Skip to content

nd6

Configuration for nd6 resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
neighbor<String>Read-writeLink-local IPv6 address of the adjacent network device to add to the ND6 table.
mac<String>Read-writeMAC address of the adjacent network device.
ifnum<String>Read-writeInterface through which the adjacent network device is available, specified in slot/port notation (for example, 1/3). Use spaces to separate multiple entries.
vlan<Integer>Read-writeInteger value that uniquely identifies the VLAN on which the adjacent network device exists.
Minimum value = 1
Maximum value = 4094
vxlan<Double>Read-writeID of the VXLAN on which the IPv6 address of this ND6 entry is reachable.
Minimum value = 1
Maximum value = 16777215
vtep<String>Read-writeIP address of the VXLAN tunnel endpoint (VTEP) through which the IPv6 address of this ND6 entry is reachable.
Minimum length = 1
td<Double>Read-writeInteger value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
Minimum value = 0
Maximum value = 4094
nodeid<Double>Read-writeUnique number that identifies the cluster node.
Minimum value = 0
Maximum value = 31
state<String>Read-onlyND6 state.
Default value: REACHABLE
Possible values = INCOMPLETE, REACHABLE, STALE, DELAY, PROBE
timeout<Double>Read-onlyTime elapsed.
flags<Double>Read-onlyflag for static/permanent entry.
controlplane<Boolean>Read-onlyThis nd6 entry is populated by a control plane protocol.
channel<Double>Read-onlyThe tunnel that is bound to a netbridge.
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| CLEAR| DELETE| GET (ALL)| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"nd6":{
<b>"neighbor":<String_value>,
</b><b>"mac":<String_value>,
</b>"ifnum":<String_value>,
"vlan":<Integer_value>,
"vxlan":<Double_value>,
"vtep":<String_value>,
"td":<Double_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

clear

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6?action=clear

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"nd6":{
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

delete

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6/neighbor_value<String>

HTTP Method:DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6

Query-parameters:

args

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6?args=neighbor:<String_value>,td:<Double_value>,nodeid:<Double_value>

Use this query-parameter to get nd6 resources based on additional properties.

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of nd6 resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6?pagesize=#no;pageno=#no

Use this query-parameter to get the nd6 resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "nd6": [ {
neighbor:<String_value>,td:<Double_value>,nodeid:<Double_value>"mac":<String_value>,
"state":<String_value>,
"timeout":<Double_value>,
"ifnum":<String_value>,
"vlan":<Integer_value>,
"vxlan":<Double_value>,
"vtep":<String_value>,
"flags":<Double_value>,
"controlplane":<Boolean_value>,
"channel":<Double_value>
}]}

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/nd6?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "nd6": [ { "__count": "#no"} ] }