ADC NITRO APIs

dnsaddrec

Configuration for address type record resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
hostname <String> Read-write Domain name.

Minimum length = 1
ipaddress <String> Read-write One or more IPv4 addresses to assign to the domain name.

Minimum length = 1
ttl <Double> Read-write Time to Live (TTL), in seconds, for the record. TTL is the time for which the record must be cached by DNS proxies. The specified TTL is applied to all the resource records that are of the same record type and belong to the specified domain name. For example, if you add an address record, with a TTL of 36000, to the domain name example.com, the TTLs of all the address records of example.com are changed to 36000. If the TTL is not specified, the Citrix ADC uses either the DNS zone's minimum TTL or, if the SOA record is not available on the appliance, the default value of 3600.

Default value: 3600

Minimum value = 0

Maximum value = 2147483647
ecssubnet <String> Read-write Subnet for which the cached address records need to be removed.
type <String> Read-write The address record type. The type can take 3 values:

ADNS - If this is specified, all of the authoritative address records will be displayed.

PROXY - If this is specified, all of the proxy address records will be displayed.

ALL - If this is specified, all of the address records will be displayed.

Possible values = ALL, ADNS, PROXY
nodeid <Double> Read-write Unique number that identifies the cluster node.

Minimum value = 0

Maximum value = 31
vservername <String> Read-only Vitual server name.
authtype <String> Read-only Authentication type.

Possible values = ALL, ADNS, PROXY
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"dnsaddrec":{
<b>"hostname":<String_value>,
</b><b>"ipaddress":<String_value>,
</b>"ttl":<Double_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec/ hostname_value<String> Query-parameters: args=ecssubnet: <String_value> ,ipaddress: <String_value>

</b>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec? args=hostname: <String_value> ,type: <String_value> ,nodeid: <Double_value>

Use this query-parameter to get dnsaddrec resources based on additional properties.

attrs http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of dnsaddrec resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec? view=summary

Use this query-parameter to get the summary output of dnsaddrec resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec? pagesize=#no;pageno=#no

Use this query-parameter to get the dnsaddrec resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "dnsaddrec": [ {
hostname:<String_value>,type:<String_value>,nodeid:<Double_value>"ipaddress":<String_value>,
"ecssubnet":<String_value>,
"ttl":<Double_value>,
"vservername":<String_value>,
"authtype":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec/ hostname_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec/ hostname_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec/ hostname_value<String> ? view=summary

Use this query-parameter to get the summary output of dnsaddrec resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "dnsaddrec": [ {
hostname:<String_value>,type:<String_value>,nodeid:<Double_value>"ipaddress":<String_value>,
"ecssubnet":<String_value>,
"ttl":<Double_value>,
"vservername":<String_value>,
"authtype":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/dnsaddrec? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "dnsaddrec": [ { "__count": "#no"} ] }

<!--NeedCopy-->
dnsaddrec