Skip to content

rnat6

Configuration for IPv6 RNAT configured route resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
name<String>Read-writeName for the RNAT6 rule. Must begin with a letter, number, or the underscore character (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore characters. Cannot be changed after the rule is created. Choose a name that helps identify the RNAT6 rule.
Minimum length = 1
network<String>Read-writeIPv6 address of the network on whose traffic you want the Citrix ADC to do RNAT processing.
Minimum length = 1
acl6name<String>Read-writeName of any configured ACL6 whose action is ALLOW. The rule of the ACL6 is used as an RNAT6 rule.
Minimum length = 1
redirectport<Integer>Read-writePort number to which the IPv6 packets are redirected. Applicable to TCP and UDP protocols.
Minimum value = 1
Maximum value = 65535
td<Double>Read-writeInteger value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
Minimum value = 0
Maximum value = 4094
srcippersistency<String>Read-writeEnable source ip persistency, which enables the Citrix ADC to use the RNAT ips using source ip.
Default value: DISABLED
Possible values = ENABLED, DISABLED
ownergroup<String>Read-writeThe owner node group in a Cluster for this rnat rule.
Default value: DEFAULT_NG
Minimum length = 1
__count<Double>Read-onlycount parameter

Operations

(click to see Properties)

ADD| UPDATE| UNSET| CLEAR| GET (ALL)| GET| COUNT

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

add

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"rnat6":{
<b>"name":<String_value>,
</b>"network":<String_value>,
"acl6name":<String_value>,
"redirectport":<Integer_value>,
"td":<Double_value>,
"srcippersistency":<String_value>,
"ownergroup":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

update

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6

HTTP Method:PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"rnat6":{
<b>"name":<String_value>,
</b>"redirectport":<Integer_value>,
"srcippersistency":<String_value>,
"ownergroup":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

unset

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6?action=unset

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"rnat6":{
<b>"name":<String_value>,
</b>"redirectport":true,
"srcippersistency":true,
"ownergroup":true
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

clear

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6?action=clear

HTTP Method:POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Content-Type:application/json

Request Payload:

{"rnat6":{
<b>"name":<String_value>,
</b>"ownergroup":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the error

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6?filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of rnat6 resources configured on Citrix ADC. Filtering can be done on any of the properties of the resource.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6?pagesize=#no;pageno=#no

Use this query-parameter to get the rnat6 resources in chunks.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "rnat6": [ {
"name":<String_value>,
"network":<String_value>,
"td":<Double_value>,
"acl6name":<String_value>,
"redirectport":<Integer_value>,
"srcippersistency":<String_value>,
"ownergroup":<String_value>
}]}

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6/name_value<String>

Query-parameters:

attrs

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6/name_value<String>?attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6/name_value<String>?view=summary

Note:By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "rnat6": [ {
"name":<String_value>,
"network":<String_value>,
"td":<Double_value>,
"acl6name":<String_value>,
"redirectport":<Integer_value>,
"srcippersistency":<String_value>,
"ownergroup":<String_value>
}]}

count

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/rnat6?count=yes

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "rnat6": [ { "__count": "#no"} ] }