ADC NITRO APIs

snmptrap_snmpuser_binding

Binding object showing the snmpuser that can be bound to snmptrap.

Properties

(click to see Operations )

Name Data Type Permissions Description
trapclass <String> Read-write Type of trap messages that the Citrix ADC sends to the trap listener: Generic or the enterprise-specific messages defined in the MIB file.

Possible values = generic, specific
securitylevel <String> Read-write Security level of the SNMPv3 trap.

Default value: authNoPriv,

Possible values = noAuthNoPriv, authNoPriv, authPriv
username <String> Read-write Name of the SNMP user that will send the SNMPv3 traps.
td <Double> Read-write Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

Minimum value = 0

Maximum value = 4094
trapdestination <String> Read-write IPv4 or the IPv6 address of the trap listener to which the Citrix ADC is to send SNMP trap messages.

Minimum length = 1
version <String> Read-write SNMP version, which determines the format of trap messages sent to the trap listener. This setting must match the setting on the trap listener. Otherwise, the listener drops the trap messages.

Default value: V3

Possible values = V1, V2, V3
__count <Double> Read-write count parameter

Operations

(click to see Properties )

  • GET
  • GET (ALL)
  • COUNT
  • ADD
  • DELETE

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/snmptrap_snmpuser_binding HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"snmptrap_snmpuser_binding":{
<b>"trapclass":<String_value>,
</b><b>"trapdestination":<String_value>,
</b>"td":<Double_value>,
"version":<String_value>,
<b>"username":<String_value>,
</b>"securitylevel":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmptrap_snmpuser_binding/ trapclass_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/snmptrap_snmpuser_binding/ trapclass_value<String> ? args= trapdestination:<String_value>, td: <Double_value> ,version: <String_value> , username:<String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmptrap_snmpuser_binding Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/snmptrap_snmpuser_binding? args=trapdestination:<String_value>,version:<String_value>,td:<Double_value>,trapclass:<String_value>

Use this query-parameter to get snmptrap_snmpuser_binding resources based on additional properties.

filter http:// <netscaler-ip-address> /nitro/v1/config/snmptrap_snmpuser_binding? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of snmptrap_snmpuser_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/snmptrap_snmpuser_binding? pagesize=#no;pageno=#no

Use this query-parameter to get the snmptrap_snmpuser_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "snmptrap_snmpuser_binding": [ {
"trapclass":<String_value>,
"securitylevel":<String_value>,
"username":<String_value>,
"td":<Double_value>,
"trapdestination":<String_value>,
"version":<String_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmptrap_snmpuser_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/snmptrap_snmpuser_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "snmptrap_snmpuser_binding": [ {
"trapclass":<String_value>,
"securitylevel":<String_value>,
"username":<String_value>,
"td":<Double_value>,
"trapdestination":<String_value>,
"version":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmptrap_snmpuser_binding? args=trapdestination:<String_value>,version:<String_value>,td:<Double_value>,trapclass:<String_value>;count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "snmptrap_snmpuser_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
snmptrap_snmpuser_binding