ADC NITRO APIs

vpnvserver

Configuration for VPN virtual server resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name <String> Read-write Name for the Citrix Gateway virtual server. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Can be changed after the virtual server is created.



The following requirement applies only to the Citrix ADC CLI:

If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my server" or 'my server').

Minimum length = 1
servicetype <String> Read-write Protocol used by the Citrix Gateway virtual server.

Default value: SSL

Possible values = SSL, DTLS
ipv46 <String> Read-write IPv4 or IPv6 address of the Citrix Gateway virtual server. Usually a public IP address. User devices send connection requests to this IP address.

Minimum length = 1
range <Double> Read-write Range of Citrix Gateway virtual server IP addresses. The consecutively numbered range of IP addresses begins with the address specified by the IP Address parameter.

In the configuration utility, select Network VServer to enter a range.

Default value: 1

Minimum value = 1
port <Integer> Read-write TCP port on which the virtual server listens.

Range 1 - 65535

* in CLI is represented as 65535 in NITRO API
ipset <String> Read-write The list of IPv4/IPv6 addresses bound to ipset would form a part of listening service on the current vpn vserver.

Minimum length = 1
state <String> Read-write State of the virtual server. If the virtual server is disabled, requests are not processed.

Default value: ENABLED

Possible values = ENABLED, DISABLED
authentication <String> Read-write Require authentication for users connecting to Citrix Gateway.

Default value: ON

Possible values = ON, OFF
doublehop <String> Read-write Use the Citrix Gateway appliance in a double-hop configuration. A double-hop deployment provides an extra layer of security for the internal network by using three firewalls to divide the DMZ into two stages. Such a deployment can have one appliance in the DMZ and one appliance in the secure network.

Default value: DISABLED

Possible values = ENABLED, DISABLED
maxaaausers <Double> Read-write Maximum number of concurrent user sessions allowed on this virtual server. The actual number of users allowed to log on to this virtual server depends on the total number of user licenses.
icaonly <String> Read-write - When set to ON, it implies Basic mode where the user can log on using either Citrix Receiver or a browser and get access to the published apps configured at the XenApp/XenDEsktop environment pointed out by the WIHome parameter. Users are not allowed to connect using the Citrix Gateway Plug-in and end point scans cannot be configured. Number of users that can log in and access the apps are not limited by the license in this mode.



- When set to OFF, it implies Smart Access mode where the user can log on using either Citrix Receiver or a browser or a Citrix Gateway Plug-in. The admin can configure end point scans to be run on the client systems and then use the results to control access to the published apps. In this mode, the client can connect to the gateway in other client modes namely VPN and CVPN. Number of users that can log in and access the resources are limited by the CCU licenses in this mode.

Default value: OFF

Possible values = ON, OFF
icaproxysessionmigration <String> Read-write This option determines if an existing ICA Proxy session is transferred when the user logs on from another device.

Default value: OFF

Possible values = ON, OFF
dtls <String> Read-write This option starts/stops the turn service on the vserver.

Default value: ON

Possible values = ON, OFF
loginonce <String> Read-write This option enables/disables seamless SSO for this Vserver.

Default value: OFF

Possible values = ON, OFF
advancedepa <String> Read-write This option tells whether advanced EPA is enabled on this virtual server.

Default value: OFF

Possible values = ON, OFF
devicecert <String> Read-write Indicates whether device certificate check as a part of EPA is on or off.

Default value: OFF

Possible values = ON, OFF
certkeynames <String> Read-write Name of the certificate key that was bound to the corresponding SSL virtual server as the Certificate Authority for the device certificate.

Minimum length = 1

Maximum length = 127
downstateflush <String> Read-write Close existing connections when the virtual server is marked DOWN, which means the server might have timed out. Disconnecting existing connections frees resources and in certain cases speeds recovery of overloaded load balancing setups. Enable this setting on servers in which the connections can safely be closed when they are marked DOWN. Do not enable DOWN state flush on servers that must complete their transactions.

Default value: ENABLED

Possible values = ENABLED, DISABLED
listenpolicy <String> Read-write String specifying the listen policy for the Citrix Gateway virtual server. Can be either a named expression or an expression. The Citrix Gateway virtual server processes only the traffic for which the expression evaluates to true.

Default value: "none"
listenpriority <Double> Read-write Integer specifying the priority of the listen policy. A higher number specifies a lower priority. If a request matches the listen policies of more than one virtual server, the virtual server whose listen policy has the highest priority (the lowest priority number) accepts the request.

Default value: 101

Minimum value = 0

Maximum value = 100
tcpprofilename <String> Read-write Name of the TCP profile to assign to this virtual server.

Minimum length = 1

Maximum length = 127
httpprofilename <String> Read-write Name of the HTTP profile to assign to this virtual server.

Default value: "nshttp_default_strict_validation"

Minimum length = 1

Maximum length = 127
comment <String> Read-write Any comments associated with the virtual server.
appflowlog <String> Read-write Log AppFlow records that contain standard NetFlow or IPFIX information, such as time stamps for the beginning and end of a flow, packet count, and byte count. Also log records that contain application-level information, such as HTTP web addresses, HTTP request methods and response status codes, server response time, and latency.

Default value: ENABLED

Possible values = ENABLED, DISABLED
icmpvsrresponse <String> Read-write Criterion for responding to PING requests sent to this virtual server. If this parameter is set to ACTIVE, respond only if the virtual server is available. With the PASSIVE setting, respond even if the virtual server is not available.

Default value: PASSIVE

Possible values = PASSIVE, ACTIVE
rhistate <String> Read-write A host route is injected according to the setting on the virtual servers.

* If set to PASSIVE on all the virtual servers that share the IP address, the appliance always injects the hostroute.

* If set to ACTIVE on all the virtual servers that share the IP address, the appliance injects even if one virtual server is UP.

* If set to ACTIVE on some virtual servers and PASSIVE on the others, the appliance injects even if one virtual server set to ACTIVE is UP.

Default value: PASSIVE

Possible values = PASSIVE, ACTIVE
netprofile <String> Read-write The name of the network profile.

Minimum length = 1

Maximum length = 127
cginfrahomepageredirect <String> Read-write When client requests ShareFile resources and Citrix Gateway detects that the user is unauthenticated or the user session has expired, disabling this option takes the user to the originally requested ShareFile resource after authentication (instead of taking the user to the default VPN home page).

Default value: ENABLED

Possible values = ENABLED, DISABLED
maxloginattempts <Double> Read-write Maximum number of logon attempts.

Minimum value = 1

Maximum value = 255
failedlogintimeout <Double> Read-write Number of minutes an account will be locked if user exceeds maximum permissible attempts.

Minimum value = 1
l2conn <String> Read-write Use Layer 2 parameters (channel number, MAC address, and VLAN ID) in addition to the 4-tuple (<source IP>:<source port>::<destination IP>:<destination port>) that is used to identify a connection. Allows multiple TCP and non-TCP connections with the same 4-tuple to coexist on the Citrix ADC.

Possible values = ON, OFF
deploymenttype <String> Read-write .

Default value: 5

Possible values = NONE, ICA_WEBINTERFACE, ICA_STOREFRONT, MOBILITY
rdpserverprofilename <String> Read-write Name of the RDP server profile associated with the vserver.

Minimum length = 1

Maximum length = 31
windowsepapluginupgrade <String> Read-write Option to set plugin upgrade behaviour for Win.

Possible values = Always, Essential, Never
linuxepapluginupgrade <String> Read-write Option to set plugin upgrade behaviour for Linux.

Possible values = Always, Essential, Never
macepapluginupgrade <String> Read-write Option to set plugin upgrade behaviour for Mac.

Possible values = Always, Essential, Never
logoutonsmartcardremoval <String> Read-write Option to VPN plugin behavior when smartcard or its reader is removed.

Default value: OFF

Possible values = ON, OFF
userdomains <String> Read-write List of user domains specified as comma seperated value.
authnprofile <String> Read-write Authentication Profile entity on virtual server. This entity can be used to offload authentication to AAA vserver for multi-factor(nFactor) authentication.
vserverfqdn <String> Read-write Fully qualified domain name for a VPN virtual server. This is used during StoreFront configuration generation.
pcoipvserverprofilename <String> Read-write Name of the PCoIP vserver profile associated with the vserver.

Minimum length = 1

Maximum length = 31
samesite <String> Read-write SameSite attribute value for Cookies generated in VPN context. This attribute value will be appended only for the cookies which are specified in the builtin patset ns_cookies_samesite.

Possible values = None, LAX, STRICT
newname <String> Read-write New name for the Citrix Gateway virtual server. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters.



The following requirement applies only to the Citrix ADC CLI:

If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my server" or 'my server').

Minimum length = 1
ip <String> Read-only The Virtual IP address of the VPN virtual server.
value <String> Read-only Indicates whether or not the certificate is bound or if SSL offload is disabled.

Possible values = Certkey/Certkeybundle not bound, SSL feature disabled
type <String> Read-only The type of virtual server; for example, CONTENT based or ADDRESS based.

Possible values = CONTENT, ADDRESS
curstate <String> Read-only The current state of the virtual server, as UP, DOWN, BUSY, and so on.

Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
status <Integer> Read-only Whether or not this virtual server responds to ARPs and whether or not round-robin selection is temporarily in effect.
cachetype <String> Read-only Virtual server cache type. The options are: TRANSPARENT, REVERSE, and FORWARD.

Possible values = TRANSPARENT, REVERSE, FORWARD
redirect <String> Read-only The cache redirect policy.

The valid redirect policies are:

l. CACHE - Directs all requests to the cache.

2. POLICY - Applies cache redirection policy to determine whether the request should be directed to the cache or origin. This is the default setting.

3. ORIGIN - Directs all requests to the origin server.

Possible values = CACHE, POLICY, ORIGIN
precedence <String> Read-only This argument is used only when configuring content switching on the specified virtual server. This is applicable only

if both the URL and RULE-based policies have been configured on the same virtual server.

It specifies the type of policy (URL or RULE) that takes precedence on the content switching virtual server. The default setting is RULE.

l URL - In this case, the incoming request is matched against the URL-based policies before the rule-based policies.

l RULE - In this case, the incoming request is matched against the rule-based policies before the URL-based policies.

For all URL-based policies, the precedence hierarchy is:

1. Domain and exact URL

2. Domain, prefix, and suffix

3. Domain and suffix

4. Domain and prefix

5. Domain only

6. Exact URL

7. Prefix and suffix

8. Suffix only

9. Prefix only

10. Default.

Possible values = RULE, URL
redirecturl <String> Read-only The URL where traffic is redirected if the virtual server in system becomes unavailable. WARNING! Make sure that the domain you specify in the URL does not match the domain specified in the -d domainName argument of the ###add cs policy### command. If the same domain is specified in both arguments, the request will be continuously redirected to the same unavailable virtual server in the system. If so, the user may not get the requested content.
curaaausers <Double> Read-only The number of current users logged on to this virtual server.
curtotalusers <Double> Read-only The total number of current users connected through this virtual server.
domain <String> Read-only The domain name of the server for which a service needs to be added. If the IP address has been specified, the domain name does not need to be specified.
rule <String> Read-only The name of the rule, or expression, if any, that policy for the VPN server is to use. Rules are combinations of expressions. Expressions are simple conditions, such as a test for equality, applied to operands, such as a URL string or an IP address. Expression syntax is described in the Installation and Configuration Guide. The default rule is true.

Minimum length = 1
servicename <String> Read-only The name of the service, if any, to which the virtual server policy is bound.
weight <Double> Read-only Weight for this service, if any. This weight is used when the system performs load balancing, giving greater priority to a specific service. It is useful when the services bound to a virtual server are of different capacity.
cachevserver <String> Read-only The name of the default target cache virtual server, if any, to which requests are redirected.
backupvserver <String> Read-only The name of the backup VPN virtual server for this VPN virtual server.
clttimeout <Double> Read-only The idle time, if any, in seconds after which the client connection is terminated.
somethod <String> Read-only VPN client applications are allocated from a block of intranet IP addresses.

That block may be exhausted after a certain number of connections. This switch specifies the

method used to determine whether or not a new connection will spill over, or exhaust, the allocated block of

intranet IP addresses for that application. Possible values are CONNECTION or DYNAMICCONNECTION.

CONNECTION means that a static integer value is the hard limit for the spillover threshold. The spillover

threshold is described below. DYNAMICCONNECTION means that the spillover threshold is set according to

the maximum number of connections defined for the VPN virtual server.

Possible values = CONNECTION, DYNAMICCONNECTION, BANDWIDTH, HEALTH, NONE
sothreshold <Double> Read-only VPN client applications are allocated from a block of intranet IP addresses.

That block may be exhausted after a certain number of connections.

The value of this option is the number of client connections after which the mapped IP address is used

as the client source IP address instead of an address from the allocated block of intranet IP addresses.
sopersistence <String> Read-only Whether or not cookie-based site persistance is enabled for this VPN vserver. Possible values are 'ConnectionProxy', HTTPRedirect, or NONE.

Possible values = ENABLED, DISABLED
sopersistencetimeout <Double> Read-only The timeout, if any, for cookie-based site persistance of this VPN vserver.
usemip <String> Read-only Deprecated. See 'map' below.

Possible values = ENABLED, DISABLED
map <String> Read-only Whether or not mapped IP addresses are ON or OFF. Mapped IP addresses are source IP addresses

for the virtual servers running on the Citrix ADC. Mapped IP addresses are used by the system to connect to the backend servers.

Possible values = ON, OFF
bindpoint <String> Read-only Bindpoint to which the policy is bound.

Possible values = REQUEST, RESPONSE, ICA_REQUEST, OTHERTCP_REQUEST, AAA_REQUEST, AAA_RESPONSE
disableprimaryondown <String> Read-only Tells whether traffic will continue reaching backup virtual servers even after the primary virtual server comes UP from DOWN state.

Possible values = ENABLED, DISABLED
secondary <Boolean> Read-only Binds the authentication policy as the secondary policy to use in a two-factor configuration. A user must then authenticate not only via a primary authentication method but also via a secondary authentication method. User groups are aggregated across both. The user name must be exactly the same for both authentication methods, but they can require different passwords.
groupextraction <Boolean> Read-only Binds the authentication policy to a tertiary chain which will be used only for group extraction. The user will not authenticate against this server, and this will only be called if primary and/or secondary authentication has succeeded.
epaprofileoptional <Boolean> Read-only Mark the EPA profile optional for preauthentication EPA profile. User would be shown a logon page even if the EPA profile fails to evaluate.
ngname <String> Read-only Node group devno to which this authentication virtual sever belongs.
csvserver <String> Read-only Name of the CS vserver to which the VPN vserver is bound.
nodefaultbindings <String> Read-only to determine if the configuration will have default ssl CIPHER and ECC curve bindings.

Default value: NO

Possible values = YES, NO
response <String> Read-only .
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • UPDATE
  • UNSET
  • ENABLE
  • DISABLE
  • GET (ALL)
  • GET
  • COUNT
  • RENAME
  • CHECK

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vpnvserver":{
<b>"name":<String_value>,
</b><b>"servicetype":<String_value>,
</b>"ipv46":<String_value>,
"range":<Double_value>,
"port":<Integer_value>,
"ipset":<String_value>,
"state":<String_value>,
"authentication":<String_value>,
"doublehop":<String_value>,
"maxaaausers":<Double_value>,
"icaonly":<String_value>,
"icaproxysessionmigration":<String_value>,
"dtls":<String_value>,
"loginonce":<String_value>,
"advancedepa":<String_value>,
"devicecert":<String_value>,
"certkeynames":<String_value>,
"downstateflush":<String_value>,
"listenpolicy":<String_value>,
"listenpriority":<Double_value>,
"tcpprofilename":<String_value>,
"httpprofilename":<String_value>,
"comment":<String_value>,
"appflowlog":<String_value>,
"icmpvsrresponse":<String_value>,
"rhistate":<String_value>,
"netprofile":<String_value>,
"cginfrahomepageredirect":<String_value>,
"maxloginattempts":<Double_value>,
"failedlogintimeout":<Double_value>,
"l2conn":<String_value>,
"deploymenttype":<String_value>,
"rdpserverprofilename":<String_value>,
"windowsepapluginupgrade":<String_value>,
"linuxepapluginupgrade":<String_value>,
"macepapluginupgrade":<String_value>,
"logoutonsmartcardremoval":<String_value>,
"userdomains":<String_value>,
"authnprofile":<String_value>,
"vserverfqdn":<String_value>,
"pcoipvserverprofilename":<String_value>,
"samesite":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver/ name_value<String> HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vpnvserver":{
<b>"name":<String_value>,
</b>"ipv46":<String_value>,
"ipset":<String_value>,
"authentication":<String_value>,
"doublehop":<String_value>,
"icaonly":<String_value>,
"icaproxysessionmigration":<String_value>,
"dtls":<String_value>,
"loginonce":<String_value>,
"advancedepa":<String_value>,
"devicecert":<String_value>,
"certkeynames":<String_value>,
"maxaaausers":<Double_value>,
"downstateflush":<String_value>,
"listenpolicy":<String_value>,
"listenpriority":<Double_value>,
"tcpprofilename":<String_value>,
"httpprofilename":<String_value>,
"comment":<String_value>,
"appflowlog":<String_value>,
"icmpvsrresponse":<String_value>,
"rhistate":<String_value>,
"netprofile":<String_value>,
"cginfrahomepageredirect":<String_value>,
"maxloginattempts":<Double_value>,
"rdpserverprofilename":<String_value>,
"failedlogintimeout":<Double_value>,
"l2conn":<String_value>,
"windowsepapluginupgrade":<String_value>,
"macepapluginupgrade":<String_value>,
"linuxepapluginupgrade":<String_value>,
"logoutonsmartcardremoval":<String_value>,
"userdomains":<String_value>,
"authnprofile":<String_value>,
"vserverfqdn":<String_value>,
"pcoipvserverprofilename":<String_value>,
"samesite":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? action=unset HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vpnvserver":{
<b>"name":<String_value>,
</b>"ipset":true,
"authentication":true,
"doublehop":true,
"icaonly":true,
"icaproxysessionmigration":true,
"dtls":true,
"loginonce":true,
"advancedepa":true,
"devicecert":true,
"certkeynames":true,
"maxaaausers":true,
"downstateflush":true,
"listenpolicy":true,
"listenpriority":true,
"tcpprofilename":true,
"httpprofilename":true,
"comment":true,
"appflowlog":true,
"icmpvsrresponse":true,
"rhistate":true,
"netprofile":true,
"cginfrahomepageredirect":true,
"maxloginattempts":true,
"rdpserverprofilename":true,
"l2conn":true,
"windowsepapluginupgrade":true,
"macepapluginupgrade":true,
"linuxepapluginupgrade":true,
"logoutonsmartcardremoval":true,
"userdomains":true,
"authnprofile":true,
"vserverfqdn":true,
"pcoipvserverprofilename":true,
"samesite":true
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

enable

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? action=enable HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vpnvserver":{
<b>"name":<String_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

disable

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? action=disable HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vpnvserver":{
<b>"name":<String_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

rename

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? action=rename HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vpnvserver":{
<b>"name":<String_value>,
</b><b>"newname":<String_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

check

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? action=check HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vpnvserver":{
<b>"name":<String_value>
</b>}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Payload:

{ "vpnvserver": [ {
<b>"name":<String_value>,
</b>"response":<String_value>

}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of vpnvserver resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? view=summary

Use this query-parameter to get the summary output of vpnvserver resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? pagesize=#no;pageno=#no

Use this query-parameter to get the vpnvserver resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "vpnvserver": [ {
"name":<String_value>,
"ip":<String_value>,
"ipv46":<String_value>,
"value":<String_value>,
"port":<Integer_value>,
"range":<Double_value>,
"ipset":<String_value>,
"servicetype":<String_value>,
"type":<String_value>,
"curstate":<String_value>,
"status":<Integer_value>,
"cachetype":<String_value>,
"redirect":<String_value>,
"precedence":<String_value>,
"redirecturl":<String_value>,
"authentication":<String_value>,
"doublehop":<String_value>,
"icaonly":<String_value>,
"icaproxysessionmigration":<String_value>,
"dtls":<String_value>,
"loginonce":<String_value>,
"advancedepa":<String_value>,
"devicecert":<String_value>,
"certkeynames":<String_value>,
"maxaaausers":<Double_value>,
"curaaausers":<Double_value>,
"curtotalusers":<Double_value>,
"domain":<String_value>,
"rule":<String_value>,
"policyname":<String_value>,
"servicename":<String_value>,
"weight":<Double_value>,
"cachevserver":<String_value>,
"backupvserver":<String_value>,
"clttimeout":<Double_value>,
"somethod":<String_value>,
"sothreshold":<Double_value>,
"sopersistence":<String_value>,
"sopersistencetimeout":<Double_value>,
"usemip":<String_value>,
"map":<String_value>,
"downstateflush":<String_value>,
"bindpoint":<String_value>,
"disableprimaryondown":<String_value>,
"listenpolicy":<String_value>,
"listenpriority":<Double_value>,
"tcpprofilename":<String_value>,
"httpprofilename":<String_value>,
"comment":<String_value>,
"appflowlog":<String_value>,
"icmpvsrresponse":<String_value>,
"rhistate":<String_value>,
"netprofile":<String_value>,
"cginfrahomepageredirect":<String_value>,
"maxloginattempts":<Double_value>,
"failedlogintimeout":<Double_value>,
"secondary":<Boolean_value>,
"groupextraction":<Boolean_value>,
"deploymenttype":<String_value>,
"windowsepapluginupgrade":<String_value>,
"linuxepapluginupgrade":<String_value>,
"macepapluginupgrade":<String_value>,
"logoutonsmartcardremoval":<String_value>,
"epaprofileoptional":<Boolean_value>,
"rdpserverprofilename":<String_value>,
"ngname":<String_value>,
"state":<String_value>,
"l2conn":<String_value>,
"userdomains":<String_value>,
"csvserver":<String_value>,
"authnprofile":<String_value>,
"vserverfqdn":<String_value>,
"pcoipvserverprofilename":<String_value>,
"nodefaultbindings":<String_value>,
"samesite":<String_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver/ name_value<String> Query-parameters: attrs http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of vpnvserver resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "vpnvserver": [ {
"name":<String_value>,
"ip":<String_value>,
"ipv46":<String_value>,
"value":<String_value>,
"port":<Integer_value>,
"range":<Double_value>,
"ipset":<String_value>,
"servicetype":<String_value>,
"type":<String_value>,
"curstate":<String_value>,
"status":<Integer_value>,
"cachetype":<String_value>,
"redirect":<String_value>,
"precedence":<String_value>,
"redirecturl":<String_value>,
"authentication":<String_value>,
"doublehop":<String_value>,
"icaonly":<String_value>,
"icaproxysessionmigration":<String_value>,
"dtls":<String_value>,
"loginonce":<String_value>,
"advancedepa":<String_value>,
"devicecert":<String_value>,
"certkeynames":<String_value>,
"maxaaausers":<Double_value>,
"curaaausers":<Double_value>,
"curtotalusers":<Double_value>,
"domain":<String_value>,
"rule":<String_value>,
"policyname":<String_value>,
"servicename":<String_value>,
"weight":<Double_value>,
"cachevserver":<String_value>,
"backupvserver":<String_value>,
"clttimeout":<Double_value>,
"somethod":<String_value>,
"sothreshold":<Double_value>,
"sopersistence":<String_value>,
"sopersistencetimeout":<Double_value>,
"usemip":<String_value>,
"map":<String_value>,
"downstateflush":<String_value>,
"bindpoint":<String_value>,
"disableprimaryondown":<String_value>,
"listenpolicy":<String_value>,
"listenpriority":<Double_value>,
"tcpprofilename":<String_value>,
"httpprofilename":<String_value>,
"comment":<String_value>,
"appflowlog":<String_value>,
"icmpvsrresponse":<String_value>,
"rhistate":<String_value>,
"netprofile":<String_value>,
"cginfrahomepageredirect":<String_value>,
"maxloginattempts":<Double_value>,
"failedlogintimeout":<Double_value>,
"secondary":<Boolean_value>,
"groupextraction":<Boolean_value>,
"deploymenttype":<String_value>,
"windowsepapluginupgrade":<String_value>,
"linuxepapluginupgrade":<String_value>,
"macepapluginupgrade":<String_value>,
"logoutonsmartcardremoval":<String_value>,
"epaprofileoptional":<Boolean_value>,
"rdpserverprofilename":<String_value>,
"ngname":<String_value>,
"state":<String_value>,
"l2conn":<String_value>,
"userdomains":<String_value>,
"csvserver":<String_value>,
"authnprofile":<String_value>,
"vserverfqdn":<String_value>,
"pcoipvserverprofilename":<String_value>,
"nodefaultbindings":<String_value>,
"samesite":<String_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "vpnvserver": [ { "__count": "#no"} ] }

<!--NeedCopy-->
vpnvserver