ADC NITRO APIs

botprofile_whitelist_binding

Binding object showing the whitelist that can be bound to botprofile.

Properties

(click to see Operations )

Name Data Type Permissions Description
name <String> Read-write Name for the profile. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.), pound (#), space ( ), at (@), equals (=), colon (:), and underscore (_) characters. Cannot be changed after the profile is added. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my profile" or 'my profile').

Minimum length = 1

Maximum length = 31
bot_whitelist_enabled <String> Read-write Enabled or disabled white-list binding.

Default value: OFF

Possible values = ON, OFF
bot_bind_comment <String> Read-write Any comments about this binding.

Minimum length = 1
bot_whitelist_value <String> Read-write Value of bot white-list entry.
logmessage <String> Read-write Message to be logged for this binding.

Minimum length = 1
log <String> Read-write Enable logging for Whitelist binding.

Default value: OFF

Possible values = ON, OFF
bot_whitelist_type <String> Read-write Type of the white-list entry.

Possible values = IPv4, SUBNET, IPv6, IPv6_SUBNET, EXPRESSION
bot_whitelist <Boolean> Read-write Whitelist binding. Maximum 32 bindings can be configured per profile for Whitelist detection.
__count <Double> Read-write count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/botprofile_whitelist_binding HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"botprofile_whitelist_binding":{
<b>"name":<String_value>,
</b>"bot_whitelist":<Boolean_value>,
"bot_whitelist_type":<String_value>,
"bot_whitelist_value":<String_value>,
"log":<String_value>,
"bot_whitelist_enabled":<String_value>,
"logmessage":<String_value>,
"bot_bind_comment":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile_whitelist_binding/ name_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/botprofile_whitelist_binding/ name_value<String> ? args=bot_whitelist: <Boolean_value> ,bot_whitelist_value: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile_whitelist_binding/ name_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/botprofile_whitelist_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of botprofile_whitelist_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/botprofile_whitelist_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the botprofile_whitelist_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "botprofile_whitelist_binding": [ {
"name":<String_value>,
"bot_whitelist_enabled":<String_value>,
"bot_bind_comment":<String_value>,
"bot_whitelist_value":<String_value>,
"logmessage":<String_value>,
"log":<String_value>,
"bot_whitelist_type":<String_value>,
"bot_whitelist":<Boolean_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile_whitelist_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/botprofile_whitelist_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "botprofile_whitelist_binding": [ {
"name":<String_value>,
"bot_whitelist_enabled":<String_value>,
"bot_bind_comment":<String_value>,
"bot_whitelist_value":<String_value>,
"logmessage":<String_value>,
"log":<String_value>,
"bot_whitelist_type":<String_value>,
"bot_whitelist":<Boolean_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/botprofile_whitelist_binding/ name_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"botprofile_whitelist_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
botprofile_whitelist_binding