Skip to content

nsparam

Configuration for Citrix ADC parameters resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
httpport <Integer[]> Read-write HTTP ports on the web server. This allows the system to perform connection off-load for any client request that has a destination port matching one of these configured ports.

Minimum value = 1

Maximum value = 65535
maxconn <Double> Read-write Maximum number of connections that will be made from the appliance to the web server(s) attached to it. The value entered here is applied globally to all attached servers.

Default value: 0

Minimum value = 0

Maximum value = 4294967294
maxreq <Double> Read-write Maximum number of requests that the system can pass on a particular connection between the appliance and a server attached to it. Setting this value to 0 allows an unlimited number of requests to be passed. This value is overridden by the maximum number of requests configured on the individual service.

Minimum value = 0

Maximum value = 65535
cip <String> Read-write Enable or disable the insertion of the actual client IP address into the HTTP header request passed from the client to one, some, or all servers attached to the system. The passed address can then be accessed through a minor modification to the server.

* If the CIP header is specified, it will be used as the client IP header.

* If the CIP header is not specified, the value that has been set will be used as the client IP header.

Possible values = ENABLED, DISABLED
cipheader <String> Read-write Text that will be used as the client IP address header.

Minimum length = 1
cookieversion <String> Read-write Version of the cookie inserted by the system.

Possible values = 0, 1
securecookie <String> Read-write Enable or disable secure flag for persistence cookie.

Default value: ENABLED

Possible values = ENABLED, DISABLED
pmtumin <Double> Read-write Minimum path MTU value that Citrix ADC will process in the ICMP fragmentation needed message. If the ICMP message contains a value less than this value, then this value is used instead.

Default value: 576

Minimum value = 168

Maximum value = 1500
pmtutimeout <Double> Read-write Interval, in minutes, for flushing the PMTU entries.

Default value: 10

Minimum value = 1

Maximum value = 1440
ftpportrange <String> Read-write Minimum and maximum port (port range) that FTP services are allowed to use.

Minimum length = 1024

Maximum length = 64000
crportrange <String> Read-write Port range for cache redirection services.

Minimum length = 1

Maximum length = 65535
timezone <String> Read-write Time zone for the Citrix ADC. Name of the time zone should be specified as argument.

Default value: CoordinatedUniversalTime

Minimum length = 1

Maximum length = 63
grantquotamaxclient <Double> Read-write Percentage of shared quota to be granted at a time for maxClient.

Default value: 10

Minimum value = 0

Maximum value = 100
exclusivequotamaxclient <Double> Read-write Percentage of maxClient to be given to PEs.

Default value: 80

Minimum value = 0

Maximum value = 100
grantquotaspillover <Double> Read-write Percentage of shared quota to be granted at a time for spillover.

Default value: 10

Minimum value = 0

Maximum value = 100
exclusivequotaspillover <Double> Read-write Percentage of maximum limit to be given to PEs.

Default value: 80

Minimum value = 0

Maximum value = 100
useproxyport <String> Read-write Enable/Disable use_proxy_port setting.

Default value: ENABLED

Possible values = ENABLED, DISABLED
internaluserlogin <String> Read-write Enables/disables the internal user from logging in to the appliance. Before disabling internal user login, you must have key-based authentication set up on the appliance. The file name for the key pair must be "ns_comm_key".

Default value: ENABLED

Possible values = ENABLED, DISABLED
aftpallowrandomsourceport <String> Read-write Allow the FTP server to come from a random source port for active FTP data connections.

Default value: DISABLED

Possible values = ENABLED, DISABLED
icaports <Integer[]> Read-write The ICA ports on the Web server. This allows the system to perform connection off-load for any

client request that has a destination port matching one of these configured ports.

Minimum value = 1
tcpcip <String> Read-write Enable or disable the insertion of the client TCP/IP header in TCP payload passed from the client to one, some, or all servers attached to the system. The passed address can then be accessed through a minor modification to the server.

Default value: DISABLED

Possible values = ENABLED, DISABLED
servicepathingressvlan <Double> Read-write VLAN on which the subscriber traffic arrives on the appliance.

Minimum value = 1
secureicaports <Integer[]> Read-write The Secure ICA ports on the Web server. This allows the system to perform connection off-load for any

client request that has a destination port matching one of these configured ports.

Minimum value = 1
mgmthttpport <Integer> Read-write This allow the configuration of management HTTP port.

Default value: 80

Minimum value = 1

Maximum value = 65534
mgmthttpsport <Integer> Read-write This allows the configuration of management HTTPS port.

Default value: 443

Minimum value = 1

Maximum value = 65534
proxyprotocol <String> Read-write Disable/Enable v1 or v2 proxy protocol header for client info insertion.

Default value: DISABLED

Possible values = ENABLED, DISABLED
advancedanalyticsstats <String> Read-write Disable/Enable advanace analytics stats.

Default value: DISABLED

Possible values = ENABLED, DISABLED

Operations

(click to see Properties )

  • UPDATE
  • UNSET
  • GET (ALL)

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/nsparam

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nsparam":{
      "httpport":<Integer[]_value>,
      "maxconn":<Double_value>,
      "maxreq":<Double_value>,
      "cip":<String_value>,
      "cipheader":<String_value>,
      "cookieversion":<String_value>,
      "securecookie":<String_value>,
      "pmtumin":<Double_value>,
      "pmtutimeout":<Double_value>,
      "ftpportrange":<String_value>,
      "crportrange":<String_value>,
      "timezone":<String_value>,
      "grantquotamaxclient":<Double_value>,
      "exclusivequotamaxclient":<Double_value>,
      "grantquotaspillover":<Double_value>,
      "exclusivequotaspillover":<Double_value>,
      "useproxyport":<String_value>,
      "internaluserlogin":<String_value>,
      "aftpallowrandomsourceport":<String_value>,
      "icaports":<Integer[]_value>,
      "tcpcip":<String_value>,
      "servicepathingressvlan":<Double_value>,
      "secureicaports":<Integer[]_value>,
      "mgmthttpport":<Integer_value>,
      "mgmthttpsport":<Integer_value>,
      "proxyprotocol":<String_value>,
      "advancedanalyticsstats":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/nsparam? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nsparam":{
      "ftpportrange":true,
      "crportrange":true,
      "aftpallowrandomsourceport":true,
      "httpport":true,
      "maxconn":true,
      "maxreq":true,
      "cip":true,
      "cipheader":true,
      "cookieversion":true,
      "securecookie":true,
      "pmtumin":true,
      "pmtutimeout":true,
      "timezone":true,
      "grantquotamaxclient":true,
      "exclusivequotamaxclient":true,
      "grantquotaspillover":true,
      "exclusivequotaspillover":true,
      "useproxyport":true,
      "internaluserlogin":true,
      "icaports":true,
      "tcpcip":true,
      "servicepathingressvlan":true,
      "secureicaports":true,
      "mgmthttpport":true,
      "mgmthttpsport":true,
      "proxyprotocol":true,
      "advancedanalyticsstats":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/nsparam

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nsparam": [ {
      "httpport":<Integer[]_value>,
      "maxconn":<Double_value>,
      "maxreq":<Double_value>,
      "cip":<String_value>,
      "cipheader":<String_value>,
      "cookieversion":<String_value>,
      "securecookie":<String_value>,
      "pmtumin":<Double_value>,
      "pmtutimeout":<Double_value>,
      "ftpportrange":<String_value>,
      "crportrange":<String_value>,
      "timezone":<String_value>,
      "grantquotamaxclient":<Double_value>,
      "exclusivequotamaxclient":<Double_value>,
      "grantquotaspillover":<Double_value>,
      "exclusivequotaspillover":<Double_value>,
      "useproxyport":<String_value>,
      "internaluserlogin":<String_value>,
      "aftpallowrandomsourceport":<String_value>,
      "icaports":<Integer[]_value>,
      "tcpcip":<String_value>,
      "servicepathingressvlan":<Double_value>,
      "secureicaports":<Integer[]_value>,
      "mgmthttpport":<Integer_value>,
      "mgmthttpsport":<Integer_value>,
      "proxyprotocol":<String_value>,
      "advancedanalyticsstats":<String_value>
}]}