Skip to content

CFE ERRORS

CFE ERRORS

Error CodeError Code(Decimal)Error Code(Hex)Error Message
NSERR_NOSUCHIOCTL11840x4a0Command not implemented on server
NSERR_NOTARGETS11850x4a1No configured targets
NSERR_CANTRECOVER11860x4a2Configuration possibly inconsistent. Please check with the \\"show configstatus\\" command or reboot.
NSERR_IGNOREDIOCTL11870x4a3The command was ignored.
NSERR_REMOTECLOSE11880x4a4The remote side closed the connection.
NSERR_INVALID_TARGET11890x4a5The specified target does not exist
NSERR_FILE_ERROR11900x4a6File operation failed
NSERR_COMMENT_DROPPED11910x4a7Failed to retain all comments
NSERR_AGGREQ_TIMEOUT11920x4a8Request to Aggregator timed out
NSERR_AGGREAD11930x4a9Failed to read data from Aggregator
NSERR_RPC_CMD_DUP11940x4aaFound unexpected RPC duplicate command
NSERR_RPC_CMD_NONDUP11950x4abFound unexpected RPC command
NSERR_CFE_PE_COMM11960x4acCommunication error with the packet engine
NSERR_AGG_CONFAIL11970x4adFailed to connect to the aggregator
NSERR_CFE_PE_TIMOUT11980x4aeNo response from the packet engine
NSERR_AGG_INVALIDRESPONSE11990x4afInvalid response from the aggregator
NSERR_NONTPSVR12000x4b0Cannot enable ntpd when there is no ntp server configured
NSERR_AGG_SENDFAIL12010x4b1Failed to send to aggregator
NSERR_CFE_ASLEARN_COMM12020x4b2Communication error with aslearn
NSERR_READONLY_SESSION12030x4b3Session is read-only; connect to the Cluster IP address to modify the configuration
NSERR_WRONG_PE_STATE12040x4b4The packet engine is in the wrong state to receive this command
NSERR_CFE_VALIDATION_FAILED12050x4b5Config validation failed
NSERR_XPATH_INTERNAL12060x4b6XPATH Internal Error
NSERR_CFE_CALLHOME_COMM12070x4b7Communication error with callhome
NSERR_BIND_NOENT12080x4b8No such bind resource
NSERR_PPNETMASK12090x4b9Netmask length 31 supports only point to point communications
NSERR_CFE_CLFSYNCD_COMM12100X4baCommunication error with cluster filesync server
NSERR_DB_INTERNAL12110x4bbConfig DB Internal Error
NSERR_MIPDEPRECATED12120x4bcMIP is deprecated. Please use SNIP
NSERR_KEKEXISTS12130x4bdCannot create KEK. KEK already exists.
NSERR_VAL_INCONSITENT12140x4beValidation inconsistent between PE and configd.
NSERR_CALLHOME_LOW_HB_CUSTOM_INTERVAL12150x4bfSetting a low heartbeat interval will result in frequent CallHome uploads
NSERR_INVALIDTIMEOUT12190x4c3Invalid Timeout, it cannot be beyond admin configured value and should be between in the range of 300-86400