Skip to content

INTF ERRORS

INTF ERRORS

Error CodeError Code(Decimal)Error Code(Hex)Error Message
NSERR_1GSFPSPEEDLIMIT39680xf801G SFPs are restricted to speed 1000 or AUTO only
NSERR_1GSFPDUPLEXLIMIT39690xf811G SFPs are restricted to duplex FULL or AUTO only
NSERR_1GSPEEDLIMIT39700xf821G port can not be configured as 10G speed
NSERR_1GDUPLEXLIMIT39710xf831G port can not be configured as HALF duplex
NSERR_10GSPEEDLIMIT39720xf8410G ports on this platform can only be configured as speed 1G, 10G or AUTO only
NSERR_10GDUPLEXLIMIT39730xf8510G ports on this platform can only be configured as duplex FULL or AUTO only
NSERR_10GAUTONEGLIMIT39740xf8610G ports on this platform do not support AUTONEG
NSERR_10GSPEEDONLY39750xf8710G ports on this platform are restricted to speed 10000 or AUTO only
NSERR_FULLDUPLEXONLY39760xf88These ports do not support HALF duplex mode
NSERR_AUTOINVALSPEED39770xf89Static CLAG does not support speed as AUTO
NSERR_CLAGSPEEDREQ39780xf8aStatic CLAG explicitly requires speed to be configured other than AUTO
NSERR_THROUGHPUTLIMIT39790xf8bThroughput limit error. Possible values: 1G port - 1000Mbps, 10G port - 10000Mbps, 40G port - 40000Mbps, Link Aggregation - 80000Mbps
NSERR_BANDWIDTHLIMIT39800xf8cBandwidth limit error. Possible values: 1G port - 1000Mbps, 10G port - 10000Mbps, 40G port - 40000Mbps, Link Aggregation - 80000Mbps
NSERR_10GDAC_SPEEDLIMIT39810xf8dDAC port speed must be configured as 10G or AUTO
NSERR_VIF_LACP_CAUTION39820xf8eEnsure that the physical interface is not shared with any other VMs.
NSERR_LA_SLAVE_LIMIT39830xf8fTrying to bind more interfaces than allowed limit
NSERR_SLAVE_MTU_MISMATCH39870xf93Interface MTU should be same as Channel MTU.
NSERR_BKPLANE_MTU_MISMATCH39880xf94Interface MTU should be default or same as Backplane MTU.
NSERR_MTU_NOTALLOWED39890xf95MTU change is not allowed on this interface.
NSERR_BACKPLANE_MTU_LIMIT39900xf96Backplane Interface, Minimum user configured value for MTU is 1579.
NSERR_INTERFACE_SLAVE_MTU_LIMIT39910xf97Interface is a part of channel, MTU change is not allowed.
NSERR_CHANNEL_RESTRICT4470x1BFLA channel configuration on VPX running on SDX should be done only from Service VM
NSERR_PTP_CLUS_L339920xf98Cluster INC Mode Enabled, PTP state change is not allowed.
NSERR_40GDUPLEXLIMIT39930xf9940G ports on this platform can only be configured as duplex FULL or AUTO only
NSERR_40GSPEEDONLY39940xf9a40G ports on this platform are restricted to speed 40000 or AUTO only
NSERR_LRSET_FC_NOT_ALLOWED39960xf9cFlow Controle settings not allowed for link redundant set interface
NSERR_LRSET_LACP_SET_NOT_ALLOWED39970xf9dDynamic LA(LACP) settings are not allowed for link redundant set interface
NSERR_LRSET_LLDPSET_NOT_ALLOWED39980xf9eLLDP settings are not allowed for link redundant set interface
NSERR_LRSET_SPEED_NOT_ALLOWED39990xf9fspeed setting not allowed for link redundant set interface
NSERR_LRSET_PRIORITY_NOT_ALLOWED40260xfbalrset priority not allowed for link redundant set master interface
NSERR_LRSET_THROUGHPUT_NOT_ALLOWED40270xfbbthroughput setting not allowed for link redundant set master interface
NSERR_LRSET_BW_SET_NOT_ALLOWED40280xfbcBandwidth settings are not allowed for link redundant set interface
NSERR_LRSET_LAG_TYPE_NOT_ALLOWED40290xfbdLagtype setting not allowed for link redundant set interface
NSERR_LRSET_DUPLEX_NOT_ALLOWED40300xfbeDuplex setting not allowed for link redundant set interface
NSERR_LRSET_AUTO_NEG_NOT_ALLOWED40310xfbfDisabling autonegotiation not allowed for link redundant set interface
NSERR_JF_ESX_VERSION_SUPPORT40700xfe6Jumbo Frames are supported on ESX 5.5 version and onward
NSERR_TP_SETTINGS_NOT_ALLOWED33850xd39Trunk Port settings on this interface is not supported
NSERR_LACP_SETTINGS_ON_TP_NOT_ALLOWED33860xd3aLACP settings on Trunk Port is not allowed
NSERR_IP6_ADDRESS_SETTING_FAILED33870xd3bIPv6 Address can not be added because MTA table got exhausted
NSERR_50GSPEEDLIMIT33880xd3c50G ports on this platform can only be configured as speed 10G, 25G, 40G, 50G or AUTO
NSERR_100GSPEEDLIMIT33890xd3d100G ports on this platform can only be configured as speed 10G, 25G, 40G, 50G, 100G or AUTO