ADC NITRO APIs

service_lbmonitor_binding

Binding object showing the lbmonitor that can be bound to service.

Properties

(click to see Operations )

Name Data Type Permissions Description
weight <Double> Read-write Weight to assign to the monitor-service binding. When a monitor is UP, the weight assigned to its binding with the service determines how much the monitor contributes toward keeping the health of the service above the value configured for the Monitor Threshold parameter.

Minimum value = 1

Maximum value = 100
name <String> Read-write Name of the service to which to bind a monitor.

Minimum length = 1
passive <Boolean> Read-write Indicates if load monitor is passive. A passive load monitor does not remove service from LB decision when threshold is breached.
monitor_name <String> Read-write The monitor Names.
monstate <String> Read-write The configured state (enable/disable) of the monitor on this server.

Possible values = ENABLED, DISABLED
monstatcode <Integer> Read-only The code indicating the monitor response.
dup_weight <Double> Read-only The weight of the monitor.
responsetime <Double> Read-only Response time of this monitor.
totalfailedprobes <Double> Read-only The total number of failed probs.
monstatparam2 <Integer> Read-only Second parameter for use with message code.
lastresponse <String> Read-only The string form of monstatcode.
failedprobes <Double> Read-only Number of the current failed monitoring probes.
monstatparam3 <Integer> Read-only Third parameter for use with message code.
totalprobes <Double> Read-only The total number of probs sent.
monitor_state <String> Read-only The running state of the monitor on this service.

Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
dup_state <String> Read-only Added this field for getting state value from table.

Possible values = ENABLED, DISABLED
monitortotalprobes <Double> Read-only Total number of probes sent to monitor this service.
monstatparam1 <Integer> Read-only First parameter for use with message code.
monitortotalfailedprobes <Double> Read-only Total number of failed probes.
monitorcurrentfailedprobes <Double> Read-only Total number of currently failed probes.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/service_lbmonitor_binding HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"service_lbmonitor_binding":{
<b>"name":<String_value>,
</b>"monitor_name":<String_value>,
"monstate":<String_value>,
"weight":<Double_value>,
"passive":<Boolean_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/service_lbmonitor_binding/ name_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/service_lbmonitor_binding/ name_value<String> ? args=monitor_name: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/service_lbmonitor_binding/ name_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/service_lbmonitor_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of service_lbmonitor_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/service_lbmonitor_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the service_lbmonitor_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "service_lbmonitor_binding": [ {
"weight":<Double_value>,
"name":<String_value>,
"passive":<Boolean_value>,
"monitor_name":<String_value>,
"monstate":<String_value>,
"monstatcode":<Integer_value>,
"dup_weight":<Double_value>,
"responsetime":<Double_value>,
"totalfailedprobes":<Double_value>,
"monstatparam2":<Integer_value>,
"lastresponse":<String_value>,
"failedprobes":<Double_value>,
"monstatparam3":<Integer_value>,
"totalprobes":<Double_value>,
"monitor_state":<String_value>,
"dup_state":<String_value>,
"monitortotalprobes":<Double_value>,
"monstatparam1":<Integer_value>,
"monitortotalfailedprobes":<Double_value>,
"monitorcurrentfailedprobes":<Double_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/service_lbmonitor_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/service_lbmonitor_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "service_lbmonitor_binding": [ {
"weight":<Double_value>,
"name":<String_value>,
"passive":<Boolean_value>,
"monitor_name":<String_value>,
"monstate":<String_value>,
"monstatcode":<Integer_value>,
"dup_weight":<Double_value>,
"responsetime":<Double_value>,
"totalfailedprobes":<Double_value>,
"monstatparam2":<Integer_value>,
"lastresponse":<String_value>,
"failedprobes":<Double_value>,
"monstatparam3":<Integer_value>,
"totalprobes":<Double_value>,
"monitor_state":<String_value>,
"dup_state":<String_value>,
"monitortotalprobes":<Double_value>,
"monstatparam1":<Integer_value>,
"monitortotalfailedprobes":<Double_value>,
"monitorcurrentfailedprobes":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/service_lbmonitor_binding/ name_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"service_lbmonitor_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
service_lbmonitor_binding