ADC NITRO APIs

streamidentifier

Configuration for identifier resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name <String> Read-write The name of stream identifier.
selectorname <String> Read-write Name of the selector to use with the stream identifier.

Minimum length = 1
interval <Double> Read-write Number of minutes of data to use when calculating session statistics (number of requests, bandwidth, and response times). The interval is a moving window that keeps the most recently collected data. Older data is discarded at regular intervals.

Default value: 1

Minimum value = 1
samplecount <Double> Read-write Size of the sample from which to select a request for evaluation. The smaller the sample count, the more accurate is the statistical data. To evaluate all requests, set the sample count to 1. However, such a low setting can result in excessive consumption of memory and processing resources.

Default value: 1

Minimum value = 1

Maximum value = 65535
sort <String> Read-write Sort stored records by the specified statistics column, in descending order. Performed during data collection, the sorting enables real-time data evaluation through Citrix ADC policies (for example, compression and caching policies) that use functions such as IS_TOP(n).

Default value: REQUESTS

Possible values = REQUESTS, CONNECTIONS, RESPTIME, BANDWIDTH, RESPTIME_BREACHES, NONE
snmptrap <String> Read-write Enable/disable SNMP trap for stream identifier.

Default value: DISABLED

Possible values = ENABLED, DISABLED
appflowlog <String> Read-write Enable/disable Appflow logging for stream identifier.

Default value: DISABLED

Possible values = ENABLED, DISABLED
trackackonlypackets <String> Read-write Track ack only packets as well. This setting is applicable only when packet rate limiting is being used.

Default value: DISABLED

Possible values = ENABLED, DISABLED
tracktransactions <String> Read-write Track transactions exceeding configured threshold. Transaction tracking can be enabled for following metric: ResponseTime.

By default transaction tracking is disabled.

Default value: NONE

Possible values = RESPTIME, NONE
maxtransactionthreshold <Double> Read-write Maximum per transcation value of metric. Metric to be tracked is specified by tracktransactions attribute.

Default value: 0
mintransactionthreshold <Double> Read-write Minimum per transcation value of metric. Metric to be tracked is specified by tracktransactions attribute.

Default value: 0
acceptancethreshold <String> Read-write Non-Breaching transactions to Total transactions threshold expressed in percent.

Maximum of 6 decimal places is supported.

Default value: 0.000000

Maximum length = 10
breachthreshold <Double> Read-write Breaching transactions threshold calculated over interval.

Default value: 0
rule <String[]> Read-only Rule.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • UPDATE
  • UNSET
  • DELETE
  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"streamidentifier":{
<b>"name":<String_value>,
</b><b>"selectorname":<String_value>,
</b>"interval":<Double_value>,
"samplecount":<Double_value>,
"sort":<String_value>,
"snmptrap":<String_value>,
"appflowlog":<String_value>,
"trackackonlypackets":<String_value>,
"tracktransactions":<String_value>,
"maxtransactionthreshold":<Double_value>,
"mintransactionthreshold":<Double_value>,
"acceptancethreshold":<String_value>,
"breachthreshold":<Double_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"streamidentifier":{
<b>"name":<String_value>,
</b>"selectorname":<String_value>,
"interval":<Double_value>,
"samplecount":<Double_value>,
"sort":<String_value>,
"snmptrap":<String_value>,
"appflowlog":<String_value>,
"trackackonlypackets":<String_value>,
"tracktransactions":<String_value>,
"maxtransactionthreshold":<Double_value>,
"mintransactionthreshold":<Double_value>,
"acceptancethreshold":<String_value>,
"breachthreshold":<Double_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"streamidentifier":{
<b>"name":<String_value>,
</b>"selectorname":true,
"interval":true,
"samplecount":true,
"sort":true,
"snmptrap":true,
"appflowlog":true,
"trackackonlypackets":true,
"tracktransactions":true,
"maxtransactionthreshold":true,
"mintransactionthreshold":true,
"acceptancethreshold":true,
"breachthreshold":true
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier/ name_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of streamidentifier resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier? view=summary

Use this query-parameter to get the summary output of streamidentifier resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier? pagesize=#no;pageno=#no

Use this query-parameter to get the streamidentifier resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "streamidentifier": [ {
"name":<String_value>,
"selectorname":<String_value>,
"rule":<String[]_value>,
"interval":<Double_value>,
"samplecount":<Double_value>,
"sort":<String_value>,
"snmptrap":<String_value>,
"appflowlog":<String_value>,
"trackackonlypackets":<String_value>,
"tracktransactions":<String_value>,
"maxtransactionthreshold":<Double_value>,
"mintransactionthreshold":<Double_value>,
"acceptancethreshold":<String_value>,
"breachthreshold":<Double_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of streamidentifier resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "streamidentifier": [ {
"name":<String_value>,
"selectorname":<String_value>,
"rule":<String[]_value>,
"interval":<Double_value>,
"samplecount":<Double_value>,
"sort":<String_value>,
"snmptrap":<String_value>,
"appflowlog":<String_value>,
"trackackonlypackets":<String_value>,
"tracktransactions":<String_value>,
"maxtransactionthreshold":<Double_value>,
"mintransactionthreshold":<Double_value>,
"acceptancethreshold":<String_value>,
"breachthreshold":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/streamidentifier? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "streamidentifier": [ { "__count": "#no"} ] }

<!--NeedCopy-->
streamidentifier