ADC NITRO APIs

vpnvserver_vpnsessionpolicy_binding

Binding object showing the vpnsessionpolicy that can be bound to vpnvserver.

Properties

(click to see Operations )

Name Data Type Permissions Description
priority <Double> Read-write Integer specifying the policy's priority. The lower the number, the higher the priority. Policies are evaluated in the order of their priority numbers. Maximum value for default syntax policies is 2147483647 and for classic policies is 64000.

Minimum value = 0

Maximum value = 2147483647
gotopriorityexpression <String> Read-write Applicable only to advance vpn session policy. Expression or other value specifying the next policy to evaluate if the current policy evaluates to TRUE. Specify one of the following values: - NEXT - Evaluate the policy with the next higher priority number. - END - End policy evaluation. - An expression that evaluates to a number. If you specify an expression, the number to which it evaluates determines the next policy to evaluate, as follows: - If the expression evaluates to a higher numbered priority, the policy with that priority is evaluated next. - If the expression evaluates to the priority of the current policy, the policy with the next higher numbered priority is evaluated next. - If the expression evaluates to a number that is larger than the largest numbered priority, policy evaluation ends. An UNDEF event is triggered if: - The expression is invalid. - The expression evaluates to a priority number that is numerically lower than the current policy's priority. - The expression evaluates to a priority number that is between the current policy's priority number (say, 30) and the highest priority number (say, 100), but does not match any configured priority number (for example, the expression evaluates to the number 85). This example assumes that the priority number increments by 10 for every successive policy, and therefore a priority number of 85 does not exist in the policy label.
policy <String> Read-write The name of the policy, if any, bound to the VPN virtual server.
groupextraction <Boolean> Read-write Binds the authentication policy to a tertiary chain which will be used only for group extraction. The user will not authenticate against this server, and this will only be called if primary and/or secondary authentication has succeeded.
name <String> Read-write Name of the virtual server.

Minimum length = 1
secondary <Boolean> Read-write Binds the authentication policy as the secondary policy to use in a two-factor configuration. A user must then authenticate not only via a primary authentication method but also via a secondary authentication method. User groups are aggregated across both. The user name must be exactly the same for both authentication methods, but they can require different passwords.
bindpoint <String> Read-write Bind point to which to bind the policy. Applies only to rewrite and cache policies. If you do not set this parameter, the policy is bound to REQ_DEFAULT or RES_DEFAULT, depending on whether the policy rule is a response-time or a request-time expression.

Possible values = REQUEST, RESPONSE, ICA_REQUEST, OTHERTCP_REQUEST, AAA_REQUEST, AAA_RESPONSE
acttype <Double> Read-only .
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • ADD
  • DELETE
  • GET
  • GET (ALL)
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

add

URL: http:// <netscaler-ip-address /nitro/v1/config/vpnvserver_vpnsessionpolicy_binding HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"vpnvserver_vpnsessionpolicy_binding":{
<b>"name":<String_value>,
</b>"policy":<String_value>,
"priority":<Double_value>,
"secondary":<Boolean_value>,
"groupextraction":<Boolean_value>,
"gotopriorityexpression":<String_value>,
"bindpoint":<String_value>
}}

<!--NeedCopy-->

Response: HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver_vpnsessionpolicy_binding/ name_value<String> Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver_vpnsessionpolicy_binding/ name_value<String> ? args=policy: <String_value> ,secondary: <Boolean_value> ,groupextraction: <Boolean_value> ,bindpoint: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver_vpnsessionpolicy_binding/ name_value<String> Query-parameters: filter http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver_vpnsessionpolicy_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of vpnvserver_vpnsessionpolicy_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver_vpnsessionpolicy_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the vpnvserver_vpnsessionpolicy_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "vpnvserver_vpnsessionpolicy_binding": [ {
"priority":<Double_value>,
"gotopriorityexpression":<String_value>,
"policy":<String_value>,
"groupextraction":<Boolean_value>,
"name":<String_value>,
"secondary":<Boolean_value>,
"bindpoint":<String_value>,
"acttype":<Double_value>
}]}

<!--NeedCopy-->

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver_vpnsessionpolicy_binding HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters: bulkbindings http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver_vpnsessionpolicy_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "vpnvserver_vpnsessionpolicy_binding": [ {
"priority":<Double_value>,
"gotopriorityexpression":<String_value>,
"policy":<String_value>,
"groupextraction":<Boolean_value>,
"name":<String_value>,
"secondary":<Boolean_value>,
"bindpoint":<String_value>,
"acttype":<Double_value>
}]}

<!--NeedCopy-->

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/vpnvserver_vpnsessionpolicy_binding/ name_value<String> ? count=yes HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"vpnvserver_vpnsessionpolicy_binding": [ { "__count": "#no"} ] }

<!--NeedCopy-->
vpnvserver_vpnsessionpolicy_binding