ADC NITRO APIs

lsnsipalgprofile

Configuration for LSN SIPALG Profile resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
sipalgprofilename <String> Read-write The name of the SIPALG Profile.

Minimum length = 1

Maximum length = 127
datasessionidletimeout <Double> Read-write Idle timeout for the data channel sessions in seconds.

Default value: 120
sipsessiontimeout <Double> Read-write SIP control channel session timeout in seconds.

Default value: 600
registrationtimeout <Double> Read-write SIP registration timeout in seconds.

Default value: 60
sipsrcportrange <String> Read-write Source port range for SIP_UDP and SIP_TCP.
sipdstportrange <String> Read-write Destination port range for SIP_UDP and SIP_TCP.
openregisterpinhole <String> Read-write ENABLE/DISABLE RegisterPinhole creation.

Default value: ENABLED

Possible values = ENABLED, DISABLED
opencontactpinhole <String> Read-write ENABLE/DISABLE ContactPinhole creation.

Default value: ENABLED

Possible values = ENABLED, DISABLED
openviapinhole <String> Read-write ENABLE/DISABLE ViaPinhole creation.

Default value: ENABLED

Possible values = ENABLED, DISABLED
openrecordroutepinhole <String> Read-write ENABLE/DISABLE RecordRoutePinhole creation.

Default value: ENABLED

Possible values = ENABLED, DISABLED
siptransportprotocol <String> Read-write SIP ALG Profile transport protocol type.

Possible values = TCP, UDP
openroutepinhole <String> Read-write ENABLE/DISABLE RoutePinhole creation.

Default value: ENABLED

Possible values = ENABLED, DISABLED
rport <String> Read-write ENABLE/DISABLE rport.

Default value: ENABLED

Possible values = ENABLED, DISABLED
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • UPDATE
  • UNSET
  • GET (ALL)
  • GET
  • COUNT
  • DELETE

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lsnsipalgprofile":{
<b>"sipalgprofilename":<String_value>,
</b>"datasessionidletimeout":<Double_value>,
"sipsessiontimeout":<Double_value>,
"registrationtimeout":<Double_value>,
"sipsrcportrange":<String_value>,
"sipdstportrange":<String_value>,
"openregisterpinhole":<String_value>,
"opencontactpinhole":<String_value>,
"openviapinhole":<String_value>,
"openrecordroutepinhole":<String_value>,
<b>"siptransportprotocol":<String_value>,
</b>"openroutepinhole":<String_value>,
"rport":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lsnsipalgprofile":{
<b>"sipalgprofilename":<String_value>,
</b>"datasessionidletimeout":<Double_value>,
"sipsessiontimeout":<Double_value>,
"registrationtimeout":<Double_value>,
"sipsrcportrange":<String_value>,
"sipdstportrange":<String_value>,
"openregisterpinhole":<String_value>,
"opencontactpinhole":<String_value>,
"openviapinhole":<String_value>,
"openrecordroutepinhole":<String_value>,
"siptransportprotocol":<String_value>,
"openroutepinhole":<String_value>,
"rport":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lsnsipalgprofile":{
<b>"sipalgprofilename":<String_value>,
</b>"datasessionidletimeout":true,
"sipsessiontimeout":true,
"registrationtimeout":true,
"sipsrcportrange":true,
"sipdstportrange":true,
"openregisterpinhole":true,
"opencontactpinhole":true,
"openviapinhole":true,
"openrecordroutepinhole":true,
"siptransportprotocol":true,
"openroutepinhole":true,
"rport":true
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile/ sipalgprofilename_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of lsnsipalgprofile resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile? view=summary

Use this query-parameter to get the summary output of lsnsipalgprofile resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile? pagesize=#no;pageno=#no

Use this query-parameter to get the lsnsipalgprofile resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lsnsipalgprofile": [ {
"sipalgprofilename":<String_value>,
"datasessionidletimeout":<Double_value>,
"sipsessiontimeout":<Double_value>,
"registrationtimeout":<Double_value>,
"sipsrcportrange":<String_value>,
"sipdstportrange":<String_value>,
"openregisterpinhole":<String_value>,
"opencontactpinhole":<String_value>,
"openviapinhole":<String_value>,
"openrecordroutepinhole":<String_value>,
"siptransportprotocol":<String_value>,
"openroutepinhole":<String_value>,
"rport":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile/ sipalgprofilename_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile/ sipalgprofilename_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile/ sipalgprofilename_value<String> ? view=summary

Use this query-parameter to get the summary output of lsnsipalgprofile resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "lsnsipalgprofile": [ {
"sipalgprofilename":<String_value>,
"datasessionidletimeout":<Double_value>,
"sipsessiontimeout":<Double_value>,
"registrationtimeout":<Double_value>,
"sipsrcportrange":<String_value>,
"sipdstportrange":<String_value>,
"openregisterpinhole":<String_value>,
"opencontactpinhole":<String_value>,
"openviapinhole":<String_value>,
"openrecordroutepinhole":<String_value>,
"siptransportprotocol":<String_value>,
"openroutepinhole":<String_value>,
"rport":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsipalgprofile? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lsnsipalgprofile": [ { "__count": "#no"} ] }

<!--NeedCopy-->
lsnsipalgprofile