certfilepath":<String_value>,
"granttype":<String_value>,
"authentication":<String_value>
}]}

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/authenticationoauthaction?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "authenticationoauthaction": [ { "__count": "#no"} ] }