ADC NITRO APIs

servicegroup_lbmonitor_binding

Binding object showing the lbmonitor that can be bound to servicegroup.

Properties

(click to see Operations )

Name Data Type Permissions Description
state <String> Read-write Initial state of the service after binding.

Default value: ENABLED

Possible values = ENABLED, DISABLED
order <Double> Read-write Order number to be assigned to the servicegroup member.

Minimum value = 1

Maximum value = 8192
customserverid <String> Read-write Unique service identifier. Used when the persistency type for the virtual server is set to Custom Server ID.

Default value: "None"
weight <Double> Read-write Weight to assign to the servers in the service group. Specifies the capacity of the servers relative to the other servers in the load balancing configuration. The higher the weight, the higher the percentage of requests sent to the service.

Minimum value = 1

Maximum value = 100
dbsttl <Double> Read-write Specify the TTL for DNS record for domain based service.The default value of ttl is 0 which indicates to use the TTL received in DNS response for monitors.

Default value: 0
port <Integer> Read-write Port number of the service. Each service must have a unique port number.

Range 1 - 65535

* in CLI is represented as 65535 in NITRO API
serverid <Double> Read-write The identifier for the service. This is used when the persistency type is set to Custom Server ID.
passive <Boolean> Read-write Indicates if load monitor is passive. A passive load monitor does not remove service from LB decision when threshold is breached.
nameserver <String> Read-write Specify the nameserver to which the query for bound domain needs to be sent. If not specified, use the global nameserver.
monitor_name <String> Read-write Monitor name.
monstate <String> Read-write Monitor state.

Possible values = ENABLED, DISABLED
servicegroupname <String> Read-write Name of the service group.

Minimum length = 1
hashid <Double> Read-write Unique numerical identifier used by hash based load balancing methods to identify a service.

Minimum value = 1
monweight <Double> Read-only weight of the monitor that is bound to servicegroup.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/servicegroup_lbmonitor_binding HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"servicegroup_lbmonitor_binding":{
<b>"servicegroupname":<String_value>,
</b>"port":<Integer_value>,
"monitor_name":<String_value>,
"monstate":<String_value>,
"passive":<Boolean_value>,
"weight":<Double_value>,
"customserverid":<String_value>,
"serverid":<Double_value>,
"state":<String_value>,
"hashid":<Double_value>,
"nameserver":<String_value>,
"dbsttl":<Double_value>,
"order":<Double_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/servicegroup_lbmonitor_binding/ servicegroupname_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/servicegroup_lbmonitor_binding/ servicegroupname_value<String> ? args=port: <Integer_value> ,monitor_name: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/servicegroup_lbmonitor_binding/ servicegroupname_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/servicegroup_lbmonitor_binding/ servicegroupname_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of servicegroup_lbmonitor_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/servicegroup_lbmonitor_binding/ servicegroupname_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the servicegroup_lbmonitor_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "servicegroup_lbmonitor_binding": [ {
"state":<String_value>,
"order":<Double_value>,
"customserverid":<String_value>,
"weight":<Double_value>,
"dbsttl":<Double_value>,
"port":<Integer_value>,
"serverid":<Double_value>,
"passive":<Boolean_value>,
"nameserver":<String_value>,
"monitor_name":<String_value>,
"monstate":<String_value>,
"servicegroupname":<String_value>,
"hashid":<Double_value>,
"monweight":<Double_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/servicegroup_lbmonitor_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/servicegroup_lbmonitor_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "servicegroup_lbmonitor_binding": [ {
"state":<String_value>,
"order":<Double_value>,
"customserverid":<String_value>,
"weight":<Double_value>,
"dbsttl":<Double_value>,
"port":<Integer_value>,
"serverid":<Double_value>,
"passive":<Boolean_value>,
"nameserver":<String_value>,
"monitor_name":<String_value>,
"monstate":<String_value>,
"servicegroupname":<String_value>,
"hashid":<Double_value>,
"monweight":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/servicegroup_lbmonitor_binding/ servicegroupname_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"servicegroup_lbmonitor_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
servicegroup_lbmonitor_binding