Skip to content

sslcipher_individualcipher_binding

Binding object showing the individualcipher that can be bound to sslcipher.

Properties

(click to see Operations )

Name Data Type Permissions Description
ciphername <String> Read-write Cipher name.
ciphgrpals <String> Read-write A cipher-suite can consist of an individual cipher name, the system predefined cipher-alias name, or user defined cipher-group name.

Minimum length = 1
cipherpriority <Double> Read-write This indicates priority assigned to the particular cipher.

Minimum value = 1
description <String> Read-write Cipher suite description.
ciphergroupname <String> Read-write Name of the user-defined cipher group.

Minimum length = 1
cipheroperation <String> Read-write The operation that is performed when adding the cipher-suite. Possible cipher operations are: ADD - Appends the given cipher-suite to the existing one configured for the virtual server. REM - Removes the given cipher-suite from the existing one configured for the virtual server. ORD - Overrides the current configured cipher-suite for the virtual server with the given cipher-suite.

Default value: 0

Possible values = ADD, REM, ORD
__count <Double> Read-write count parameter

Operations

(click to see Properties )

  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslcipher_individualcipher_binding/ ciphergroupname_value<String>

Query-parameters:

filter

http:// <netscaler-ip-address> /nitro/v1/config/sslcipher_individualcipher_binding/ ciphergroupname_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of sslcipher_individualcipher_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination

http:// <netscaler-ip-address> /nitro/v1/config/sslcipher_individualcipher_binding/ ciphergroupname_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the sslcipher_individualcipher_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "sslcipher_individualcipher_binding": [ {
      "ciphername":<String_value>,
      "ciphgrpals":<String_value>,
      "cipherpriority":<Double_value>,
      "description":<String_value>,
      "ciphergroupname":<String_value>,
      "cipheroperation":<String_value>
}]}

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslcipher_individualcipher_binding

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters:

bulkbindings

http:// <netscaler-ip-address> /nitro/v1/config/sslcipher_individualcipher_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "sslcipher_individualcipher_binding": [ {
      "ciphername":<String_value>,
      "ciphgrpals":<String_value>,
      "cipherpriority":<Double_value>,
      "description":<String_value>,
      "ciphergroupname":<String_value>,
      "cipheroperation":<String_value>
}]}

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslcipher_individualcipher_binding/ ciphergroupname_value<String> ? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"sslcipher_individualcipher_binding": [ { "__count": "#no"} ] }