ADC NITRO APIs

dnsnsecrec

Configuration for 0 resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
hostname <String> Read-write Name of the domain.

Minimum length = 1
type <String> Read-write Type of records to display. Available settings function as follows:

* ADNS - Display all authoritative address records.

* PROXY - Display all proxy address records.

* ALL - Display all address records.

Possible values = ALL, ADNS, PROXY
nextnsec <String> Read-only Next nsec record in the chain.
nextrecs <String[]> Read-only An array of record types associated with the nsec record.

Possible values = A, NS, CNAME, SOA, MX, AAAA, SRV, RRSIG, NSEC, DNSKEY, PTR, TXT, NAPTR, CAA
ttl <Double> Read-only Time to Live (TTL), in seconds, for the record.
ecssubnet <String> Read-only Subnet for which this particular record is cached. Subnet caching will occur for responses with EDNS Client Subnet (ECS) option. Applies to resource records obtained through proxy configurations only.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec? args=hostname: <String_value> ,type: <String_value>

Use this query-parameter to get dnsnsecrec resources based on additional properties.

attrs http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of dnsnsecrec resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec? view=summary

Use this query-parameter to get the summary output of dnsnsecrec resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec? pagesize=#no;pageno=#no

Use this query-parameter to get the dnsnsecrec resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "dnsnsecrec": [ {
hostname:<String_value>,type:<String_value>"nextnsec":<String_value>,
"nsecbitarray":<String[]_value>,
"nextrecs":<String[]_value>,
"ttl":<Double_value>,
"ecssubnet":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec/ hostname_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec/ hostname_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec/ hostname_value<String> ? view=summary

Use this query-parameter to get the summary output of dnsnsecrec resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "dnsnsecrec": [ {
hostname:<String_value>,type:<String_value>"nextnsec":<String_value>,
"nsecbitarray":<String[]_value>,
"nextrecs":<String[]_value>,
"ttl":<Double_value>,
"ecssubnet":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/dnsnsecrec? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "dnsnsecrec": [ { "__count": "#no"} ] }

<!--NeedCopy-->
dnsnsecrec