app_unit
Configuration for AF APP Report table resource.
Properties
(click to see Operations )
Name | Data Type | Permissions | Description |
---|---|---|---|
__count | <Double> | Read-write | count.. |
cache_hits | <Double> | Read-write | Total requests to this APP for cache hits in given sampled timeframe.. |
mismatchCiphers | <String> | Read-write | SSL mismatch cipher failure..
Maximum length = 256 |
ssl_cipher_name | <String> | Read-write | SSL cipher name..
Maximum length = 256 |
http_content_type_name | <String> | Read-write | HTTP Content TYPE Name..
Maximum length = 256 |
total_bytes_cache_bypass | <Double> | Read-write | Cache Bypass total bytes accounted by this URL in sampled timeframe.. |
ic_non_cache_hits | <Double> | Read-write | Total requests to this APP for cache bypass in given sampled timeframe.. |
id | <String> | Read-write | Id is AppName.
Maximum length = 255 |
total_bytes_cache_miss | <Double> | Read-write | Cache Miss total bytes accounted by this URL in sampled timeframe.. |
vserver_count | <Double> | Read-write | Number of vservers behind CS or any other vserver. |
ic_miss | <Double> | Read-write | Total requests to this APP for cache miss in given sampled timeframe.. |
cache_miss | <Double> | Read-write | Total requests to this APP for cache miss in given sampled timeframe.. |
name | <String> | Read-write | AppName.
Maximum length = 255 |
total_bytes | <Double> | Read-write | Total bytes accounted by this URL in sampled timeframe.. |
percent_bw_saved | <Double> | Read-write | Percentage of bw save to this APP in given sampled timeframe.. |
server_response_time | <Double> | Read-write | Server response time.. |
network_latency_server_side | <Double> | Read-write | Network latency server side.. |
application_response_time | <Double> | Read-write | Application response time.. |
total_bytes_ic_hits | <Double> | Read-write | IC Cache Hits total bytes accounted by this URL in sampled timeframe.. |
total_bytes_cache_hits | <Double> | Read-write | Cache Hits total bytes accounted by this URL in sampled timeframe.. |
ssl_cipher_failure_backend | <String> | Read-write | SSL cipher failure backend..
Maximum length = 256 |
ssl_key_strength_name | <String> | Read-write | SSL key strength name..
Maximum length = 256 |
ic_no_store_reason | <String> | Read-write | ic_no_store_reason..
Maximum length = 256 |
unsupportedCiphers | <String> | Read-write | SSL unsupported cipher failure..
Maximum length = 256 |
network_latency_client_side | <Double> | Read-write | Network latency client side.. |
cache_bypass | <Double> | Read-write | Total requests to this APP for cache bypass in given sampled timeframe.. |
max_transaction_time | <Double> | Read-write | Last Transaction Time for this URL in the sampled timeframe.. |
total_bytes_ic_miss | <Double> | Read-write | Cache Miss total bytes accounted by this URL in sampled timeframe.. |
ssl_protocol_name | <String> | Read-write | SSL protocol name..
Maximum length = 256 |
ssl_certificate_name | <String> | Read-write | SSL certificate name..
Maximum length = 256 |
ssl_cipher_failure_frontend | <String> | Read-write | SSL cipher failure frontend..
Maximum length = 256 |
netscaler_processing_time | <Double> | Read-write | Citrix ADC processing time.. |
ip_address | <String> | Read-write | App Ip Address..
Maximum length = 255 |
percentage_usage | <Double> | Read-write | Percentage_usage of this APP in given sampled timeframe.. |
ic_hits | <Double> | Read-write | Total requests to this APP for cache hits in given sampled timeframe.. |
total_bytes_ic_reval | <Double> | Read-write | Cache Reval total bytes accounted by this URL in sampled timeframe.. |
rpt_sample_time | <Double> | Read-write | Report Sample time.. |
ic_reval | <Double> | Read-write | Total requests to this APP for cache bypass in given sampled timeframe.. |
ic_utilization | <Double> | Read-write | Total IC utilization in given sampled timeframe.. |
ssl_cipher_negotiated_cipher_name | <String> | Read-write | SSL cipher name..
Maximum length = 256 |
total_requests | <Double> | Read-write | Total requests to this APP in given sampled timeframe.. |
http_media_type_name | <String> | Read-write | HTTP MEDIA TYPE Name..
Maximum length = 30 |
Operations
(click to see Properties )
- GET (ALL)
Some options that you can use for each operations:
-
Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
-
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>
*Note:
*
Mandatory parameters are marked in
red
and placeholder content is marked in
green
The following parameters can be used in the nitro request : onerror <String_value>
Use this parameter to set the onerror status for nitro request. Applicable only for bulk requests.
Default value: EXIT
Possible values = EXIT, CONTINUE
get (all)
URL: https://<MGMT-IP>/nitro/v2/config/app_unit Query-parameters:
cr_enabled Use this query-parameter to indicate cr is enabled or not.
Possible Values: 0, 1 report_start_time Use this query-parameter to specify the start time from which the summary for report is considered.
Possible Values: time in milli seconds report_end_time Use this query-parameter to specify the end time until where summary for report is considered.
Possible Values: time in milli seconds asc Use this query-parameter to specify whether the results should be in ascending order or not.
Possible Values: yes, no sla_enabled Use this query-parameter to indicate sla is enabled or not.
Possible Values: 0, 1 order_by Use this query-parameter to get the result that is ordered by the given property.
Possible Values: total_requests, total_bytes, application_response_time type Use this query-parameter to specify the type.
Possible Values: total_requests, total_bytes, application_response_time HTTPS Method: GET
Response: HTTPS Status Code on Success: 200 OK HTTPS Status Code on Failure: 4xx (for general HTTPS errors) or 5xx (for NetScaler-MAS-specific errors). The response payload provides details of the error
Response Headers:
Content-Type:application/json
Response Payload:
{ "errorcode": 0, "message": "Done", "severity": ;ltString_value;gt, "app_unit":[{
"__count":<Double_value>,
"cache_hits":<Double_value>,
"mismatchCiphers":<String_value>,
"ssl_cipher_name":<String_value>,
"http_content_type_name":<String_value>,
"total_bytes_cache_bypass":<Double_value>,
"ic_non_cache_hits":<Double_value>,
"id":<String_value>,
"total_bytes_cache_miss":<Double_value>,
"operating_system_name":<String_value>,
"vserver_count":<Double_value>,
"ic_miss":<Double_value>,
"vpn_user_name":<String_value>,
"cache_miss":<Double_value>,
"http_req_method_name":<String_value>,
"name":<String_value>,
"total_bytes":<Double_value>,
"user_agent_name":<String_value>,
"percent_bw_saved":<Double_value>,
"server_response_time":<Double_value>,
"network_latency_server_side":<Double_value>,
"application_response_time":<Double_value>,
"client_ip_address":<String_value>,
"total_bytes_ic_hits":<Double_value>,
"total_bytes_cache_hits":<Double_value>,
"ssl_cipher_failure_backend":<String_value>,
"ssl_key_strength_name":<String_value>,
"ic_no_store_reason":<String_value>,
"http_resp_status_name":<String_value>,
"unsupportedCiphers":<String_value>,
"network_latency_client_side":<Double_value>,
"cache_bypass":<Double_value>,
"uri_url":<String_value>,
"max_transaction_time":<Double_value>,
"total_bytes_ic_miss":<Double_value>,
"ssl_protocol_name":<String_value>,
"ssl_certificate_name":<String_value>,
"ssl_cipher_failure_frontend":<String_value>,
"netscaler_processing_time":<Double_value>,
"ip_address":<String_value>,
"percentage_usage":<Double_value>,
"ic_hits":<Double_value>,
"server_ip_address":<String_value>,
"total_bytes_ic_reval":<Double_value>,
"rpt_sample_time":<Double_value>,
"device_ip_address":<String_value>,
"domain_name":<String_value>,
"ic_reval":<Double_value>,
"ic_utilization":<Double_value>,
"ssl_cipher_negotiated_cipher_name":<String_value>,
"total_requests":<Double_value>,
"http_media_type_name":<String_value>}]}
<!--NeedCopy-->