Skip to content

gslbservicegroup

Configuration for GSLB service group resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
servicegroupname<String>Read-writeName of the GSLB service group. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Can be changed after the name is created.
Minimum length = 1
servicetype<String>Read-writeProtocol used to exchange data with the GSLB service.
Possible values = HTTP, FTP, TCP, UDP, SSL, SSL_BRIDGE, SSL_TCP, NNTP, ANY, SIP_UDP, SIP_TCP, SIP_SSL, RADIUS, RDP, RTSP, MYSQL, MSSQL, ORACLE
maxclient<Double>Read-writeMaximum number of simultaneous open connections for the GSLB service group.
Minimum value = 0
Maximum value = 4294967294
cip<String>Read-writeInsert the Client IP header in requests forwarded to the GSLB service.
Possible values = ENABLED, DISABLED
cipheader<String>Read-writeName of the HTTP header whose value must be set to the IP address of the client. Used with the Client IP parameter. If client IP insertion is enabled, and the client IP header is not specified, the value of Client IP Header parameter or the value set by the set ns config command is used as client's IP header name.
Minimum length = 1
healthmonitor<String>Read-writeMonitor the health of this GSLB service.Available settings function are as follows:
YES - Send probes to check the health of the GSLB service.
NO - Do not send probes to check the health of the GSLB service. With the NO option, the appliance shows the service as UP at all times.
Default value: YES
Possible values = YES, NO
clttimeout<Double>Read-writeTime, in seconds, after which to terminate an idle client connection.
Minimum value = 0
Maximum value = 31536000
svrtimeout<Double>Read-writeTime, in seconds, after which to terminate an idle server connection.
Minimum value = 0
Maximum value = 31536000
maxbandwidth<Double>Read-writeMaximum bandwidth, in Kbps, allocated for all the services in the GSLB service group.
Minimum value = 0
Maximum value = 4294967287
monthreshold<Double>Read-writeMinimum sum of weights of the monitors that are bound to this GSLB service. Used to determine whether to mark a GSLB service as UP or DOWN.
Minimum value = 0
Maximum value = 65535
state<String>Read-writeInitial state of the GSLB service group.
Default value: ENABLED
Possible values = ENABLED, DISABLED
downstateflush<String>Read-writeFlush all active transactions associated with all the services in the GSLB service group whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.
Default value: ENABLED
Possible values = ENABLED, DISABLED
comment<String>Read-writeAny information about the GSLB service group.
appflowlog<String>Read-writeEnable logging of AppFlow information for the specified GSLB service group.
Default value: ENABLED
Possible values = ENABLED, DISABLED
autoscale<String>Read-writeAuto scale option for a GSLB servicegroup.
Default value: DISABLED
Possible values = DISABLED, DNS
sitename<String>Read-writeName of the GSLB site to which the service group belongs.
Minimum length = 1
sitepersistence<String>Read-writeUse cookie-based site persistence. Applicable only to HTTP and SSL non-autoscale enabled GSLB servicegroups.
Possible values = ConnectionProxy, HTTPRedirect, NONE
servername<String>Read-writeName of the server to which to bind the service group.
Minimum length = 1
port<Integer>Read-writeServer port number.
Range 1 - 65535
* in CLI is represented as 65535 in NITRO API
weight<Double>Read-writeWeight to assign to the servers in the service group. Specifies the capacity of the servers relative to the other servers in the load balancing configuration. The higher the weight, the higher the percentage of requests sent to the service.
Minimum value = 1
Maximum value = 100
hashid<Double>Read-writeThe hash identifier for the service. This must be unique for each service. This parameter is used by hash based load balancing methods.
Minimum value = 1
publicip<String>Read-writeThe public IP address that a NAT device translates to the GSLB service's private IP address. Optional.
Minimum length = 1
publicport<Integer>Read-writeThe public port associated with the GSLB service's public IP address. The port is mapped to the service's private port number. Applicable to the local GSLB service. Optional.
Minimum value = 1
siteprefix<String>Read-writeThe site's prefix string. When the GSLB service group is bound to a GSLB virtual server, a GSLB site domain is generated internally for each bound serviceitem-domain pair by concatenating the site prefix of the service item and the name of the domain. If the special string NONE is specified, the site-prefix string is unset. When implementing HTTP redirect site persistence, the Citrix ADC redirects GSLB requests to GSLB services by using their site domains.
monitor_name_svc<String>Read-writeName of the monitor bound to the GSLB service group. Used to assign a weight to the monitor.
Minimum length = 1
dup_weight<Double>Read-writeweight of the monitor that is bound to GSLB servicegroup.
Minimum value = 1
delay<Double>Read-writeThe time allowed (in seconds) for a graceful shutdown. During this period, new connections or requests will continue to be sent to this service for clients who already have a persistent session on the system. Connections or requests from fresh or new clients who do not yet have a persistence sessions on the system will not be sent to the service. Instead, they will be load balanced among other available services. After the delay time expires, no new requests or connections will be sent to the service.
graceful<String>Read-writeWait for all existing connections to the service to terminate before shutting down the service.
Default value: NO
Possible values = YES, NO
includemembers<Boolean>Read-writeDisplay the members of the listed GSLB service groups in addition to their settings. Can be specified when no service group name is provided in the command. In that case, the details displayed for each service group are identical to the details displayed when a service group name is provided, except that bound monitors are not displayed.
newname<String>Read-writeNew name for the GSLB service group.
Minimum length = 1
numofconnections<Integer>Read-onlyThis will tell the number of client side connections are still open.
serviceconftype<Boolean>Read-onlyThe configuration type of the GSLB service group.
value<String>Read-onlySSL Status.
Possible values = Certkey not bound, SSL feature disabled
svrstate<String>Read-onlyThe state of the GSLB service.
Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
ip<String>Read-onlyIP Address.
monstatcode<Integer>Read-onlyThe code indicating the monitor response.
monstatparam1<Integer>Read-onlyFirst parameter for use with message code.
monstatparam2<Integer>Read-onlySecond parameter for use with message code.
monstatparam3<Integer>Read-onlyThird parameter for use with message code.
statechangetimemsec<Double>Read-onlyTime when last state change occurred. Milliseconds part.
stateupdatereason<Double>Read-onlyChecks state update reason on the secondary node.
clmonowner<Double>Read-onlyTells the mon owner of the service.
clmonview<Double>Read-onlyTells the view id of the monitoring owner.
groupcount<Double>Read-onlyServicegroup Count.
serviceipstr<String>Read-onlyThis field has been intorduced to show the dbs services ip.
servicegroupeffectivestate<String>Read-onlyIndicates the effective GSLB servicegroup state based on the state of the bound service items.If all services are UP the effective state is UP, if all are DOWN its DOWN,if all are OFS its OFS.If atleast one serviceis UP and rest are either DOWN or OFS, the effective state is PARTIAL-UP.If atleast one bound service is DOWN and rest are OFS the effective state is PARTIAL DOWN.
Possible values = UP, DOWN, OUT OF SERVICE, PARTIAL-UP, PARTIAL-DOWN
gslb<String>Read-only.
Default value: GSLB
Possible values = REMOTE, LOCAL
svreffgslbstate<String>Read-onlyEffective state of the gslb svc.
Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
nodefaultbindings<String>Read-onlyto determine if the configuration is from stylebooks.
Default value: NO
Possible values = YES, NO
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| DELETE| UPDATE| UNSET| ENABLE| DISABLE| RENAME| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"gslbservicegroup":{
<b>"servicegroupname":<String_value>,
</b><b>"servicetype":<String_value>,
</b>"maxclient":<Double_value>,
"cip":<String_value>,
"cipheader":<String_value>,
"healthmonitor":<String_value>,
"clttimeout":<Double_value>,
"svrtimeout":<Double_value>,
"maxbandwidth":<Double_value>,
"monthreshold":<Double_value>,
"state":<String_value>,
"downstateflush":<String_value>,
"comment":<String_value>,
"appflowlog":<String_value>,
"autoscale":<String_value>,
<b>"sitename":<String_value>,
</b>"sitepersistence":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup/servicegroupname_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

update

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"gslbservicegroup":{
<b>"servicegroupname":<String_value>,
</b>"servername":<String_value>,
"port":<Integer_value>,
"weight":<Double_value>,
"hashid":<Double_value>,
"publicip":<String_value>,
"publicport":<Integer_value>,
"siteprefix":<String_value>,
"monitor_name_svc":<String_value>,
"dup_weight":<Double_value>,
"maxclient":<Double_value>,
"healthmonitor":<String_value>,
"cip":<String_value>,
"cipheader":<String_value>,
"clttimeout":<Double_value>,
"svrtimeout":<Double_value>,
"maxbandwidth":<Double_value>,
"monthreshold":<Double_value>,
"downstateflush":<String_value>,
"comment":<String_value>,
"appflowlog":<String_value>,
"sitepersistence":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

unset

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"gslbservicegroup":{
<b>"servicegroupname":<String_value>,
</b>"servername":true,
"port":true,
"weight":true,
"hashid":true,
"publicip":true,
"publicport":true,
"siteprefix":true,
"maxclient":true,
"cip":true,
"clttimeout":true,
"svrtimeout":true,
"maxbandwidth":true,
"monthreshold":true,
"appflowlog":true,
"sitepersistence":true,
"monitor_name_svc":true,
"dup_weight":true,
"healthmonitor":true,
"cipheader":true,
"downstateflush":true,
"comment":true
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

enable

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?action=enable

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"gslbservicegroup":{
<b>"servicegroupname":<String_value>,
</b>"servername":<String_value>,
"port":<Integer_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

disable

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?action=disable

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"gslbservicegroup":{
<b>"servicegroupname":<String_value>,
</b>"servername":<String_value>,
"port":<Integer_value>,
"delay":<Double_value>,
"graceful":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

rename

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?action=rename

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"gslbservicegroup":{
<b>"servicegroupname":<String_value>,
</b><b>"newname":<String_value>
</b>}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup

Query-parameters:

args

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?args=servicegroupname:<String_value>,includemembers:<Boolean_value>

Use this query-parameter to get gslbservicegroup resources based on additional properties.

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of gslbservicegroup resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?pagesize=#no;pageno=#no

Use this query-parameter to get the gslbservicegroup resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "gslbservicegroup": [ {
servicegroupname:<String_value>,includemembers:<Boolean_value>"numofconnections":<Integer_value>,
"servicetype":<String_value>,
"port":<Integer_value>,
"serviceconftype":<Boolean_value>,
"value":<String_value>,
"maxclient":<Double_value>,
"cip":<String_value>,
"cipheader":<String_value>,
"clttimeout":<Double_value>,
"svrtimeout":<Double_value>,
"maxbandwidth":<Double_value>,
"state":<String_value>,
"svrstate":<String_value>,
"delay":<Double_value>,
"ip":<String_value>,
"servername":<String_value>,
"monthreshold":<Double_value>,
"weight":<Double_value>,
"monstatcode":<Integer_value>,
"monstatparam1":<Integer_value>,
"monstatparam2":<Integer_value>,
"monstatparam3":<Integer_value>,
"downstateflush":<String_value>,
"statechangetimemsec":<Double_value>,
"stateupdatereason":<Double_value>,
"clmonowner":<Double_value>,
"clmonview":<Double_value>,
"groupcount":<Double_value>,
"comment":<String_value>,
"hashid":<Double_value>,
"graceful":<String_value>,
"healthmonitor":<String_value>,
"appflowlog":<String_value>,
"autoscale":<String_value>,
"serviceipstr":<String_value>,
"servicegroupeffectivestate":<String_value>,
"sitename":<String_value>,
"gslb":<String_value>,
"publicip":<String_value>,
"publicport":<Integer_value>,
"svreffgslbstate":<String_value>,
"sitepersistence":<String_value>,
"siteprefix":<String_value>,
"nodefaultbindings":<String_value>
}]}

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup/servicegroupname_value<String>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup/servicegroupname_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup/servicegroupname_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "gslbservicegroup": [ {
servicegroupname:<String_value>,includemembers:<Boolean_value>"numofconnections":<Integer_value>,
"servicetype":<String_value>,
"port":<Integer_value>,
"serviceconftype":<Boolean_value>,
"value":<String_value>,
"maxclient":<Double_value>,
"cip":<String_value>,
"cipheader":<String_value>,
"clttimeout":<Double_value>,
"svrtimeout":<Double_value>,
"maxbandwidth":<Double_value>,
"state":<String_value>,
"svrstate":<String_value>,
"delay":<Double_value>,
"ip":<String_value>,
"servername":<String_value>,
"monthreshold":<Double_value>,
"weight":<Double_value>,
"monstatcode":<Integer_value>,
"monstatparam1":<Integer_value>,
"monstatparam2":<Integer_value>,
"monstatparam3":<Integer_value>,
"downstateflush":<String_value>,
"statechangetimemsec":<Double_value>,
"stateupdatereason":<Double_value>,
"clmonowner":<Double_value>,
"clmonview":<Double_value>,
"groupcount":<Double_value>,
"comment":<String_value>,
"hashid":<Double_value>,
"graceful":<String_value>,
"healthmonitor":<String_value>,
"appflowlog":<String_value>,
"autoscale":<String_value>,
"serviceipstr":<String_value>,
"servicegroupeffectivestate":<String_value>,
"sitename":<String_value>,
"gslb":<String_value>,
"publicip":<String_value>,
"publicport":<Integer_value>,
"svreffgslbstate":<String_value>,
"sitepersistence":<String_value>,
"siteprefix":<String_value>,
"nodefaultbindings":<String_value>
}]}

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/gslbservicegroup?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "gslbservicegroup": [ { "__count": "#no"} ] }