Skip to content

bridgegroup

Configuration for bridge group resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
id<Double>Read-writeAn integer that uniquely identifies the bridge group.
Minimum value = 1
Maximum value = 1000
dynamicrouting<String>Read-writeEnable dynamic routing for this bridgegroup.
Default value: DISABLED
Possible values = ENABLED, DISABLED
ipv6dynamicrouting<String>Read-writeEnable all IPv6 dynamic routing protocols on all VLANs bound to this bridgegroup. Note: For the ENABLED setting to work, you must configure IPv6 dynamic routing protocols from the VTYSH command line.
Default value: DISABLED
Possible values = ENABLED, DISABLED
flags<Boolean>Read-onlyTemporary flag used for internal purpose.
portbitmap<Double>Read-onlyMember interfaces of this bridge group.
tagbitmap<Double>Read-onlyTagged members of this bridge group.
ifaces<String>Read-onlyNames of all member interfaces of this bridge group.
tagifaces<String>Read-onlyNames of all tagged member interfaces of this bridge group.
rnat<Boolean>Read-onlyTemporary flag used for internal purpose.
partitionname<String>Read-onlyName of the Partition to which this vlan bound to.
Minimum length = 1
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| DELETE| UPDATE| UNSET| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"bridgegroup":{
<b>"id":<Double_value>,
</b>"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup/id_value<Double>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

update

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"bridgegroup":{
<b>"id":<Double_value>,
</b>"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

unset

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"bridgegroup":{
<b>"id":<Double_value>,
</b>"dynamicrouting":true,
"ipv6dynamicrouting":true
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of bridgegroup resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup?pagesize=#no;pageno=#no

Use this query-parameter to get the bridgegroup resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "bridgegroup": [ {
"id":<Double_value>,
"flags":<Boolean_value>,
"portbitmap":<Double_value>,
"tagbitmap":<Double_value>,
"ifaces":<String_value>,
"tagifaces":<String_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"rnat":<Boolean_value>,
"partitionname":<String_value>
}]}

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup/id_value<Double>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup/id_value<Double>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup/id_value<Double>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "bridgegroup": [ {
"id":<Double_value>,
"flags":<Boolean_value>,
"portbitmap":<Double_value>,
"tagbitmap":<Double_value>,
"ifaces":<String_value>,
"tagifaces":<String_value>,
"dynamicrouting":<String_value>,
"ipv6dynamicrouting":<String_value>,
"rnat":<Boolean_value>,
"partitionname":<String_value>
}]}

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/bridgegroup?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "bridgegroup": [ { "__count": "#no"} ] }