Skip to content

nsacl6

Statistics for ACL6 entry resource.

Properties

(click to see Operations)

NameData TypePermissionsDescription
acl6name<String>Read-writeName of the ACL6 rule whose statistics you want the Citrix ADC to display.
Minimum length = 1
clearstats<String>Read-writeClear the statsistics / counters.
Possible values = basic, full
acl6totpktsbridged<Double>Read-onlyPackets matching a bridge IPv6 ACL, which is in transparent mode and bypasses service processing.
acl6pktsbridgedrate<Double>Read-onlyRate (/s) counter for acl6totpktsbridged
acl6totpktsdenied<Double>Read-onlyPackets dropped because they match IPv6 ACLs with processing mode set to DENY.
acl6pktsdeniedrate<Double>Read-onlyRate (/s) counter for acl6totpktsdenied
acl6totpktsallowed<Double>Read-onlyPackets matching IPv6 ACLs with processing mode set to ALLOW. Citrix ADC processes these packets.
acl6pktsallowedrate<Double>Read-onlyRate (/s) counter for acl6totpktsallowed
acl6totpktsnat<Double>Read-onlyPackets matching a NAT ACL6, resulting in a NAT session.
acl6pktsnatrate<Double>Read-onlyRate (/s) counter for acl6totpktsnat
acl6tothits<Double>Read-onlyPackets matching an IPv6 ACL.
acl6hitsrate<Double>Read-onlyRate (/s) counter for acl6tothits
acl6totmisses<Double>Read-onlyPackets not matching any IPv6 ACL.
acl6missesrate<Double>Read-onlyRate (/s) counter for acl6totmisses
acl6totpktsnat64<Double>Read-onlyPackets matching a NAT64 ACL6, resulting in a NAT64 translation.
acl6pktsnat64rate<Double>Read-onlyRate (/s) counter for acl6totpktsnat64
acl6totcount<Double>Read-onlyTotal number of ACL6 rules configured.
dfdacl6totcount<Double>Read-onlyTotal number of DFD ACL6 rules configured.
dfdacl6tothits<Double>Read-onlyPackets matching an dfd ACL6.
dfdacl6hitsrate<Double>Read-onlyRate (/s) counter for dfdacl6tothits
dfdacl6totmisses<Double>Read-onlyPackets not matching any DFD ACL6.
dfdacl6missesrate<Double>Read-onlyRate (/s) counter for dfdacl6totmisses
acl6perhits<Double>Read-onlyNumber of times the acl6 was hit
acl6perhitsrate<Double>Read-onlyRate (/s) counter for acl6perhits

Operations

(click to see Properties)

GET (ALL)| GET

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the Citrix ADC appliance, the URL is as follows:

    http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the Citrix ADC appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note:In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in redand placeholder content is marked in <green>.

get (all)

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/stat/nsacl6

Query-parameters:

args

http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/stat/nsacl6?args=acl6name:<String_value>,detail:<Boolean_value>,fullvalues:<Boolean_value>,ntimes:<Double_value>,logfile:<String_value>,clearstats:<String_value>

Use this query-parameter to get nsacl6 resources based on additional properties.

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "nsacl6": [ {
"acl6name":<String_value>,
"acl6pktsnatrate":<Double_value>,
"acl6missesrate":<Double_value>,
"acl6totmisses":<Double_value>,
"dfdacl6hitsrate":<Double_value>,
"acl6totpktsnat64":<Double_value>,
"acl6pktsnat64rate":<Double_value>,
"acl6totpktsnat":<Double_value>,
"dfdacl6tothits":<Double_value>,
"dfdacl6totmisses":<Double_value>,
"acl6perhitsrate":<Double_value>,
"acl6perhits":<Double_value>,
"acl6tothits":<Double_value>,
"acl6pktsbridgedrate":<Double_value>,
"acl6pktsallowedrate":<Double_value>,
"acl6totpktsbridged":<Double_value>,
"acl6totpktsdenied":<Double_value>,
"acl6totcount":<Double_value>,
"acl6totpktsallowed":<Double_value>,
"acl6pktsdeniedrate":<Double_value>,
"acl6hitsrate":<Double_value>,
"dfdacl6missesrate":<Double_value>,
"dfdacl6totcount":<Double_value>
}]}

get

URL:http://<Citrix-ADC-IP-address(NSIP)>/nitro/v1/stat/nsacl6/acl6name_value><String>

HTTP Method:GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN=<tokenvalue> Accept:application/json

Response:

HTTP Status Code on Success: 200 OK HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for Citrix ADC specific errors). The response payload provides details of the errorResponse Headers:

Content-Type:application/json

Response Payload:

{ "nsacl6": [ {
"acl6name":<String_value>,
"acl6pktsnatrate":<Double_value>,
"acl6missesrate":<Double_value>,
"acl6totmisses":<Double_value>,
"dfdacl6hitsrate":<Double_value>,
"acl6totpktsnat64":<Double_value>,
"acl6pktsnat64rate":<Double_value>,
"acl6totpktsnat":<Double_value>,
"dfdacl6tothits":<Double_value>,
"dfdacl6totmisses":<Double_value>,
"acl6perhitsrate":<Double_value>,
"acl6perhits":<Double_value>,
"acl6tothits":<Double_value>,
"acl6pktsbridgedrate":<Double_value>,
"acl6pktsallowedrate":<Double_value>,
"acl6totpktsbridged":<Double_value>,
"acl6totpktsdenied":<Double_value>,
"acl6totcount":<Double_value>,
"acl6totpktsallowed":<Double_value>,
"acl6pktsdeniedrate":<Double_value>,
"acl6hitsrate":<Double_value>,
"dfdacl6missesrate":<Double_value>,
"dfdacl6totcount":<Double_value>
}]}