Skip to content

cachecontentgroup

Configuration for Integrated Cache content group resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name <String> Read-write Name for the content group. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the content group is created.

Minimum length = 1
weakposrelexpiry <Double> Read-write Relative expiry time, in seconds, for expiring positive responses with response codes between 200 and 399. Cannot be used in combination with other Expiry attributes. Similar to -relExpiry but has lower precedence.

Minimum value = 0

Maximum value = 31536000
heurexpiryparam <Double> Read-write Heuristic expiry time, in percent of the duration, since the object was last modified.

Minimum value = 0

Maximum value = 100
relexpiry <Double> Read-write Relative expiry time, in seconds, after which to expire an object cached in this content group.

Minimum value = 0

Maximum value = 31536000
relexpirymillisec <Double> Read-write Relative expiry time, in milliseconds, after which to expire an object cached in this content group.

Minimum value = 0

Maximum value = 86400000
absexpiry <String[]> Read-write Local time, up to 4 times a day, at which all objects in the content group must expire.



CLI Users:

For example, to specify that the objects in the content group should expire by 11:00 PM, type the following command: add cache contentgroup <contentgroup name> -absexpiry 23:00

To specify that the objects in the content group should expire at 10:00 AM, 3 PM, 6 PM, and 11:00 PM, type: add cache contentgroup <contentgroup name> -absexpiry 10:00 15:00 18:00 23:00.
absexpirygmt <String[]> Read-write Coordinated Universal Time (GMT), up to 4 times a day, when all objects in the content group must expire.
weaknegrelexpiry <Double> Read-write Relative expiry time, in seconds, for expiring negative responses. This value is used only if the expiry time cannot be determined from any other source. It is applicable only to the following status codes: 307, 403, 404, and 410.

Minimum value = 0

Maximum value = 31536000
hitparams <String[]> Read-write Parameters to use for parameterized hit evaluation of an object. Up to 128 parameters can be specified. Mutually exclusive with the Hit Selector parameter.

Minimum length = 1
invalparams <String[]> Read-write Parameters for parameterized invalidation of an object. You can specify up to 8 parameters. Mutually exclusive with invalSelector.

Minimum length = 1
ignoreparamvaluecase <String> Read-write Ignore case when comparing parameter values during parameterized hit evaluation. (Parameter value case is ignored by default during parameterized invalidation.).

Possible values = YES, NO
matchcookies <String> Read-write Evaluate for parameters in the cookie header also.

Possible values = YES, NO
invalrestrictedtohost <String> Read-write Take the host header into account during parameterized invalidation.

Possible values = YES, NO
polleverytime <String> Read-write Always poll for the objects in this content group. That is, retrieve the objects from the origin server whenever they are requested.

Default value: NO

Possible values = YES, NO
ignorereloadreq <String> Read-write Ignore any request to reload a cached object from the origin server.

To guard against Denial of Service attacks, set this parameter to YES. For RFC-compliant behavior, set it to NO.

Default value: YES

Possible values = YES, NO
removecookies <String> Read-write Remove cookies from responses.

Default value: YES

Possible values = YES, NO
prefetch <String> Read-write Attempt to refresh objects that are about to go stale.

Default value: YES

Possible values = YES, NO
prefetchperiod <Double> Read-write Time period, in seconds before an object's calculated expiry time, during which to attempt prefetch.

Minimum value = 0

Maximum value = 4294967294
prefetchperiodmillisec <Double> Read-write Time period, in milliseconds before an object's calculated expiry time, during which to attempt prefetch.

Minimum value = 0

Maximum value = 4294967290
prefetchmaxpending <Double> Read-write Maximum number of outstanding prefetches that can be queued for the content group.

Minimum value = 0

Maximum value = 4294967294
flashcache <String> Read-write Perform flash cache. Mutually exclusive with Poll Every Time (PET) on the same content group.

Default value: NO

Possible values = YES, NO
expireatlastbyte <String> Read-write Force expiration of the content immediately after the response is downloaded (upon receipt of the last byte of the response body). Applicable only to positive responses.

Default value: NO

Possible values = YES, NO
insertvia <String> Read-write Insert a Via header into the response.

Default value: YES

Possible values = YES, NO
insertage <String> Read-write Insert an Age header into the response. An Age header contains information about the age of the object, in seconds, as calculated by the integrated cache.

Default value: YES

Possible values = YES, NO
insertetag <String> Read-write Insert an ETag header in the response. With ETag header insertion, the integrated cache does not serve full responses on repeat requests.

Default value: YES

Possible values = YES, NO
cachecontrol <String> Read-write Insert a Cache-Control header into the response.

Minimum length = 1
quickabortsize <Double> Read-write If the size of an object that is being downloaded is less than or equal to the quick abort value, and a client aborts during the download, the cache stops downloading the response. If the object is larger than the quick abort size, the cache continues to download the response.

Default value: 4194303

Minimum value = 0

Maximum value = 4194303
minressize <Double> Read-write Minimum size of a response that can be cached in this content group.

Default minimum response size is 0.

Minimum value = 0

Maximum value = 2097151
maxressize <Double> Read-write Maximum size of a response that can be cached in this content group.

Default value: 80

Minimum value = 0

Maximum value = 2097151
memlimit <Double> Read-write Maximum amount of memory that the cache can use. The effective limit is based on the available memory of the Citrix ADC.

Default value: 65536
ignorereqcachinghdrs <String> Read-write Ignore Cache-Control and Pragma headers in the incoming request.

Default value: YES

Possible values = YES, NO
minhits <Integer> Read-write Number of hits that qualifies a response for storage in this content group.

Default value: 0
alwaysevalpolicies <String> Read-write Force policy evaluation for each response arriving from the origin server. Cannot be set to YES if the Prefetch parameter is also set to YES.

Default value: NO

Possible values = YES, NO
persistha <String> Read-write Setting persistHA to YES causes IC to save objects in contentgroup to Secondary node in HA deployment.

Default value: NO

Possible values = YES, NO
pinned <String> Read-write Do not flush objects from this content group under memory pressure.

Default value: NO

Possible values = YES, NO
lazydnsresolve <String> Read-write Perform DNS resolution for responses only if the destination IP address in the request does not match the destination IP address of the cached response.

Default value: YES

Possible values = YES, NO
hitselector <String> Read-write Selector for evaluating whether an object gets stored in a particular content group. A selector is an abstraction for a collection of PIXL expressions.
invalselector <String> Read-write Selector for invalidating objects in the content group. A selector is an abstraction for a collection of PIXL expressions.
type <String> Read-write The type of the content group.

Default value: HTTP

Possible values = HTTP, MYSQL, MSSQL
query <String> Read-write Query string specifying individual objects to flush from this group by using parameterized invalidation. If this parameter is not set, all objects are flushed from the group.

Minimum length = 1
host <String> Read-write Flush only objects that belong to the specified host. Do not use except with parameterized invalidation. Also, the Invalidation Restricted to Host parameter for the group must be set to YES.

Minimum length = 1
selectorvalue <String> Read-write Value of the selector to be used for flushing objects from the content group. Requires that an invalidation selector be configured for the content group.

Minimum length = 1
tosecondary <String> Read-write content group whose objects are to be sent to secondary.

Default value: NO

Possible values = YES, NO
flags <Double> Read-only Flags.
prefetchcur <Double> Read-only Current outstanding prefetches.
memusage <Double> Read-only Current memory usage.
memdusage <Double> Read-only Current disk memory usage.
disklimit <Double> Read-only Maximum amount of disk that the cache can use. The effective limit is based on the available memory of the Citrix ADC.

Default value: 0
cachenon304hits <Double> Read-only Cache non 304 hits.
cache304hits <Double> Read-only Cache 304 hits.
cachecells <Double> Read-only Number of cells.
cachegroupincarnation <Double> Read-only Cache group incarnation.
persist <String> Read-only Setting persist to YES causes IC to save objects in contentgroup to disk.

Default value: NO

Possible values = YES, NO
policyname <String[]> Read-only Active cache policies refering to this group.
cachenuminvalpolicy <Double> Read-only Number of active Invalidation policies refering to this group.
markercells <Double> Read-only Numbers of marker cells in this group.
builtin <String[]> Read-only .

Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL
feature <String> Read-only The feature to be checked while applying this config.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • UPDATE
  • UNSET
  • GET (ALL)
  • GET
  • COUNT
  • EXPIRE
  • FLUSH
  • SAVE

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"cachecontentgroup":{
<b>      "name":<String_value>,
</b>      "weakposrelexpiry":<Double_value>,
      "heurexpiryparam":<Double_value>,
      "relexpiry":<Double_value>,
      "relexpirymillisec":<Double_value>,
      "absexpiry":<String[]_value>,
      "absexpirygmt":<String[]_value>,
      "weaknegrelexpiry":<Double_value>,
      "hitparams":<String[]_value>,
      "invalparams":<String[]_value>,
      "ignoreparamvaluecase":<String_value>,
      "matchcookies":<String_value>,
      "invalrestrictedtohost":<String_value>,
      "polleverytime":<String_value>,
      "ignorereloadreq":<String_value>,
      "removecookies":<String_value>,
      "prefetch":<String_value>,
      "prefetchperiod":<Double_value>,
      "prefetchperiodmillisec":<Double_value>,
      "prefetchmaxpending":<Double_value>,
      "flashcache":<String_value>,
      "expireatlastbyte":<String_value>,
      "insertvia":<String_value>,
      "insertage":<String_value>,
      "insertetag":<String_value>,
      "cachecontrol":<String_value>,
      "quickabortsize":<Double_value>,
      "minressize":<Double_value>,
      "maxressize":<Double_value>,
      "memlimit":<Double_value>,
      "ignorereqcachinghdrs":<String_value>,
      "minhits":<Integer_value>,
      "alwaysevalpolicies":<String_value>,
      "persistha":<String_value>,
      "pinned":<String_value>,
      "lazydnsresolve":<String_value>,
      "hitselector":<String_value>,
      "invalselector":<String_value>,
      "type":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup/ name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"cachecontentgroup":{
<b>      "name":<String_value>,
</b>      "weakposrelexpiry":<Double_value>,
      "heurexpiryparam":<Double_value>,
      "relexpiry":<Double_value>,
      "relexpirymillisec":<Double_value>,
      "absexpiry":<String[]_value>,
      "absexpirygmt":<String[]_value>,
      "weaknegrelexpiry":<Double_value>,
      "hitparams":<String[]_value>,
      "invalparams":<String[]_value>,
      "ignoreparamvaluecase":<String_value>,
      "matchcookies":<String_value>,
      "invalrestrictedtohost":<String_value>,
      "polleverytime":<String_value>,
      "ignorereloadreq":<String_value>,
      "removecookies":<String_value>,
      "prefetch":<String_value>,
      "prefetchperiod":<Double_value>,
      "prefetchperiodmillisec":<Double_value>,
      "prefetchmaxpending":<Double_value>,
      "flashcache":<String_value>,
      "expireatlastbyte":<String_value>,
      "insertvia":<String_value>,
      "insertage":<String_value>,
      "insertetag":<String_value>,
      "cachecontrol":<String_value>,
      "quickabortsize":<Double_value>,
      "minressize":<Double_value>,
      "maxressize":<Double_value>,
      "memlimit":<Double_value>,
      "ignorereqcachinghdrs":<String_value>,
      "minhits":<Integer_value>,
      "alwaysevalpolicies":<String_value>,
      "persistha":<String_value>,
      "pinned":<String_value>,
      "lazydnsresolve":<String_value>,
      "hitselector":<String_value>,
      "invalselector":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"cachecontentgroup":{
<b>      "name":<String_value>,
</b>      "weakposrelexpiry":true,
      "heurexpiryparam":true,
      "relexpiry":true,
      "relexpirymillisec":true,
      "absexpiry":true,
      "absexpirygmt":true,
      "weaknegrelexpiry":true,
      "hitparams":true,
      "invalparams":true,
      "ignoreparamvaluecase":true,
      "matchcookies":true,
      "invalrestrictedtohost":true,
      "polleverytime":true,
      "ignorereloadreq":true,
      "removecookies":true,
      "prefetch":true,
      "prefetchperiod":true,
      "prefetchperiodmillisec":true,
      "prefetchmaxpending":true,
      "flashcache":true,
      "expireatlastbyte":true,
      "insertvia":true,
      "insertage":true,
      "insertetag":true,
      "cachecontrol":true,
      "quickabortsize":true,
      "minressize":true,
      "maxressize":true,
      "memlimit":true,
      "ignorereqcachinghdrs":true,
      "minhits":true,
      "alwaysevalpolicies":true,
      "persistha":true,
      "pinned":true,
      "lazydnsresolve":true,
      "hitselector":true,
      "invalselector":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

expire

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup? action=expire

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"cachecontentgroup":{
<b>      "name":<String_value>
</b>}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

flush

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup? action=flush

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"cachecontentgroup":{
<b>      "name":<String_value>,
</b>      "query":<String_value>,
      "host":<String_value>,
      "selectorvalue":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

save

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup? action=save

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"cachecontentgroup":{
<b>      "name":<String_value>,
</b>      "tosecondary":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of cachecontentgroup resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup? view=summary

Use this query-parameter to get the summary output of cachecontentgroup resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup? pagesize=#no;pageno=#no

Use this query-parameter to get the cachecontentgroup resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "cachecontentgroup": [ {
      "name":<String_value>,
      "flags":<Double_value>,
      "type":<String_value>,
      "relexpiry":<Double_value>,
      "relexpirymillisec":<Double_value>,
      "absexpiry":<String[]_value>,
      "absexpirygmt":<String[]_value>,
      "heurexpiryparam":<Double_value>,
      "weakposrelexpiry":<Double_value>,
      "weaknegrelexpiry":<Double_value>,
      "hitparams":<String[]_value>,
      "invalparams":<String[]_value>,
      "ignoreparamvaluecase":<String_value>,
      "matchcookies":<String_value>,
      "invalrestrictedtohost":<String_value>,
      "polleverytime":<String_value>,
      "ignorereloadreq":<String_value>,
      "removecookies":<String_value>,
      "prefetch":<String_value>,
      "prefetchperiod":<Double_value>,
      "prefetchperiodmillisec":<Double_value>,
      "prefetchcur":<Double_value>,
      "prefetchmaxpending":<Double_value>,
      "flashcache":<String_value>,
      "expireatlastbyte":<String_value>,
      "insertvia":<String_value>,
      "insertage":<String_value>,
      "insertetag":<String_value>,
      "cachecontrol":<String_value>,
      "quickabortsize":<Double_value>,
      "minressize":<Double_value>,
      "maxressize":<Double_value>,
      "memusage":<Double_value>,
      "memdusage":<Double_value>,
      "disklimit":<Double_value>,
      "memlimit":<Double_value>,
      "ignorereqcachinghdrs":<String_value>,
      "cachenon304hits":<Double_value>,
      "cache304hits":<Double_value>,
      "cachecells":<Double_value>,
      "cachegroupincarnation":<Double_value>,
      "minhits":<Integer_value>,
      "alwaysevalpolicies":<String_value>,
      "persist":<String_value>,
      "persistha":<String_value>,
      "pinned":<String_value>,
      "lazydnsresolve":<String_value>,
      "hitselector":<String_value>,
      "invalselector":<String_value>,
      "policyname":<String[]_value>,
      "cachenuminvalpolicy":<Double_value>,
      "markercells":<Double_value>,
      "builtin":<String[]_value>,
      "feature":<String_value>
}]}

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup/ name_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of cachecontentgroup resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "cachecontentgroup": [ {
      "name":<String_value>,
      "flags":<Double_value>,
      "type":<String_value>,
      "relexpiry":<Double_value>,
      "relexpirymillisec":<Double_value>,
      "absexpiry":<String[]_value>,
      "absexpirygmt":<String[]_value>,
      "heurexpiryparam":<Double_value>,
      "weakposrelexpiry":<Double_value>,
      "weaknegrelexpiry":<Double_value>,
      "hitparams":<String[]_value>,
      "invalparams":<String[]_value>,
      "ignoreparamvaluecase":<String_value>,
      "matchcookies":<String_value>,
      "invalrestrictedtohost":<String_value>,
      "polleverytime":<String_value>,
      "ignorereloadreq":<String_value>,
      "removecookies":<String_value>,
      "prefetch":<String_value>,
      "prefetchperiod":<Double_value>,
      "prefetchperiodmillisec":<Double_value>,
      "prefetchcur":<Double_value>,
      "prefetchmaxpending":<Double_value>,
      "flashcache":<String_value>,
      "expireatlastbyte":<String_value>,
      "insertvia":<String_value>,
      "insertage":<String_value>,
      "insertetag":<String_value>,
      "cachecontrol":<String_value>,
      "quickabortsize":<Double_value>,
      "minressize":<Double_value>,
      "maxressize":<Double_value>,
      "memusage":<Double_value>,
      "memdusage":<Double_value>,
      "disklimit":<Double_value>,
      "memlimit":<Double_value>,
      "ignorereqcachinghdrs":<String_value>,
      "cachenon304hits":<Double_value>,
      "cache304hits":<Double_value>,
      "cachecells":<Double_value>,
      "cachegroupincarnation":<Double_value>,
      "minhits":<Integer_value>,
      "alwaysevalpolicies":<String_value>,
      "persist":<String_value>,
      "persistha":<String_value>,
      "pinned":<String_value>,
      "lazydnsresolve":<String_value>,
      "hitselector":<String_value>,
      "invalselector":<String_value>,
      "policyname":<String[]_value>,
      "cachenuminvalpolicy":<Double_value>,
      "markercells":<Double_value>,
      "builtin":<String[]_value>,
      "feature":<String_value>
}]}

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/cachecontentgroup? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "cachecontentgroup": [ { "__count": "#no"} ] }