Skip to content

gslbdomain_lbmonitor_binding

Binding object showing the lbmonitor that can be bound to gslbdomain.

Properties

(click to see Operations )

Name Data Type Permissions Description
name <String> Read-write Name of the Domain.

Minimum length = 1
monitorname <String> Read-write Monitor name.
monstatcode <Integer> Read-only The code indicating the monitor response.
lastresponse <String> Read-only The string form of monstatcode.
customheaders <String> Read-only The string that is sent to the service. Applicable to HTTP ,HTTP-ECV and RTSP monitor types.
iptunnel <String> Read-only The state of the monitor for tunneled devices.

Possible values = YES, NO
servicename <String> Read-only The service name.
monitortotalprobes <Double> Read-only Total monitor probes.
respcode <String> Read-only The response codes.
vservername <String> Read-only .
httprequest <String> Read-only HTTP request to the backend server.
responsetime <Double> Read-only Response time of this monitor.
monitortotalfailedprobes <Double> Read-only Total probes failed.
monitorcurrentfailedprobes <Double> Read-only Total number of current failed probes.
monstate <String> Read-only Monitor state.

Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_lbmonitor_binding/ name_value<String>

Query-parameters:

filter

http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_lbmonitor_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of gslbdomain_lbmonitor_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination

http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_lbmonitor_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the gslbdomain_lbmonitor_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "gslbdomain_lbmonitor_binding": [ {
      "name":<String_value>,
      "monitorname":<String_value>,
      "monstatcode":<Integer_value>,
      "lastresponse":<String_value>,
      "customheaders":<String_value>,
      "iptunnel":<String_value>,
      "servicename":<String_value>,
      "monitortotalprobes":<Double_value>,
      "respcode":<String_value>,
      "vservername":<String_value>,
      "httprequest":<String_value>,
      "responsetime":<Double_value>,
      "monitortotalfailedprobes":<Double_value>,
      "monitorcurrentfailedprobes":<Double_value>,
      "monstate":<String_value>
}]}

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_lbmonitor_binding

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters:

bulkbindings

http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_lbmonitor_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "gslbdomain_lbmonitor_binding": [ {
      "name":<String_value>,
      "monitorname":<String_value>,
      "monstatcode":<Integer_value>,
      "lastresponse":<String_value>,
      "customheaders":<String_value>,
      "iptunnel":<String_value>,
      "servicename":<String_value>,
      "monitortotalprobes":<Double_value>,
      "respcode":<String_value>,
      "vservername":<String_value>,
      "httprequest":<String_value>,
      "responsetime":<Double_value>,
      "monitortotalfailedprobes":<Double_value>,
      "monitorcurrentfailedprobes":<Double_value>,
      "monstate":<String_value>
}]}

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbdomain_lbmonitor_binding/ name_value<String> ? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"gslbdomain_lbmonitor_binding": [ { "__count": "#no"} ] }