ADC NITRO APIs

snmpmanager

Configuration for manager resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
ipaddress <String> Read-write IP address of the SNMP manager. Can be an IPv4 or IPv6 address. You can instead specify an IPv4 network address or IPv6 network prefix if you want the Citrix ADC to respond to SNMP queries from any device on the specified network. Alternatively, instead of an IPv4 address, you can specify a host name that has been assigned to an SNMP manager. If you do so, you must add a DNS name server that resolves the host name of the SNMP manager to its IP address.

Note: The Citrix ADC does not support host names for SNMP managers that have IPv6 addresses.

Minimum length = 1

Maximum length = 255
netmask <String> Read-write Subnet mask associated with an IPv4 network address. If the IP address specifies the address or host name of a specific host, accept the default value of 255.255.255.255.
domainresolveretry <Integer> Read-write Amount of time, in seconds, for which the Citrix ADC waits before sending another DNS query to resolve the host name of the SNMP manager if the last query failed. This parameter is valid for host-name based SNMP managers only. After a query succeeds, the TTL determines the wait time. The minimum and default value is 5.

Minimum value = 5

Maximum value = 20939
ip <String> Read-only The resolved IP address of the hostname manager.
domain <String> Read-only IP address of manager. It will be zero for hostname manager.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • UPDATE
  • UNSET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"snmpmanager":{
<b>"ipaddress":<String_value>,
</b>"netmask":<String_value>,
"domainresolveretry":<Integer_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager/ ipaddress_value<String> Query-parameters: args=netmask: <String_value>

</b>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"snmpmanager":{
<b>"ipaddress":<String_value>,
</b>"netmask":<String_value>,
"domainresolveretry":<Integer_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"snmpmanager":{
<b>"ipaddress":<String_value>,
</b>"netmask":<String_value>,
"domainresolveretry":true
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of snmpmanager resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager? view=summary

Use this query-parameter to get the summary output of snmpmanager resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager? pagesize=#no;pageno=#no

Use this query-parameter to get the snmpmanager resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "snmpmanager": [ {
"ipaddress":<String_value>,
"netmask":<String_value>,
"ip":<String_value>,
"domain":<String_value>,
"domainresolveretry":<Integer_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpmanager? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "snmpmanager": [ { "__count": "#no"} ] }

<!--NeedCopy-->
snmpmanager