ADC NITRO APIs

gslbvserver_spilloverpolicy_binding

Binding object showing the spilloverpolicy that can be bound to gslbvserver.

Properties

(click to see Operations )

Name Data Type Permissions Description
priority <Double> Read-write Priority.

Minimum value = 1

Maximum value = 2147483647
order <Double> Read-write Order number to be assigned to the service when it is bound to the lb vserver.

Minimum value = 1

Maximum value = 8192
gotopriorityexpression <String> Read-write Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE. o If gotoPriorityExpression is not present or if it is equal to END then the policy bank evaluation ends here o Else if the gotoPriorityExpression is equal to NEXT then the next policy in the priority order is evaluated. o Else gotoPriorityExpression is evaluated. The result of gotoPriorityExpression (which has to be a number) is processed as follows: - An UNDEF event is triggered if . gotoPriorityExpression cannot be evaluated . gotoPriorityExpression evaluates to number which is smaller than the maximum priority in the policy bank but is not same as any policy's priority . gotoPriorityExpression evaluates to a priority that is smaller than the current policy's priority - If the gotoPriorityExpression evaluates to the priority of the current policy then the next policy in the priority order is evaluated. - If the gotoPriorityExpression evaluates to the priority of a policy further ahead in the list then that policy will be evaluated next. This field is applicable only to rewrite and responder policies.
policyname <String> Read-write Name of the policy bound to the GSLB vserver.
name <String> Read-write Name of the virtual server on which to perform the binding operation.

Minimum length = 1
type <String> Read-write The bindpoint to which the policy is bound.

Possible values = REQUEST, RESPONSE, MQTT_JUMBO_REQ
__count <Double> Read-write count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/gslbvserver_spilloverpolicy_binding HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"gslbvserver_spilloverpolicy_binding":{
<b>"name":<String_value>,
</b>"policyname":<String_value>,
"priority":<Double_value>,
"gotopriorityexpression":<String_value>,
"type":<String_value>,
"order":<Double_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbvserver_spilloverpolicy_binding/ name_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/gslbvserver_spilloverpolicy_binding/ name_value<String> ? args=policyname: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbvserver_spilloverpolicy_binding/ name_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/gslbvserver_spilloverpolicy_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of gslbvserver_spilloverpolicy_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/gslbvserver_spilloverpolicy_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the gslbvserver_spilloverpolicy_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "gslbvserver_spilloverpolicy_binding": [ {
"priority":<Double_value>,
"order":<Double_value>,
"gotopriorityexpression":<String_value>,
"policyname":<String_value>,
"name":<String_value>,
"type":<String_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbvserver_spilloverpolicy_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/gslbvserver_spilloverpolicy_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "gslbvserver_spilloverpolicy_binding": [ {
"priority":<Double_value>,
"order":<Double_value>,
"gotopriorityexpression":<String_value>,
"policyname":<String_value>,
"name":<String_value>,
"type":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/gslbvserver_spilloverpolicy_binding/ name_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"gslbvserver_spilloverpolicy_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
gslbvserver_spilloverpolicy_binding