ADC NITRO APIs

forwardingsession

Configuration for session forward resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name <String> Read-write Name for the forwarding session rule. Can begin with a letter, number, or the underscore character (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Cannot be changed after the rule is created.

The following requirement applies only to the Citrix ADC CLI:

If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my rule" or 'my rule').

Minimum length = 1
network <String> Read-write An IPv4 network address or IPv6 prefix of a network from which the forwarded traffic originates or to which it is destined.

Minimum length = 1
netmask <String> Read-write Subnet mask associated with the network.

Minimum length = 1
acl6name <String> Read-write Name of any configured ACL6 whose action is ALLOW. The rule of the ACL6 is used as a forwarding session rule.

Minimum length = 1
aclname <String> Read-write Name of any configured ACL whose action is ALLOW. The rule of the ACL is used as a forwarding session rule.

Minimum length = 1
td <Double> Read-write Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value = 0

Maximum value = 4094
connfailover <String> Read-write Synchronize connection information with the secondary appliance in a high availability (HA) pair. That is, synchronize all connection-related information for the forwarding session.

Default value: DISABLED

Possible values = ENABLED, DISABLED
sourceroutecache <String> Read-write Cache the source ip address and mac address of the DA servers.

Default value: DISABLED

Possible values = ENABLED, DISABLED
processlocal <String> Read-write Enabling this option on forwarding session will not steer the packet to flow processor. Instead, packet will be routed.

Default value: DISABLED

Possible values = ENABLED, DISABLED
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • UPDATE
  • DELETE
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"forwardingsession":{
<b>"name":<String_value>,
</b>"network":<String_value>,
"netmask":<String_value>,
"acl6name":<String_value>,
"aclname":<String_value>,
"td":<Double_value>,
"connfailover":<String_value>,
"sourceroutecache":<String_value>,
"processlocal":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"forwardingsession":{
<b>"name":<String_value>,
</b>"connfailover":<String_value>,
"sourceroutecache":<String_value>,
"processlocal":<String_value>,
"acl6name":<String_value>,
"aclname":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession/ name_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of forwardingsession resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession? view=summary

Use this query-parameter to get the summary output of forwardingsession resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession? pagesize=#no;pageno=#no

Use this query-parameter to get the forwardingsession resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "forwardingsession": [ {
"name":<String_value>,
"network":<String_value>,
"netmask":<String_value>,
"td":<Double_value>,
"aclname":<String_value>,
"acl6name":<String_value>,
"connfailover":<String_value>,
"sourceroutecache":<String_value>,
"processlocal":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of forwardingsession resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "forwardingsession": [ {
"name":<String_value>,
"network":<String_value>,
"netmask":<String_value>,
"td":<Double_value>,
"aclname":<String_value>,
"acl6name":<String_value>,
"connfailover":<String_value>,
"sourceroutecache":<String_value>,
"processlocal":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/forwardingsession? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "forwardingsession": [ { "__count": "#no"} ] }

<!--NeedCopy-->
forwardingsession