ADC NITRO APIs

sslservicegroup_sslcertkey_binding

Binding object showing the sslcertkey that can be bound to sslservicegroup.

Properties

(click to see Operations )

Name Data Type Permissions Description
certkeyname <String> Read-write The name of the certificate bound to the SSL service group.
snicert <Boolean> Read-write The name of the CertKey. Use this option to bind Certkey(s) which will be used in SNI processing.
servicegroupname <String> Read-write The name of the SSL service to which the SSL policy needs to be bound.

Minimum length = 1
ca <Boolean> Read-write CA certificate.
crlcheck <String> Read-write The state of the CRL check parameter. (Mandatory/Optional).

Possible values = Mandatory, Optional
ocspcheck <String> Read-write The state of the OCSP check parameter. (Mandatory/Optional).

Possible values = Mandatory, Optional
__count <Double> Read-write count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/sslservicegroup_sslcertkey_binding HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"sslservicegroup_sslcertkey_binding":{
<b>"servicegroupname":<String_value>,
</b>"certkeyname":<String_value>,
"ca":<Boolean_value>,
"crlcheck":<String_value>,
"snicert":<Boolean_value>,
"ocspcheck":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslservicegroup_sslcertkey_binding/ servicegroupname_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/sslservicegroup_sslcertkey_binding/ servicegroupname_value<String> ? args=certkeyname: <String_value> ,ca: <Boolean_value> ,crlcheck: <String_value> ,snicert: <Boolean_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslservicegroup_sslcertkey_binding/ servicegroupname_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/sslservicegroup_sslcertkey_binding/ servicegroupname_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of sslservicegroup_sslcertkey_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/sslservicegroup_sslcertkey_binding/ servicegroupname_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the sslservicegroup_sslcertkey_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "sslservicegroup_sslcertkey_binding": [ {
"certkeyname":<String_value>,
"snicert":<Boolean_value>,
"servicegroupname":<String_value>,
"ca":<Boolean_value>,
"crlcheck":<String_value>,
"ocspcheck":<String_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslservicegroup_sslcertkey_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/sslservicegroup_sslcertkey_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "sslservicegroup_sslcertkey_binding": [ {
"certkeyname":<String_value>,
"snicert":<Boolean_value>,
"servicegroupname":<String_value>,
"ca":<Boolean_value>,
"crlcheck":<String_value>,
"ocspcheck":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/sslservicegroup_sslcertkey_binding/ servicegroupname_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"sslservicegroup_sslcertkey_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
sslservicegroup_sslcertkey_binding