ADC NITRO APIs

inatsession

Statistics for stateful INAT resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
name <String> Read-write INAT name.

Minimum length = 1
clearstats <String> Read-write Clear the statsistics / counters.

Possible values = basic, full
globalinathits <Double> Read-only Total INAT Session hits
globalinathitsrate <Double> Read-only Rate (/s) counter for globalinathits
globalinatcursessions <Double> Read-only Total INAT current sessions
globalinatcursessionsrate <Double> Read-only Rate (/s) counter for globalinatcursessions
globalinatreceivebytes <Double> Read-only Total INAT Received Bytes
globalinatreceivebytesrate <Double> Read-only Rate (/s) counter for globalinatreceivebytes
globalinattotsentbytes <Double> Read-only Total INAT Sent Bytes
globalinatsentbytesrate <Double> Read-only Rate (/s) counter for globalinattotsentbytes
globalinatpktreceived <Double> Read-only Total INAT Packets Received
globalinatpktreceivedrate <Double> Read-only Rate (/s) counter for globalinatpktreceived
globalinatpktsent <Double> Read-only Total INAT Packets Sent
globalinatpktsentrate <Double> Read-only Rate (/s) counter for globalinatpktsent
inattothits <Double> Read-only INAT total sessions
inathitsrate <Double> Read-only Rate (/s) counter for inattothits
inatcursessions <Double> Read-only INAT current sessions
inatcursessionsrate <Double> Read-only Rate (/s) counter for inatcursessions
inattotreceivebytes <Double> Read-only INAT total Received Bytes
inatreceivebytesrate <Double> Read-only Rate (/s) counter for inattotreceivebytes
inattotsentbytes <Double> Read-only INAT total Sent Bytes
inatsentbytesrate <Double> Read-only Rate (/s) counter for inattotsentbytes
inattotpktreceived <Double> Read-only INAT total Packets Received
inatpktreceivedrate <Double> Read-only Rate (/s) counter for inattotpktreceived
inattotpktsent <Double> Read-only INAT total Packets Sent
inatpktsentrate <Double> Read-only Rate (/s) counter for inattotpktsent

Operations

(click to see Properties )

  • GET (ALL)
  • GET

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

*Note: * Mandatory parameters are marked in red and placeholder content is marked in green

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/stat/inatsession Query-parameters: args http:// <netscaler-ip-address> /nitro/v1/stat/inatsession? args=name: <String_value> ,detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value>

Use this query-parameter to get inatsession resources based on additional properties.

attrs http:// <netscaler-ip-address> /nitro/v1/stat/inatsession? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "inatsession": [ {
"name":<String_value>,
"globalinatreceivebytes":<Double_value>,
"globalinatcursessions":<Double_value>,
"inattotsentbytes":<Double_value>,
"globalinatpktsent":<Double_value>,
"inatreceivebytesrate":<Double_value>,
"globalinatsentbytesrate":<Double_value>,
"globalinatcursessionsrate":<Double_value>,
"inathitsrate":<Double_value>,
"inattotreceivebytes":<Double_value>,
"inatcursessionsrate":<Double_value>,
"globalinatreceivebytesrate":<Double_value>,
"globalinatpktsentrate":<Double_value>,
"inatcursessions":<Double_value>,
"inatsentbytesrate":<Double_value>,
"globalinattotsentbytes":<Double_value>,
"globalinathits":<Double_value>,
"globalinathitsrate":<Double_value>,
"inatpktsentrate":<Double_value>,
"globalinatpktreceived":<Double_value>,
"globalinatpktreceivedrate":<Double_value>,
"inattotpktreceived":<Double_value>,
"inattothits":<Double_value>,
"inattotpktsent":<Double_value>,
"inatpktreceivedrate":<Double_value>
}]}

<!--NeedCopy-->

get

URL: http:// <netscaler-ip-address> /nitro/v1/stat/inatsession/ name_value><String> HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response: HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "inatsession": [ {
"name":<String_value>,
"globalinatreceivebytes":<Double_value>,
"globalinatcursessions":<Double_value>,
"inattotsentbytes":<Double_value>,
"globalinatpktsent":<Double_value>,
"inatreceivebytesrate":<Double_value>,
"globalinatsentbytesrate":<Double_value>,
"globalinatcursessionsrate":<Double_value>,
"inathitsrate":<Double_value>,
"inattotreceivebytes":<Double_value>,
"inatcursessionsrate":<Double_value>,
"globalinatreceivebytesrate":<Double_value>,
"globalinatpktsentrate":<Double_value>,
"inatcursessions":<Double_value>,
"inatsentbytesrate":<Double_value>,
"globalinattotsentbytes":<Double_value>,
"globalinathits":<Double_value>,
"globalinathitsrate":<Double_value>,
"inatpktsentrate":<Double_value>,
"globalinatpktreceived":<Double_value>,
"globalinatpktreceivedrate":<Double_value>,
"inattotpktreceived":<Double_value>,
"inattothits":<Double_value>,
"inattotpktsent":<Double_value>,
"inatpktreceivedrate":<Double_value>
}]}

<!--NeedCopy-->
inatsession