ADC NITRO APIs

location

Configuration for location resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
ipfrom <String> Read-write First IP address in the range, in dotted decimal notation.

Minimum length = 1
ipto <String> Read-write Last IP address in the range, in dotted decimal notation.

Minimum length = 1
preferredlocation <String> Read-write String of qualifiers, in dotted notation, describing the geographical location of the IP address range. Each qualifier is more specific than the one that precedes it, as in continent.country.region.city.isp.organization. For example, "NA.US.CA.San Jose.ATT.citrix".

Note: A qualifier that includes a dot (.) or space ( ) must be enclosed in double quotation marks.

Minimum length = 1
longitude <Integer> Read-write Numerical value, in degrees, specifying the longitude of the geographical location of the IP address-range.

Note: Longitude and latitude parameters are used for selecting a service with the static proximity GSLB method. If they are not specified, selection is based on the qualifiers specified for the location.

Minimum value = -180

Maximum value = 180
latitude <Integer> Read-write Numerical value, in degrees, specifying the latitude of the geographical location of the IP address-range.

Note: Longitude and latitude parameters are used for selecting a service with the static proximity GSLB method. If they are not specified, selection is based on the qualifiers specified for the location.

Minimum value = -90

Maximum value = 90
q1label <String> Read-only Least specific location qualifier.
q2label <String> Read-only Location qualifier 2.
q3label <String> Read-only Location qualifier 3.
q4label <String> Read-only Location qualifier 4.
q5label <String> Read-only Location qualifier 5.
q6label <String> Read-only Most specific location qualifier.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/location HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"location":{
<b>"ipfrom":<String_value>,
</b><b>"ipto":<String_value>,
</b><b>"preferredlocation":<String_value>,
</b>"longitude":<Integer_value>,
"latitude":<Integer_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/location/ ipfrom_value<String> Query-parameters: args= ipto:<String_value>

</b></b>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/location Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/location? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/location? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of location resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/location? view=summary

Use this query-parameter to get the summary output of location resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/location? pagesize=#no;pageno=#no

Use this query-parameter to get the location resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "location": [ {
"ipfrom":<String_value>,
"ipto":<String_value>,
"preferredlocation":<String_value>,
"q1label":<String_value>,
"q2label":<String_value>,
"q3label":<String_value>,
"q4label":<String_value>,
"q5label":<String_value>,
"q6label":<String_value>,
"longitude":<Integer_value>,
"latitude":<Integer_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/location/ ipfrom_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/location/ ipfrom_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/location/ ipfrom_value<String> ? view=summary

Use this query-parameter to get the summary output of location resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "location": [ {
"ipfrom":<String_value>,
"ipto":<String_value>,
"preferredlocation":<String_value>,
"q1label":<String_value>,
"q2label":<String_value>,
"q3label":<String_value>,
"q4label":<String_value>,
"q5label":<String_value>,
"q6label":<String_value>,
"longitude":<Integer_value>,
"latitude":<Integer_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/location? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "location": [ { "__count": "#no"} ] }

<!--NeedCopy-->
location