ADC NITRO APIs

nstrafficdomain

Configuration for Traffic Domain resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
td <Double> Read-write Integer value that uniquely identifies a traffic domain.

Minimum value = 1

Maximum value = 4094
aliasname <String> Read-write Name of traffic domain being added.

Minimum length = 1

Maximum length = 31
vmac <String> Read-write Associate the traffic domain with a VMAC address instead of with VLANs. The Citrix ADC then sends the VMAC address of the traffic domain in all responses to ARP queries for network entities in that domain. As a result, the ADC can segregate subsequent incoming traffic for this traffic domain on the basis of the destination MAC address, because the destination MAC address is the VMAC address of the traffic domain. After creating entities on a traffic domain, you can easily manage and monitor them by performing traffic domain level operations.

Default value: DISABLED

Possible values = ENABLED, DISABLED
state <String> Read-only The state of TrafficDmain.

Default value: ENABLED

Possible values = ENABLED, DISABLED
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • CLEAR
  • ENABLE
  • DISABLE
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nstrafficdomain":{
<b>"td":<Double_value>,
</b>"aliasname":<String_value>,
"vmac":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain/ td_value<Double> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

clear

URL: http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain? action=clear HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nstrafficdomain":{
<b>"td":<Double_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

enable

URL: http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain? action=enable HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nstrafficdomain":{
<b>"td":<Double_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

disable

URL: http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain? action=disable HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nstrafficdomain":{
<b>"td":<Double_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of nstrafficdomain resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain? view=summary

Use this query-parameter to get the summary output of nstrafficdomain resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain? pagesize=#no;pageno=#no

Use this query-parameter to get the nstrafficdomain resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nstrafficdomain": [ {
"td":<Double_value>,
"aliasname":<String_value>,
"vmac":<String_value>,
"state":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain/ td_value<Double> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain/ td_value<Double> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain/ td_value<Double> ? view=summary

Use this query-parameter to get the summary output of nstrafficdomain resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "nstrafficdomain": [ {
"td":<Double_value>,
"aliasname":<String_value>,
"vmac":<String_value>,
"state":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/nstrafficdomain? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nstrafficdomain": [ { "__count": "#no"} ] }

<!--NeedCopy-->
nstrafficdomain