ADC NITRO APIs

sslpolicylabel

Configuration for SSL policy label resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
labelname <String> Read-write Name for the SSL policy label. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Cannot be changed after the policy label is created.



The following requirement applies only to the Citrix ADC CLI:

If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my label" or 'my label').
type <String> Read-write Type of policies that the policy label can contain.

Possible values = CONTROL, DATA, HTTPQUIC_CONTROL, HTTPQUIC_DATA
numpol <Double> Read-only Number of polices bound to label.
hits <Double> Read-only Number of times policy label was invoked.
policyname <String> Read-only Name of the SSL policy to bind to the policy label.
priority <Double> Read-only Specifies the priority of the policy.
gotopriorityexpression <String> Read-only Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE.
invoke <Boolean> Read-only Invoke flag.
labeltype <String> Read-only Type of policy label invocation.

Possible values = vserver, service, policylabel
invoke_labelname <String> Read-only Name of the label to invoke if the current policy rule evaluates to TRUE.
flowtype <Double> Read-only Flowtype of the bound SSL policy.
description <String> Read-only Description of the policylabel.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"sslpolicylabel":{
<b>"labelname":<String_value>,
</b><b>"type":<String_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel/ labelname_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of sslpolicylabel resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel? view=summary

Use this query-parameter to get the summary output of sslpolicylabel resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel? pagesize=#no;pageno=#no

Use this query-parameter to get the sslpolicylabel resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "sslpolicylabel": [ {
"labelname":<String_value>,
"type":<String_value>,
"numpol":<Double_value>,
"hits":<Double_value>,
"policyname":<String_value>,
"priority":<Double_value>,
"gotopriorityexpression":<String_value>,
"invoke":<Boolean_value>,
"labeltype":<String_value>,
"invoke_labelname":<String_value>,
"flowtype":<Double_value>,
"description":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel/ labelname_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel/ labelname_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel/ labelname_value<String> ? view=summary

Use this query-parameter to get the summary output of sslpolicylabel resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "sslpolicylabel": [ {
"labelname":<String_value>,
"type":<String_value>,
"numpol":<Double_value>,
"hits":<Double_value>,
"policyname":<String_value>,
"priority":<Double_value>,
"gotopriorityexpression":<String_value>,
"invoke":<Boolean_value>,
"labeltype":<String_value>,
"invoke_labelname":<String_value>,
"flowtype":<Double_value>,
"description":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslpolicylabel? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "sslpolicylabel": [ { "__count": "#no"} ] }

<!--NeedCopy-->
sslpolicylabel