Skip to content

contentinspectionpolicylabel

Configuration for ContentInspection policy label resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
labelname<String>Read-writeName for the contentInspection policy label. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) hash (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the contentInspection policy label is added.

The following requirement applies only to the Citrix ADC CLI:
If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my contentInspection policy label" or 'my contentInspection policy label').
type<String>Read-writeType of packets (request or response packets) against which to match the policies bound to this policy label.
Possible values = REQ, RES
comment<String>Read-writeAny comments to preserve information about this contentInspection policy label.
newname<String>Read-writeNew name for the contentInspection policy label.
Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) hash (#), space ( ), at (@), equals (=), colon (:), and underscore characters.

The following requirement applies only to the Citrix ADC CLI:
If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my policy label" or 'my policy label').
Minimum length = 1
numpol<Double>Read-onlyNumber of polices bound to label.
hits<Double>Read-onlyNumber of times policy label was invoked.
priority<Double>Read-onlySpecifies the priority of the policy.
gotopriorityexpression<String>Read-onlyExpression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE.
labeltype<String>Read-onlyType of invocation. Available settings function as follows:
* reqvserver - Forward the request to the specified request virtual server.
* resvserver - Forward the response to the specified response virtual server.
* policylabel - Invoke the specified policy label.
Possible values = reqvserver, resvserver, policylabel
invoke_labelname<String>Read-only* If labelType is policylabel, name of the policy label to invoke.
* If labelType is reqvserver or resvserver, name of the virtual server to which to forward the request or response.
flowtype<Double>Read-onlyFlowtype of the bound contentInspection policy.
isdefault<Boolean>Read-onlyA value of true is returned if it is a default cipolicylabel.
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| DELETE| RENAME| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"contentinspectionpolicylabel":{
<b>"labelname":<String_value>,
</b><b>"type":<String_value>,
</b>"comment":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel/labelname_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

rename

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel?action=rename

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"contentinspectionpolicylabel":{
<b>"labelname":<String_value>,
</b><b>"newname":<String_value>
</b>}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of contentinspectionpolicylabel resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel?pagesize=#no;pageno=#no

Use this query-parameter to get the contentinspectionpolicylabel resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "contentinspectionpolicylabel": [ {
"labelname":<String_value>,
"type":<String_value>,
"numpol":<Double_value>,
"hits":<Double_value>,
"priority":<Double_value>,
"gotopriorityexpression":<String_value>,
"labeltype":<String_value>,
"invoke_labelname":<String_value>,
"flowtype":<Double_value>,
"isdefault":<Boolean_value>,
"comment":<String_value>
}]}

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel/labelname_value<String>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel/labelname_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel/labelname_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "contentinspectionpolicylabel": [ {
"labelname":<String_value>,
"type":<String_value>,
"numpol":<Double_value>,
"hits":<Double_value>,
"priority":<Double_value>,
"gotopriorityexpression":<String_value>,
"labeltype":<String_value>,
"invoke_labelname":<String_value>,
"flowtype":<Double_value>,
"isdefault":<Boolean_value>,
"comment":<String_value>
}]}

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/contentinspectionpolicylabel?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "contentinspectionpolicylabel": [ { "__count": "#no"} ] }