Skip to content

gslbservice_lbmonitor_binding

Binding object showing the lbmonitor that can be bound to gslbservice.

Properties

(click to see Operations )

Name Data Type Permissions Description
servicename <String> Read-write Name of the GSLB service.

Minimum length = 1
weight <Double> Read-write Weight to assign to the monitor-service binding. A larger number specifies a greater weight. Contributes to the monitoring threshold, which determines the state of the service.

Minimum value = 1

Maximum value = 100
monitor_name <String> Read-write Monitor name.
monstate <String> Read-write State of the monitor bound to gslb service.

Possible values = ENABLED, DISABLED
monstatparam2 <Integer> Read-only Second parameter for use with message code.
monstatcode <Integer> Read-only The code indicating the monitor response.
lastresponse <String> Read-only Displays the gslb monitor status in string format.
failedprobes <Double> Read-only Number of the current failed monitoring probes.
monstatparam3 <Integer> Read-only Third parameter for use with message code.
monitor_state <String> Read-only The running state of the monitor on this service.

Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
monitortotalprobes <Double> Read-only Total number of probes sent to monitor this service.
monstatparam1 <Integer> Read-only First parameter for use with message code.
responsetime <Double> Read-only Response time of this monitor.
monitortotalfailedprobes <Double> Read-only Total number of failed probes.
monitorcurrentfailedprobes <Double> Read-only Total number of currently failed probes.
totalfailedprobes <Double> Read-only The total number of failed probs.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/gslbservice_lbmonitor_binding

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"gslbservice_lbmonitor_binding":{
<b>      "servicename":<String_value>,
</b>      "monitor_name":<String_value>,
      "monstate":<String_value>,
      "weight":<Double_value>
}}

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbservice_lbmonitor_binding/ servicename_value<String>

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/gslbservice_lbmonitor_binding/ servicename_value<String> ? args=monitor_name: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbservice_lbmonitor_binding/ servicename_value<String>

Query-parameters:

filter

http:// <netscaler-ip-address> /nitro/v1/config/gslbservice_lbmonitor_binding/ servicename_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of gslbservice_lbmonitor_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination

http:// <netscaler-ip-address> /nitro/v1/config/gslbservice_lbmonitor_binding/ servicename_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the gslbservice_lbmonitor_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "gslbservice_lbmonitor_binding": [ {
      "servicename":<String_value>,
      "weight":<Double_value>,
      "monitor_name":<String_value>,
      "monstate":<String_value>,
      "monstatparam2":<Integer_value>,
      "monstatcode":<Integer_value>,
      "lastresponse":<String_value>,
      "failedprobes":<Double_value>,
      "monstatparam3":<Integer_value>,
      "monitor_state":<String_value>,
      "monitortotalprobes":<Double_value>,
      "monstatparam1":<Integer_value>,
      "responsetime":<Double_value>,
      "monitortotalfailedprobes":<Double_value>,
      "monitorcurrentfailedprobes":<Double_value>,
      "totalfailedprobes":<Double_value>
}]}

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbservice_lbmonitor_binding

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters:

bulkbindings

http:// <netscaler-ip-address> /nitro/v1/config/gslbservice_lbmonitor_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "gslbservice_lbmonitor_binding": [ {
      "servicename":<String_value>,
      "weight":<Double_value>,
      "monitor_name":<String_value>,
      "monstate":<String_value>,
      "monstatparam2":<Integer_value>,
      "monstatcode":<Integer_value>,
      "lastresponse":<String_value>,
      "failedprobes":<Double_value>,
      "monstatparam3":<Integer_value>,
      "monitor_state":<String_value>,
      "monitortotalprobes":<Double_value>,
      "monstatparam1":<Integer_value>,
      "responsetime":<Double_value>,
      "monitortotalfailedprobes":<Double_value>,
      "monitorcurrentfailedprobes":<Double_value>,
      "totalfailedprobes":<Double_value>
}]}

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbservice_lbmonitor_binding/ servicename_value<String> ? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"gslbservice_lbmonitor_binding": [ { "__count": "#no"} ] }