ADC NITRO APIs

mapbmr

Configuration for MAP-T Basic Mapping rule resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name <String> Read-write Name for the Basic Mapping Rule. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the MAP Basic Mapping Rule is created. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "add network MapBmr bmr1 -natprefix 2005::/64 -EAbitLength 16 -psidoffset 6 -portsharingratio 8" ).

The Basic Mapping Rule information allows a MAP BR to determine source IPv4 address from the IPv6 packet sent from MAP CE device.

Also it allows to determine destination IPv6 address of MAP CE before sending packets to MAP CE.

Minimum length = 1

Maximum length = 127
ruleipv6prefix <String> Read-write IPv6 prefix of Customer Edge(CE) device.MAP-T CE will send ipv6 packets with this ipv6 prefix as source ipv6 address prefix.
psidoffset <Double> Read-write Start bit position of Port Set Identifier(PSID) value in Embedded Address (EA) bits.

Default value: 6

Minimum value = 1

Maximum value = 15
eabitlength <Double> Read-write The Embedded Address (EA) bit field encodes the CE-specific IPv4 address and port information. The EA bit field, which is unique for a

given Rule IPv6 prefix.

Default value: 16

Minimum value = 2

Maximum value = 47
psidlength <Double> Read-write Length of Port Set IdentifierPort Set Identifier(PSID) in Embedded Address (EA) bits.

Default value: 8

Minimum value = 1

Maximum value = 16
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/mapbmr HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"mapbmr":{
<b>"name":<String_value>,
</b><b>"ruleipv6prefix":<String_value>,
</b>"psidoffset":<Double_value>,
"eabitlength":<Double_value>,
"psidlength":<Double_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/mapbmr/ name_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/mapbmr Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/mapbmr? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/mapbmr? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of mapbmr resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/mapbmr? view=summary

Use this query-parameter to get the summary output of mapbmr resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/mapbmr? pagesize=#no;pageno=#no

Use this query-parameter to get the mapbmr resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "mapbmr": [ {
"name":<String_value>,
"ruleipv6prefix":<String_value>,
"eabitlength":<Double_value>,
"psidoffset":<Double_value>,
"psidlength":<Double_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/mapbmr/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/mapbmr/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/mapbmr/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of mapbmr resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "mapbmr": [ {
"name":<String_value>,
"ruleipv6prefix":<String_value>,
"eabitlength":<Double_value>,
"psidoffset":<Double_value>,
"psidlength":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/mapbmr? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "mapbmr": [ { "__count": "#no"} ] }

<!--NeedCopy-->
mapbmr